What is the fuel consumption per 100 kilometers for the Coaster?

What is the method for replacing the headlights of the Arrizo 5?

Arrizo 5 headlight replacement method is as follows: 1. Turn off the vehicle's power and open the engine hood; 2. Unplug the headlight connector that needs to be replaced; 3. Rotate the old bulb counterclockwise to remove it, then install the new bulb. Taking the 2021 Arrizo 5 as an example, it belongs to the compact car category, with body dimensions of: length 4572mm, width 1825mm, height 1482mm, wheelbase 2670mm, fuel tank capacity 48l, and curb weight 1325kg. The 2021 Arrizo 5 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 90PS, maximum power of 66kW, and maximum torque of 130Nm, paired with a 5-speed manual transmission.

9

4

Share

Does the new Santana have a reverse radar?

New Santana does not have a reverse radar. Drilling radar mounting holes: Use the special drill bit provided with the product to drill radar mounting holes in the front and rear bumpers of the vehicle. Installing the reverse radar: Remove the inner cover of the trunk and thread the radar wiring harness from the rear bumper mounting hole to the trunk. At the same time, thread the front radar from the front bumper mounting hole through the engine compartment to the main driver's compartment and connect it to the trunk through the door gap. Connecting the wiring: Connect the red wiring harness of the main unit to the reverse light wire and the white wiring harness to the brake light wire. Connecting the display: Finally, connect the reverse radar display and sensor wiring harness to the main unit. The reverse radar display needs to be connected from the trunk forward to the main driver's compartment.

2

Share

At What Temperature Should Winter Engine Oil Be Changed?

Engine oil should be changed when the temperature is around zero degrees Celsius. After enduring an autumn season, which typically brings strong winds and heavy rainfall, vehicles often suffer significant wear and tear. Performing maintenance and changing the oil before winter sets in is highly beneficial for ensuring the vehicle's safe operation during the colder months. The benefits of changing engine oil: Regular oil changes provide optimal lubrication, cooling, and cleaning for the engine. Precautions for changing engine oil: Avoid changing oil when the engine is cold. In cold conditions, oil viscosity increases due to low temperatures, impairing its flow characteristics. Changing oil under these circumstances may result in incomplete drainage of the old oil. Additionally, it's crucial to add the correct amount of oil—overfilling can increase friction resistance among engine components, reduce engine power, and in severe cases, lead to oil entering the combustion chamber. This can cause oil burning, blue smoke from the exhaust, increased carbon deposits, and even engine knocking or cylinder scoring.

18

2

Share

Should a car with a dual-clutch transmission be put in N or D gear when waiting at a red light?

A car with a dual-clutch transmission should be put in N gear when waiting at a red light. Shifting to N gear reduces fuel consumption without accelerating transmission wear. Introduction to dual-clutch transmission: A wet dual-clutch is a type of dual-clutch transmission where the clutch plates are immersed in transmission oil. The characteristics of a dual-clutch transmission include: DSG transmission improves vehicle fuel economy; it is highly responsive; and the vehicle does not experience power interruption during acceleration, resulting in stronger and smoother acceleration. Introduction to car gears: P gear is the parking gear, used for long-term parking of the vehicle. R gear is the reverse gear, engaged when the vehicle needs to move backward. N gear is the neutral gear, used when the vehicle is parked for a short time without turning off the engine. D gear is the drive gear.

1

4

Share

What are the reasons for the reverse camera not displaying?

The reasons for the reverse camera not displaying are: 1. The reverse camera is damaged; 2. There is an issue with the display settings; 3. There is a problem with the wiring. The function of the reverse camera is: It allows the driver to see the situation behind the car on the display when reversing, avoiding accidents caused by the driver not being able to see behind the car, thus making reversing safer for the driver. The working principle of the reverse camera is: A wide-angle infrared camera device is installed at the rear of the car, and through the display inside the car, the driver can clearly see the situation behind the car. The steps for wiring the reverse camera are: 1. Disconnect the battery power supply connection; 2. Remove the small license plate lamp and pass the wiring harness through the position of the small license plate lamp; 3. Connect the adapter cable, with the red wire connecting to the positive pole and the black wire connecting to the negative pole, and connect the signal wire of the camera to the signal extension cable; 4. Connect the signal extension cable to the display; 5. After completing the wiring, restore the battery power supply.

7

2

Share

What Causes the Front Brake Squeaking on a Motorcycle?

Front brake squeaking on a motorcycle may be caused by tiny sand particles getting between the brake pads and disc, resulting in friction-induced noise. This situation generally does not require repair; simply riding the motorcycle for a while can help the small sand particles fall out. Braking Principle: The working principle of brakes mainly relies on friction. The kinetic energy of the moving vehicle is converted into thermal energy through the friction between the brake pads and the brake disc (or drum), as well as between the tires and the ground, bringing the vehicle to a stop. A good and efficient braking system must provide stable, sufficient, and controllable braking force, along with excellent hydraulic transmission and heat dissipation capabilities. This ensures that the force applied by the driver on the brake pedal is effectively transmitted to the master cylinder and individual wheel cylinders, while avoiding hydraulic failure and brake fade caused by excessive heat. Brake Pad Lifespan: The replacement of brake pads depends on how long they have been in use. Generally, brake pads need to be replaced after covering a distance of more than 80,000 kilometers. However, if you hear a grinding noise from the wheels, the brake pads should be replaced regardless of the mileage.

2

5

Share

What is the fuel consumption per 100 kilometers for the Coaster?

What is the method for replacing the headlights of the Arrizo 5?

Does the new Santana have a reverse radar?

At What Temperature Should Winter Engine Oil Be Changed?

Should a car with a dual-clutch transmission be put in N or D gear when waiting at a red light?

What are the reasons for the reverse camera not displaying?

What Causes the Front Brake Squeaking on a Motorcycle?

Is Battery Repair Fluid Effective?

Does exceeding the second car maintenance by three months count as warranty void?

What car is represented by five small sticks?

Should Car Anti-Fog Spray Be Applied Inside or Outside?