What is the fuel consumption per 100 kilometers for the Chevrolet New Cruze 1.5 automatic?

1 Answers
DeBrynlee
07/29/25 7:21pm
The average fuel consumption for the New Cruze 1.5L automatic transmission is 7.5L/100km, while the 1.4T dual-clutch model consumes 7.4L/100km. Additional information: 1. Transmission: It is equipped with a 6-speed automatic manual transmission featuring auto start-stop functionality. The transmission is entirely new and differs from the 6AT in the older Cruze models, offering improved shift logic and smoother gear changes. The shifting action is relatively light, with well-controlled gear shift shock. 2. Fuel consumption: The 2018 Cruze has a combined fuel consumption ranging from 5.7L to 6.2L per 100 kilometers. Specifically, the 1.5L manual, 1.5L automatic sedan, 1.5L automatic hatchback, and 1.4T dual-clutch versions consume 5.9L, 6.1L, 6.2L, and 5.7L per 100 kilometers, respectively. Based on actual test data, the 1.5L automatic and 1.4T dual-clutch models achieve around 7.5L per 100 kilometers in urban driving conditions (average speed of about 30km/h), with even lower consumption on highways, closely matching the official figures. Actual fuel consumption may vary depending on individual driving habits and usage scenarios.
Was this review help?
16
5
Share
More Forum Discussions

How to Reset the Tire Pressure Fault on a 2017 Magotan?

To address the tire pressure fault on a 2017 Magotan, the tire pressure issue should be resolved first. There are two methods to reset the Magotan's tire pressure warning: 1. Operate the buttons on the multifunction steering wheel and select the "Tire Pressure" option in the multifunction menu to store the current tire pressure status. 2. There is a tire pressure reset switch located beside the gear lever. With the ignition switch turned on, press and hold this button until you hear a beep, indicating the reset is complete. There are several scenarios for tire pressure faults: Rapid air leakage, high pressure, low pressure, or high temperature. The indicator light serves as a warning to the driver based on tire pressure and related issues. For instance, driving over uneven terrain may cause uneven tire pressure changes, triggering the light. If the tire pressure light is off, it's advisable to check the tire pressure monitor's functionality before driving. If the monitor fails to alert during a tire pressure issue, it may be malfunctioning. If the ON/START ignition switch causes both the indicator and TPMS lights to illuminate for 2 seconds before turning off, it could indicate that the vehicle's original receiver hasn't been properly learned and bound, or the receiver controller was replaced without proper learning and binding.
12
5
Share

What is the real reputation of Volkswagen's dry dual-clutch transmission?

Volkswagen's 7-speed dry dual-clutch transmission has a polarized reputation in the market. Explanation of Volkswagen's 7-speed dry dual-clutch transmission: As the name suggests, Volkswagen's 7-speed dry dual-clutch transmission has some internal structures without lubrication oil, aiming to save the cost of a few liters of transmission oil. The transmission features two separate oil chambers in its oil circuit design, using less than half the oil volume of an automatic transmission. This special construction allows it to withstand higher torque output while maintaining low maintenance costs. However, the disadvantages of Volkswagen's 7-speed dry dual-clutch transmission are also evident. In traffic congestion, due to insufficient lubrication oil, the heat generated by the transmission cannot dissipate in time, leading to sluggish gear shifting and strong jerking sensations. Therefore, it is crucial to be cautious when choosing Volkswagen's 7-speed dry dual-clutch transmission. Considerations when choosing Volkswagen's dual-clutch transmission: Overall, dual-clutch transmissions offer smooth and fast gear shifting with good fuel economy. It should be noted that the failure rate of dry dual-clutch transmissions is higher than that of wet dual-clutch transmissions. In the past, Volkswagen had a very high market share in the United States, but due to the oil crisis leading to rising fuel prices, Japanese cars with CVT transmissions, which excel in smoothness and fuel economy, gained favor among American consumers.
18
2
Share

What are the reasons for a manual transmission new Jetta not starting?

Manual transmission new Jetta not starting reasons are as follows: 1. Battery depletion: Battery depletion is one of the most common reasons for a car not starting. A depleted battery usually manifests as the starter not working or rotating insufficiently when attempting to start. In such cases, call the service station for rescue, or find another car to jump-start, or temporarily start the car, after which the battery must be recharged at the service station. 2. Fuel flow obstruction: Generally manifests as no oil pressure in the engine fuel supply pipe. This situation often occurs on particularly cold mornings, caused by long-term dirt in the fuel line. At extremely low temperatures, water and debris mix to block the fuel line, resulting in failure to start. In this case, place the car in a warm environment, and it will start after a while, or use the method of cleaning the fuel line for a complete solution. 3. Poor ignition system performance: On particularly cold days, due to low intake temperature, fuel atomization in the cylinder is poor. If combined with insufficient ignition energy, the result is cylinder flooding, where excessive fuel accumulates in the cylinder, exceeding the ignition limit concentration and preventing the car from starting. In this case, unscrew the spark plug to wipe off the oil between the electrodes, and the car will start after reinstallation. A thorough solution is to check the ignition system and eliminate the causes of low ignition energy, such as spark plug electrode gap, ignition coil energy, high-voltage line condition, etc.
1
2
Share

Is the Difference Between Seat Subwoofer and Trunk Subwoofer Significant?

