What is the fuel consumption per 100 kilometers for a 2.0t engine?

What does it mean when the Lexus BSM light is on?

Lexus BSM light alerts the driver. Here is an introduction to BSM: 1. BSM stands for Blind Spot Monitoring, an auxiliary function for lane changing. During driving, it helps avoid collisions caused by not seeing vehicles approaching from behind when changing lanes. 2. BSM has two sensors located on the left and right rear fenders of the vehicle. While driving, they emit specific radar waves to monitor approaching vehicles from behind, thereby illuminating the BSM warning lights on the left and right mirrors to alert the driver. 3. BSM is similar to a parking radar and is a type of parking radar. It is located on both sides of the car and is responsible for monitoring and warning about blind spots in the A-pillar area, also known as blind spot monitoring and warning.

17

1

Share

How to Check Tire Pressure on Buick Verano?

Buick Verano is equipped with an active tire pressure monitoring system, allowing you to view specific tire pressure values on the instrument panel during normal use. Below are detailed specifications about the Verano: 1. Shanghai Buick General Motors. 2. The Buick Verano family integrates General Motors' global resources, focusing on high-quality driving experiences and embodying the design concept of 'Elegant Dynamic Aesthetics.' 3. Verano emphasizes stylish dynamism and precise driving control, tailored for young people as an exclusive new-generation sports coupe. 4. The Verano's exterior design is significantly more attractive than the Volkswagen Lavida, appearing more upscale. The 2021 Buick Verano Pro. The upgraded model features minimal changes in exterior design compared to its predecessor, with a silver paint finish that exudes a sense of sophistication and modernity.

19

5

Share

What are the reasons for BMW car body shaking during startup?

There are three main reasons for BMW car body shaking during startup. Below is a detailed introduction to these three reasons: 1. Severe carbon deposits: This may be due to a dirty throttle valve or excessive carbon deposits in the fuel injector and intake manifold. In cold conditions, carbon deposits can absorb some fuel, leading to incomplete combustion, which results in unstable idling and difficulty starting. The throttle valve or fuel system should be cleaned promptly. 2. Ignition system failure: When the ignition system is not working properly or the spark plug firing condition is poor, it can easily lead to such faults. Check if the spark plugs have excessive carbon deposits and replace them if necessary. 3. Unstable oil pressure: If you have already cleaned the engine carbon deposits, cleaned the throttle valve, replaced the oil pad and spark plugs, but still notice body shaking during idling, you should check whether the fuel supply pressure and intake pressure sensor are normal. When the fuel pump supply pressure is abnormal or the intake pressure sensor value is incorrect, it can easily cause body shaking.

8

3

Share

What Are the Reasons Why the Car Remote Control Doesn't Work?

There are many reasons why a car remote control may not work: 1. The battery is dead or has poor contact; 2. The time control module in the remote control malfunctions, which can also cause the remote to stop working; 3. The antenna of the remote transmitter in the car has aged, etc. Here is some relevant information: 1. If the car remote control does not work, and it still doesn't function after replacing the battery, you can take it to a repair station for inspection and repair. Some cars may experience unresponsive remote door locks when the front windshield is covered with anti-explosion sun film, especially when trying to unlock the car from the front. This happens because the anti-explosion sun film can partially block the remote signal. 2. When using the car remote control, avoid contact with strong magnetic fields, such as high-voltage power lines, transmission towers, or other places with strong magnetic signals. It is best to avoid parking the vehicle in such areas. Since smart keys use low-intensity radio waves, they may not function properly under magnetic interference.

9

3

Share

Where is the tire pressure reset button for the 2020 Sagitar?

20 Sagitar tire pressure reset light is located in the glove compartment on the passenger side, towards the left, where you can find the tire pressure reset button. Turn the ignition key and hold the tire pressure button until you hear a beep sound, and the tire pressure light on the dashboard goes off, indicating a successful reset. Here are some additional information: The tire pressure indicator light may come on for the following reasons: 1. The tire pressure monitoring light is on due to a punctured tire. 2. The tire pressure monitoring light is on due to excessive tire pressure. 3. The tire pressure monitoring light is on due to prolonged driving with low tire pressure. 4. The tire pressure monitoring light is on due to low tire pressure from not inflating for a long time.

20

5

Share

What to Do When the Buick Envision's Center Console Lights Stay On After Turning Off the Engine?

Solutions for the Buick Envision's center console lights staying on after turning off the engine are as follows: 1. Press the button to manually turn off the center console. 2. If you exit the vehicle through a door other than the driver's door after turning off the engine and then lock the car, this issue may occur. The correct method is to exit through the driver's door and lock the car after turning off the engine, and the center console will automatically turn off. 3. If there is an issue with the center console relay or wiring, causing continuous power supply after turning off the engine, the display screen will remain lit. To determine if the center console relay is faulty, you can purchase a new relay for replacement. If the center console returns to normal after replacement, it indicates a problem with the relay. Note that there may be more than one relay inside the center console box, so car owners cannot replace it themselves. It is necessary to drive to a service station for inspection and repair.

12

5

Share

What is the fuel consumption per 100 kilometers for a 2.0t engine?

What does it mean when the Lexus BSM light is on?

How to Check Tire Pressure on Buick Verano?

What are the reasons for BMW car body shaking during startup?

What Are the Reasons Why the Car Remote Control Doesn't Work?

Where is the tire pressure reset button for the 2020 Sagitar?

What to Do When the Buick Envision's Center Console Lights Stay On After Turning Off the Engine?

How to Remove the Steering Gear of the Cavalier?

How to Repair a Car Window That Won't Roll Up or Down?

Why is the fuel gauge not displaying after replacing the instrument panel?

Is the sequence of changing brake fluid from near to far?