What is the fuel consumption per 100 kilometers for the BMW 530?

How to Change the Transmission Oil for Magotan?

Method for changing the transmission oil of Magotan: First, add the transmission cleaner into the transmission. To allow the cleaner to decompose the oil film on the gears as much as possible, lift the car and switch between D and R gears, running for 5 to 10 minutes. After these two steps, the automatic transmission will be cleaned. Then, drain the old oil. However, due to long-term use, a single cleaning cannot thoroughly clean the transmission, so this cleaning process needs to be repeated twice. Magotan is a mid-size car launched by FAW-Volkswagen. The body dimensions of the Magotan are 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm.

1

3

Share

What is the appropriate speed for a novice driver on the highway for the first time?

According to the "Road Traffic Safety Law Implementation Regulations," the minimum speed on the highway must not be less than 60 kilometers per hour, and the maximum speed must not exceed 120 kilometers per hour. Novice drivers can drive a bit slower on the highway, such as 80 kilometers per hour, but they must not occupy the overtaking lane. Below are some precautions for novice drivers on the highway: 1. Conduct a vehicle inspection in advance, focusing on fuel, oil, tire pressure, lights, etc., and plan the route. It is best to have an experienced driver with at least 3 years of driving experience accompany you. 2. Unlike regular roads, highways have speed limits. The minimum speed must not be less than 60 kilometers per hour, and the maximum speed must not exceed 120 kilometers per hour. Therefore, as a novice driver, it is acceptable to drive at a lower speed, but do not go below the minimum limit. According to traffic regulations, driving below the minimum speed limit on the highway will result in a 3-point penalty. 3. Follow road signs and drive in the appropriate lane. If you need to overtake, always signal in advance, check the rearview mirror, and then move into the overtaking lane. After overtaking, follow the same steps: signal in advance, check the rearview mirror, and return to the driving lane. 4. Due to the high speed on the highway, road signs can pass by very quickly. Therefore, pay close attention to signs or navigation. If you miss an exit, do not panic or attempt to brake suddenly or make a U-turn. Instead, maintain your speed and continue driving to the next exit to return to your original route. 5. If you feel drowsy, make sure to rest at a service area. Never drive while fatigued, as the consequences can be severe. 6. Maintain a safe following distance. Novice drivers, due to their lack of experience, may misjudge situations. Therefore, control your speed and keep a greater distance from the vehicle in front of you.

19

1

Share

Are There Fake Great Wall Antifreeze Products?

Great Wall Antifreeze can be counterfeited. Authentic Great Wall Antifreeze containers or caps feature anti-counterfeiting labels, which can be verified by contacting the Great Wall customer service hotline. How to Choose Antifreeze: The key specifications for antifreeze are freezing point and boiling point. Market offerings include -15°C, -25°C, -30°C, and -40°C variants. Select a product with a freezing point at least 10°C below your region's lowest recorded temperature. Can Different Antifreeze Brands Be Mixed? Always use the same brand of antifreeze. Different brands employ varying formulations, and mixing them may trigger chemical reactions between additives, rendering them ineffective. Functions of Antifreeze: Antifreeze is a specially formulated coolant primarily used in liquid-cooled engine systems. It provides winter freeze protection, summer boil-over prevention, year-round scale inhibition, and corrosion resistance.

3

4

Share

What to Prepare for the First Maintenance?

Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; vehicle owner's ID card; vehicle registration certificate; vehicle purchase invoice. Take these to the designated first maintenance facility for the vehicle's initial service. Important note: Schedule an appointment with the 4S store in advance. The first maintenance refers to the initial service after a new car has been driven. The specific timing varies by vehicle, generally around 5,000 kilometers or six months. It's crucial to attend the first maintenance on time, neither early nor late. Completing the first maintenance signifies the end of the vehicle's break-in period, allowing it to be driven under standard load and normal speed as required by the manufacturer. The first maintenance period is calculated from the date of vehicle pickup, with two indicators: mileage and time. Whichever comes first serves as the standard. First maintenance tasks include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels, inspecting the generator belt and wiper blades for damage, checking tire pressure, and examining tires for damage or bulges. Estimated time: Completing all tasks takes approximately 2 hours. The most critical aspect of a new car's first maintenance is changing the engine oil and oil filter. When replacing the oil, the oil filter must also be changed. The choice of engine oil should refer to the "Vehicle User Maintenance Manual," as different vehicle models require different oil specifications. Maintenance precautions: Do not rinse the interior of the car with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It's important to note that the car's interior should not be directly washed with water. If floor mats are dirty, use a vacuum cleaner or remove them to scrub with a brush and detergent, then dry before replacing. The rubber mats under the driver's floor have many drainage holes. Water entering these areas won't dry naturally but will flow through the holes, potentially causing corrosion in the transmission and other parts. The best practice is to vacuum clean and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: If the car's antifreeze level is low, it's advisable to drain the existing antifreeze and refill with the same brand. Different brands of antifreeze have varying chemical properties, and mixing them can lead to corrosion due to incompatible additives. Always use the same brand to avoid unnecessary issues. Do not lubricate wheel bolts and nuts: When bolts on a moving car rust, they are often oiled to restore functionality. However, applying lubricant to wheel bolts and nuts can pose safety risks. At high speeds, lubricated bolts and nuts may loosen or even fall off, leading to driving hazards. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) car: EFI vehicles differ from conventional cars, as their fuel injection control system automatically adjusts fuel supply based on engine temperature and operating conditions, ensuring smooth starting without pressing the accelerator.