Seat subwoofers and trunk subwoofers do not differ significantly, and trunk installation is generally preferred with appropriate volume levels. Below is an introduction to car subwoofers: 1. Principle: The internal amplifier circuit divides sound into several wavelength segments through a crossover. The mid-to-high frequency segments (mid-high tones) are output to satellite speakers, while the mid-to-low frequency segments (mid-low tones) are output to the subwoofer. Typically, a subwoofer produces long-wave sounds between 20-200Hz, which are easily heard but difficult to localize due to their long wavelengths. These long-wave sounds are transmitted through a bass reflex port, resonating with satellite speakers. The combined weak bass from the subwoofer and satellite speakers is then reproduced by the satellite speakers, creating a vibrant bass effect that seems to originate from the satellite speakers. 2. Function: The subwoofer enhances the low-frequency range, particularly the long-wave segments (below 100Hz, including infrasound, which is inaudible but effective). Since regular speakers, limited by size, cannot produce low-frequency sounds with longer wavelengths, a larger subwoofer is required to generate intense low-frequency effects. Additionally, bass waves, being the longest, have lower efficiency in energy conversion, making them more power-consuming to produce the same output power, thus requiring higher input power.
4
1
Share

What does it mean that Citroen can perform Qinggong?

Citroen can perform Qinggong refers to the severe shaking of Citroen cars when driving on bumpy roads and their tendency to feel unstable at high speeds. Vehicle Introduction: Citroen has a century-long history of car manufacturing (since 1915) and is considered on par with Mercedes-Benz and BMW in Europe. The world's first front-wheel-drive car was the Citroen 7A, featuring front-wheel drive, a monocoque body structure without a chassis, and innovative suspension systems like torsion bar suspension for single-wheel damping. Additionally, after Saab developed the turbocharger, Citroen became the first car in the world to be equipped with a turbocharger. These are all milestone achievements in automotive history. Funny Rhyme: Buick is thick, Lexus is slow, Ford loves broken axles, Mercedes parts bring sorrow, Volkswagen burns oil. Maintenance fees, Audi is pricey, Nissan shells are brittle, Peugeot gets bashed by many, Suzuki has retreated. Big Jaguar, high fuel consumption, Hyundai feels light as a feather, Chevrolet like a sanitary pad, BMW loves to burn. The nouveau riche love Land Rover, Honda has lost speed, where there's a road there's a Toyota, but it can't stop. Mazda, noisy as can be, the underdogs love Kia, Volkswagen plays dead with Skoda, and now there's Jetta. Citroen, can perform Qinggong, the chassis is most authentic, Cadillac is in price cuts, and Hongqi is all the rage.
3
2
Share

Can you drive over the white grid lines at intersections?

White grid lines on the road surface are channelizing lines and should not be driven over. According to regulations, channelizing lines mainly consist of one or several white V-shaped or diagonal stripe areas set up based on the intersection terrain, indicating that vehicles must follow the prescribed route and must not drive over or cross these lines. The following types of road lines should not be driven over: Yellow solid lines: Currently, domestic yellow solid lines come in two types—double yellow lines and single yellow lines—essentially serving as prohibition lines. They are generally used to separate opposing traffic. If a yellow solid line is in the middle of the road, whether it is a double or single yellow line, it should not be crossed. White solid lines: White solid lines are the most common road markings, used to separate lanes traveling in the same direction, helping drivers stay on their designated paths. These lines appear on urban roads and intersections, standardizing driving routes and greatly improving travel safety. Yellow grid lines: The purpose of yellow grid lines is to prohibit parking. They are most commonly found at the entrances of government buildings. Vehicles must not park arbitrarily in areas marked with yellow grid lines, as doing so can obstruct traffic flow and hinder vehicles exiting the premises. These areas are strictly for passing through, not stopping. Channelizing lines: These are V-shaped or triangular areas set up at intersections based on actual road conditions, designed to help drivers accurately determine the direction for going straight or turning right, or to serve as waiting areas for pedestrians at traffic lights. Such markings are commonly found at highway ramps, multi-forked intersections, and complex large crossroads, playing a crucial role in guiding traffic.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.