What is the fuel consumption per 100 kilometers for the Changan CS15?

2 Answers
DiSamantha
07/30/25 1:43am
The fuel consumption per 100 kilometers for the Changan CS15 is 8L. Below are the specific details regarding the fuel consumption of the Changan CS15: 1. Explanation: Most of the time, it is difficult to avoid congested road conditions, especially in urban areas where traffic jams are most common at intersections with many traffic lights. Frequent acceleration and deceleration while following other vehicles are also unavoidable, leading to particularly high fuel consumption under such conditions. It is recommended to develop a good habit of regularly checking the dashboard to spot any abnormalities early and address them promptly. 2. Fuel Consumption Calculation Explanation: Vehicle fuel consumption is calculated based on the amount of fuel consumed per 100 kilometers (usually referring to 100 kilometers). The method for calculating actual fuel consumption is: average fuel consumption = (total fuel added - last fuel added) / distance traveled.
Was this review help?
8
3
Share
MalachiDella
08/15/25 7:32am
I've been driving the Changan CS15 for quite some time now, with an average fuel consumption of around 7.5 liters per 100 kilometers. The official data claims a combined fuel consumption of 6.3 liters, but in reality, it can rise above 8 liters in city traffic jams and drop below 6 liters on smooth highways. The car is equipped with a 1.5-liter engine, and the manual transmission might save a bit more fuel, while the automatic version is slightly higher. My fuel-saving tips include avoiding sudden acceleration and hard braking, keeping tire pressure within the manufacturer's recommended range, and regularly changing the engine oil and air filter. Using the air conditioning in summer can increase consumption by about 1 liter, so it's good to choose the right time to open windows for ventilation. Overall, as a compact SUV, the CS15 has moderate fuel consumption and is easy to maintain. If you frequently drive long distances, it can be more cost-effective. In short, don't just focus on the numbers; your driving habits are crucial.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What Causes Loud Car Noises?

Loud car noises can be attributed to several reasons: 1. Engine working noise, which can be mitigated by installing sound insulation cotton to block the noise from reaching the cabin; 2. Tire noise, which is unavoidable, but can be reduced by switching to tires with better noise reduction effects if possible; 3. Wind noise while driving, caused by wind pressure exceeding the door's sealing resistance and entering the car, can be addressed by adding sealing strips or sound insulation cotton on the door frames; 4. Chassis noise, as the chassis bears the weight of the entire car and is subjected to noise interference. During driving, the chassis rubs against the air, and the transmission system works underneath the car, combined with tire noise. Applying sound insulation cotton and vibration damping plates at the bottom of the trunk can significantly improve the situation.
2
4
Share

How to Cut Side Window Tint Film for Cars?

Method for cutting side window tint film: First, position it, then use a knife to cut along the edge of the glass. Additionally, it's recommended to cut a triangle at the inner corner for a more secure fit. Trim the edges according to the shape of the glass, leaving one to two centimeters extra. If it's cut too short and aligns exactly with the top edge of the glass, it may bulge when the window is rolled up due to friction, affecting aesthetics. Taking solar film as an example, the installation process is: 1. Clean the glass; if there's existing solar film, remove it first, then spray adhesive remover to eliminate any residue; 2. Cut the solar film; 3. Begin applying the film; 4. Heat the film, a crucial step to shape it; 5. After application, perform a self-check, such as looking for bubbles on the glass; 6. Avoid rolling the windows up or down immediately after completion to prevent affecting the film's effectiveness.
17
2
Share

What does BSD mean in cars?

BSD in cars refers to the Blind Spot Detection system. This system uses digital infrared cameras installed in the car's door mirrors to monitor the traffic on both sides of the vehicle, allowing for safer driving. When a vehicle approaches or is in the blind spot, the BSD system alerts the driver through audible and visual warnings. The Blind Spot Detection system enhances vehicle safety by reducing the likelihood of collision accidents during lane changes. The reason collisions are more likely during lane changes is due to blind spots in the car's rearview mirrors. When another vehicle is in the blind spot, it cannot be seen through the rearview mirror, which could potentially lead to a traffic accident if the car changes lanes.
18
5
Share

Where is the engine number of the JMC Ford Territory located?

JMC Ford Territory's engine number is located under the hood, in the front part of the vehicle. The Ford Territory features a youthful exterior design, primarily targeting urban young consumers. Its full and robust shape gives a sense of steadiness and reliability, while the floating roof design is very eye-catching, enhancing the overall sporty feel. The JMC Ford Territory is a compact SUV under the JMC Ford brand, equipped with a MacPherson independent front suspension and a multi-link independent rear suspension. The vehicle dimensions are 4580mm in length, 1936mm in width, and 1674mm in height, with a wheelbase of 2716mm.
5
0
Share

What is the engine model of the new X5?

The engine models of the new X5 are: xDrive50i, X5 xDrive35d, and X5 xDrive35i, equipped with a 4.4L V8 twin-turbocharged engine, a 3.0L inline six-cylinder diesel engine, and a 3.0L inline six-cylinder gasoline engine, respectively. In terms of body dimensions, the new X5 has a body length of 4973mm, an increase of 113mm compared to the current model. The width has increased to 1948mm, and the wheelbase has been extended to 2968mm, which is 35mm longer than the current model. The larger body dimensions of the new X5 provide advantages in space, particularly the increased length and width, making the interior more spacious and comfortable.
14
2
Share

What type of vehicle is the Vellfire?

Vellfire is a commercial vehicle, which is an MPV model launched by Toyota and is a counterpart to the Toyota Alphard. The front fascia of the Vellfire features an armor-inspired design, with the emblem on the grille changed from Toyota's bullhead logo to the Alphard-specific emblem. In terms of body dimensions, the Vellfire measures 4935mm in length, 1850mm in width, and 1950mm in height, with a wheelbase of 3000mm. The interior is wrapped in a large amount of genuine leather and soft materials, and the seats adopt an aviation seat design concept, with headrests featuring massage functions, significantly enhancing ride comfort.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.