···
Log in / Register

What is the fuel consumption per 100 kilometers for a 4.0L displacement car?

1 Answers
VonJayce
07/29/25 7:18pm
4.0L displacement cars typically consume around 13 liters of fuel per 100 kilometers. Here are the specific factors that affect fuel consumption: Vehicle condition: In addition to regular cleaning, it's important to pay attention to the car's overall state, perform routine maintenance, and address repairs promptly. Driving habits: Poor driving habits can waste fuel without notice, such as carrying unnecessary weight, driving at high speeds with windows open, and aggressive acceleration or braking, all of which can increase fuel consumption. Road conditions: Driving in urban areas can increase fuel consumption by 20% compared to test tracks, mainly due to frequent starts and stops, waiting at traffic lights, and gear shifting for acceleration and deceleration.
Was this review help?
15
2
Share
More Forum Discussions

How to Open the Hood of a Passat?

Locate the hood release lever on the left side of the driver's footwell. The method of opening may vary depending on the model year. Feel for the mechanism underneath. Typically, there is a metal latch—press it and gently lift the hood to release. Finally, find the support rod to prop up the raised hood securely.
13
1
Share

How to Turn on the Ambient Lights in a Mercedes-Benz GLC?

Simply rotate the knob at the top of the light control lever to switch between different lighting modes. However, this operation needs to be performed with the ignition on. To turn on the high beams, first rotate the light knob to the low beam position, then push the light control lever forward to activate the high beams. Press the fog light switch next to the light knob to turn on the fog lights. The automatic headlights can be activated through the central control settings.
19
2
Share

Can Rearview Mirrors Be Repainted?

Rearview mirrors can be repainted. Carefully inspect the damaged area; if the damage exceeds one-third of the component, an over-repair method should be used for restoration. Waxing: Waxing is divided into direct waxing and polishing waxing. Direct waxing involves cleaning the car body and applying wax directly to the clear coat on the surface of the paint. Polishing waxing, on the other hand, requires using a polishing machine to polish the paint surface before applying wax. This method can instantly make the car look shiny. Glazing: Due to the composition of the glaze, it is not resistant to acid and alkali cleaning and can be easily damaged. It typically lasts only 1-3 months, and glazing can harm the car paint, requiring reapplication every two to three months. Crystal Coating: Crystal coating is a hard protective layer specifically designed for the care of key areas such as the car's paint surface, seats, interior and exterior trim, glass, and tires. It comes in quick-drying and slow-drying types, mainly determined by the primary ingredients. Film Application: Car coating is a highly protective measure that can brighten the paint surface while also providing multiple effects such as resistance to acids and alkalis, high temperature resistance, strong waterproofing, oxidation resistance, and UV protection.
12
0
Share

How to Perform a Walk-Around Vehicle Inspection as a Driver?

During the walk-around inspection, the trainee must visibly check the vehicle's exterior and confirm safety before opening the door. The inspection of all four tires should be clearly visible. Check whether all vehicle doors are properly closed. Check for any unsafe factors in the surroundings that may affect the vehicle's start. Also, pay attention to the traffic conditions in front of and behind the vehicle. Observe the rear traffic again before opening the door.
5
0
Share

How to Handle a Vehicle's First Traffic Violation?

If the local traffic management system is connected online, there will generally be a traffic violation processing window where you can handle the violation. You can send the originals or copies of your ID card, driver's license, vehicle registration certificate, and violation notice to a friend to handle on your behalf. If the violation only incurs a fine without points deduction, you can pay the fine through the post office. You can first complete real-name authentication with the relevant department, then handle the violation online.
10
5
Share

What is the installation method for snake buckle seat covers?

Before installing the car seat covers, please check the quality of the seat covers, the sturdiness of the stitching, and whether the length is appropriate. For the front driver's seat cover, place the seat cover downward, then manually insert the seat cover buckles into the gaps of the seat. Before installation, observe the installation method of the rear long seat. After installing the long seat, ensure the seat belt is properly reset.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.