13

1

Share

Where is the rearview mirror heating button on the Lynk & Co 03?

The rearview mirror heating button on the Lynk & Co 03 is located below the vehicle's central control screen, within the air conditioning control area. It is the last button among the four buttons in the air conditioning control area, featuring an icon with a rectangle and three curved lines with arrows extending from the bottom to the top. It can be used when the vehicle is powered on, and when activated, it simultaneously turns on the rear window heating function. The rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for the driver to manually wipe the mirrors frequently, thereby reducing driving hazards. How to use the rearview mirror heating function: The rearview mirror heating function generally has two activation methods. One is combined with the electric rearview mirror adjustment button, where rotating the knob activates it. The other is located on the air conditioning control panel, where pressing the heating button activates it. There is no need to manually adjust the angle, as the driver's side has adjustment buttons. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat will dissipate from the left and right rearview mirrors. Simultaneously, as the temperature rises and evaporates, water droplets on the mirror surface will become smaller, and fog will gradually disappear, thereby heating the mirror and removing frost. If the rain is particularly heavy, its effectiveness may decrease, and the impact may not be as noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding electric heating wires to the rearview mirror. These wires consume a significant amount of electricity. When using the rearview mirror heating function, ensure the car is in a running state. Avoid activating the function while the car is stationary to prevent draining the car battery, which could lead to insufficient power for starting the vehicle. Other methods for defogging rearview mirrors include: Opening windows for air convection: Crack open the windows on both sides to allow air to flow between the inside and outside of the car, reducing the temperature difference and causing the fog to gradually disappear. Adjusting the car's air conditioning to the appropriate setting can also use the hot air blown by the air conditioning to defog the mirrors.

14

5

Share

What is the difference between China 5 and China 6?

The differences between China 5 and China 6 emission standards are as follows: Different emission standards: China 6 emission standards are more than 30% stricter than China 5. Excluding the influence of driving conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The China 5 standard was implemented nationwide on January 1, 2017, as the fifth stage of national motor vehicle emission standards. China 6 was implemented starting from July 1, 2019. Different principles: During the China 5 stage, diesel and gasoline vehicles had different emission standards, but China 6 adopts a fuel-neutral principle, meaning that regardless of the fuel type, the emission limits are the same. Different issuing departments: The China 5 standard was issued by the Ministry of Environmental Protection, while the China 6 standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China 5 is represented by 'V,' and China 6 is represented by 'VI.' Different monitoring requirements for plug-in hybrid electric vehicles: Compared to China 5, China 6 has improved monitoring requirements for plug-in hybrid electric vehicles, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulations. China 5 standard limits are as follows: Gasoline vehicles must not emit more than 1,000 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM fine particles per kilometer driven. China 6 has two standards: China 6a and China 6b. They are as follows: China 6a standard limits: Gasoline vehicles must not emit more than 700 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM fine particles per kilometer driven. China 6b standard limits: Gasoline vehicles must not emit more than 500 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 mg of PM fine particles per kilometer driven. Affected by the China 6 emission policy, although China 5 vehicles are not currently restricted from normal use, such as road restrictions or license plate limitations, their resale value will be significantly impacted. For truck owners, if they purchase a truck on loan for freight transport, the depreciation of the vehicle after paying off the loan is equivalent to the net profit earned during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China 6 vehicles, which have a longer service life and more road rights, offer greater advantages.

2

5

Share

What is the fuel consumption per 100 kilometers for the BMW 530?

How to Change the Transmission Oil for Magotan?

What is the appropriate speed for a novice driver on the highway for the first time?

Are There Fake Great Wall Antifreeze Products?

What to Prepare for the First Maintenance?

Where is the rearview mirror heating button on the Lynk & Co 03?

What is the difference between China 5 and China 6?

How to Remove the Spare Tire of a Corolla?

Where to Check the Results of Subject Two and Subject Three?

What are the causes of poor engine ignition?

Is the MG 6 Transmission Dry or Wet?