···
Log in / Register

What is the fuel consumption per 100 kilometers for the CF400?

3 Answers
AlanaRose
09/07/25 8:29am
The fuel consumption per 100 kilometers for the CF400 motorcycle is 4.5 liters, and it can be higher with aggressive driving. CF400 fuel consumption per 100 kilometers: The fuel consumption per 100 kilometers for this motorcycle is 4.5 liters. With aggressive driving, the consumption will increase. A motorcycle's fuel consumption is not only related to the motorcycle itself but also to the rider's driving habits and road conditions. Poor driving habits and frequent driving in congested areas will result in higher fuel consumption. CF400 0-100 km/h acceleration time: The CF400 motorcycle's 0 to 100 kilometers per hour acceleration time is approximately 5.6 seconds. This time can be affected by temperature and tire conditions.
Was this review help?
20
4
Share
VeraAnn
09/19/25 7:30am
I've been riding the CFMoto 400 for a while, and the actual fuel consumption is usually around 4 liters per 100 kilometers, but it depends on road conditions and riding habits. In city traffic with frequent stops and starts, fuel consumption can rise to over 5 liters, while highway cruising can drop it to around 3.5 liters due to lower engine wind resistance and stable RPM. Factors affecting fuel consumption include engine tuning (the CFMoto 400 uses a single-cylinder four-stroke design), tire pressure (low pressure increases friction), vehicle weight and load (higher consumption when fully loaded), and weather conditions (strong winds increase drag and fuel consumption). Regular maintenance, such as checking the air filter and spark plugs, is recommended, as well as avoiding sudden acceleration and braking to save fuel. Riding records show that traveling 1000 kilometers a month costs about 320 yuan in fuel (calculated at 8 yuan per liter), which is relatively economical, but safety should always be a priority.
Was this review help?
18
1
Share
Expand All
ArcherLynn
11/02/25 7:53am
From my experience, the CFMOTO 400 averages 4 liters per 100 kilometers in fuel consumption, but it varies by rider. My friend's bike consumes up to 5 liters in city traffic due to frequent stops and starts in congestion, while I maintain around 3.8 liters when riding in suburban areas. The 400cc liquid-cooled engine is relatively fuel-efficient, but wind resistance at higher speeds can increase consumption to about 4 liters. Overloading with passengers or cargo also raises fuel usage, so travel light. Tracking fuel consumption is simple: reset the odometer after refueling, then divide liters used by kilometers traveled at the next fill-up. Overall, it's an economical bike, but don't neglect regular oil changes and chain lubrication, which help maintain low fuel consumption. Always check the fuel system before long trips to prevent surprises—it saves money and ensures peace of mind.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

Is the Right Side Too Wide When Reversing into the Right Parking Spot Due to Steering Too Early or Too Late?

If the right side is too wide when reversing into the right parking spot, it means the steering wheel was turned too late. By observing the distance between the car body and the corner of the parking spot, if there is still space, there is a chance to correct it by straightening the wheels. Below is an introduction to the knowledge related to the Subject 2 driving test: 1. Definition: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small cars (C1/C2), the test items include reversing into a parking spot, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns)—five mandatory test items (some regions also include a sixth item: high-speed toll card collection). 2. Reversing Tips: Maintain a steady speed: Control the car speed at a slow and stable pace. (Release the clutch slowly and steadily, avoiding sudden lifts or frequent pressing and lifting). Correct steering technique: Use the correct method to turn the steering wheel; otherwise, it will be difficult to control the car's direction, and you won't know how much to turn the wheel back or whether it has been straightened.
12
0
Share

What is the sequence of 4S dealership handling license plate registration and vehicle pickup?

4S dealership handling license plate registration and vehicle pickup procedures are as follows: 1. Pay deposit to order the car: In most cases nowadays, consumers usually place an order first when purchasing a car, which requires paying a deposit and signing an order contract with the 4S store. 2. Pay the balance: When the new car arrives at the store or is ready, the salesperson will contact the owner to come and pay the balance. It should be noted that before paying the balance, the car should be carefully inspected to ensure it is in good condition. 3. Pick up the car: After paying the balance, it means the car already belongs to the owner. At this time, a temporary license plate can be directly processed at the 4S store, which usually takes about half an hour. Once the temporary license plate is issued, the car can be driven on the road. 4. Handle license plate registration: Since the owner has asked the 4S store to handle the license plate registration, all procedures for the new car will be handled by the 4S store. The owner only needs to bring the required documents and drive the new car to the vehicle management office at the agreed time, and then just sit in the car. All license plate registration procedures will be completed by the agent. 5. Install the license plate: Once the official license plate is issued, it only needs to be installed on the car. At this step, it means all car purchase procedures have been completed.
14
5
Share

What is the definition of OBD port pins?

OBD port pin definition refers to the On-Board Diagnostics system. Below are specific details about the OBD interface: The functions of the OBD interface include: 1. Continuous fault detection: It constantly monitors the faults in components and systems, ensuring that vehicle emissions do not exceed the requirements of OBD regulations throughout the vehicle's lifespan. 2. Fault alert: When an emission-related fault is detected, the OBD system can trigger an alert using the MIL (Malfunction Indicator Lamp) on the dashboard. 3. Emission reduction: Faulty vehicles can be repaired promptly, thereby reducing emissions. 4. Rapid diagnosis: The OBD system assists technicians in quickly diagnosing issues and performing targeted repairs, lowering maintenance costs.
7
0
Share

What are National 3 Vehicles?

National 3 vehicles refer to those that comply with the third-generation national emission standards. Here is some information about National 3 vehicles: 1. National 3: The National 3 standard is China's third-stage vehicle emission standard. The National 3 emission standard is equivalent to the Euro III emission standard, meaning the content of tailpipe pollutants is similar to that of Euro III. The difference is that new vehicles must be equipped with an OBD, or On-Board Diagnostics system. 2. On-Board Diagnostics System: The On-Board Diagnostics system features an increased number of detection points and detection systems, with oxygen sensors installed at both the inlet and outlet of the three-way catalytic converter.
3
3
Share

Are Private Ambulances Legal?

Private ambulances are not legal. Here are the principles for the use of ambulances: 1. Hospital departments have the right to use them: As work vehicles, ambulances can be applied for by various departments to handle other work matters based on meeting clinical medical needs. 2. Usage costs are included in departmental expenses: The costs incurred by clinical departments for office use of ambulances are calculated according to the school's vehicle billing standards, included in the department's monthly cost accounting, and deducted from the department's budget. 3. Standard billing applies for usage: Clinical departments using ambulances to transport patients are billed according to the prescribed standards, with charges recorded by the department head nurse or nurse. The costs incurred by the ambulance are deducted from the department's budget. 4. Regulations for administrative departments: Administrative departments use ambulances according to budget regulations. If usage exceeds the budget, the incurred costs are deducted from the department's bonus according to the school's vehicle billing standards.
18
0
Share

How does the Hyundai Mistra automatically lock?

Mistra automatic locking does not require settings. When the vehicle speed reaches the computer-set speed (usually set by the manufacturer, mostly between 10 km/h to 20 km/h), the lock button will automatically engage to prevent accidental door opening, which is the most common automatic locking method adopted by many vehicle models. More details are as follows: 1. The purpose of the automatic locking function is anti-theft, allowing the doors to lock quickly after driving starts to prevent door pull robberies during traffic jams or at red lights, providing a certain level of security. 2. It offers protection for child passengers inside the car, preventing young children from opening the door handle while the vehicle is in motion.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.