What is the fuel consumption of Toyota Corolla?

Where is the keyhole of the Buick GL8?

The door keyhole of the Buick GL8 is located above the left front door handle, and the ignition keyhole is positioned below the right side of the steering wheel. The Buick GL8 is equipped with keyless entry and a push-button start system, so the keyhole is rarely used in daily situations. It is typically utilized when the remote key fob is out of battery or malfunctions, requiring the insertion of a mechanical key into the keyhole to unlock the door or start the vehicle. The Buick GL8 is positioned as a mid-to-large-sized MPV, with body dimensions of 5219mm in length, 1878mm in width, and 1799mm in height, and a wheelbase of 3088mm. It features a MacPherson strut front suspension and a multi-link independent rear suspension. In terms of power, the Buick GL8 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 237Ps and a maximum power output of 174kW at 5000rpm. It produces a maximum torque of 350Nm within the range of 1500-4000rpm, utilizing direct fuel injection technology, and is paired with a 9-speed automatic transmission. For safety and convenience, the vehicle comes with a range of features including driver/passenger airbags, front/rear side airbags, front/rear curtain airbags, tire pressure monitoring, lane departure warning, lane keeping assist, road traffic sign recognition, and an active braking/active safety system.

19

5

Share

What is the reason for the sudden illumination of the car's rpmx1000 light?

When the car's rpmx1000 light suddenly illuminates, it indicates the engine's operating status as shown on the tachometer. rpmx1000 represents the basic engine speed of the vehicle. Multiplying the number displayed on the dashboard by this basic unit gives the current engine speed in revolutions per minute (RPM). On the speedometer, a reading of 1 corresponds to 1000 RPM, 2 to 2000 RPM, and 3 to 3000 RPM. RPM stands for revolutions per minute, and engines with higher RPMs generally deliver more power and greater torque. The engine operates by burning a mixture of air and gasoline to drive the pistons, which in turn rotate the crankshaft and transfer power to the vehicle. This force converted into crankshaft rotation is known as torque. Higher RPM values result in greater fuel consumption and increased air demand, as the throttle is directly linked to the RPM value. For manual transmission vehicles, RPM serves as a crucial standard for gear shifting.

1

3

Share

How to Check the Tianjin Car Lottery Results?

Tianjin car lottery results can be checked by the following methods: 1. Search for "Tianjin Local Treasure" and click to enter the official account page; 2. Click on the WeChat query at the bottom left; 3. In the expanded options, you can see the car plate lottery results and click on it; 4. Send your name and car plate lottery to query. The application process for the Tianjin car lottery is as follows: 1. Log in to the Tianjin Passenger Vehicle Regulation Management Information System website; 2. Select "Individual Login" and log in with your mobile phone number and password to enter the personal user center interface; 3. In the personal user center interface, select the appropriate identity type, confirm the information is correct, and click on the incremental application to enter the information filling interface; 4. On the information filling interface, carefully read all prompts, fill in the corresponding information truthfully, and after confirming the information is correct, click next to enter the "Information Confirmation Page". After clicking OK in the pop-up prompt box, you will enter the SMS confirmation interface; 5. Enter the correct mobile phone number, obtain and enter the SMS verification code, click to get the sequence code, enter the password, and after clicking submit, the system will prompt "Application Successful", indicating that the data has been submitted to the system backend.

2

Share

Are Red Light Violations Always Captured from Behind?

Red light violations are determined by capturing three photos through electronic cameras from behind. The first photo shows the vehicle crossing the intersection stop line, including the red light and license plate number. The second photo captures the vehicle completely passing the stop line, also showing the red light and license plate number. The third photo demonstrates the vehicle continuing to move, mainly by comparing the vehicle's position changes from the second photo, again including the red light and license plate number. Capturing these three photos confirms a red light violation. According to Article 26 of the Road Traffic Safety Law: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. Article 44 states: Motor vehicles passing through intersections must comply with traffic signals, signs, markings, or the directions of traffic police. Here are some tips to avoid red light violations: Check arrow lights first, then circular lights: Currently, there are two types of traffic lights: arrow lights and circular lights. When arrow lights are present, drivers should first observe the arrow lights and then the circular lights to avoid running red lights. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow is red, right turns are prohibited; otherwise, it will be penalized as a red light violation. Brake promptly: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, resulting in a red light violation. If the front wheels have just crossed the stop line when the light turns red, do not proceed; wait for the green light. Monitor green light countdown: When the green light flashes, if there is a countdown, use it to judge. If there is no countdown and the vehicle is close to the intersection at high speed, proceed to avoid braking too late. If the speed is slow and the vehicle is far from the intersection, brake immediately to stop. Article 38 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China states: When the green light is on, vehicles are permitted to pass, but turning vehicles must not hinder straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from passing. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians should follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not hinder passing vehicles or pedestrians. Red light violations are not penalized under the following circumstances: Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights, resulting in blurred evidence, no penalty is given for accidental violations. Emergencies: When transporting emergency patients to the hospital, multiple red lights may be run. After delivery, provide hospital or patient proof to traffic police for verification, and the violations will be cleared. If possible, call an ambulance to avoid accidents. Traffic police direction: During peak hours, traffic police may direct traffic at key intersections. Drivers should follow their gestures. Yielding to emergency vehicles: When yielding to ambulances or fire trucks, violations captured by cameras will not be recorded. If recorded, apply for reconsideration at the traffic police department. Traffic police clarify that under Article 38 of the Regulations, vehicles that have crossed the stop line when the yellow light flashes may continue. However, if drivers accelerate through a yellow light, it will be considered a red light violation if captured.

14

4

Share

Which Pedal is the Clutch, Brake, and Accelerator in a Car?

In a manual transmission car, the three pedals from left to right are the clutch pedal, brake pedal, and accelerator pedal. In an automatic transmission car, the left pedal is the brake pedal, and the right pedal is the accelerator pedal, with no clutch pedal. Manufacturers designed this layout based on ergonomics to ensure drivers can react quickly in emergencies. Note: These two pedals should only be controlled with the right foot; never use the left foot to control one pedal. Precautions for controlling the accelerator: When pressing or releasing the accelerator pedal, apply force gently and smoothly, ensuring a light touch and gradual movement. Select the appropriate gear to keep the engine running at medium speed and with a larger throttle opening most of the time, which helps save fuel. Releasing the clutch should be closely coordinated with pressing the accelerator, and the action should be swift. Before stopping the car or turning off the engine, first release the accelerator pedal and avoid revving the engine abruptly. Braking precautions: Press the brake pedal gradually, avoiding sudden braking, as this may cause the car to nod forward. Brake early, maintaining a safe distance from the car ahead, and anticipate road conditions to brake in advance. For long downhill braking, use the automatic parking system for assistance to prevent overheating of the brake pads. When braking during a turn, slow down by pressing the brake before entering the turn, then coast into the turn and accelerate out of it. On rainy days or gravel roads, use intermittent braking (pump the brakes) to prevent the car from skidding. Tips for new drivers: Check the tires before driving: Since tires are the only part of the car in contact with the road, poor tire condition can lead to blowouts at high speeds, endangering both the vehicle and personal safety. Drive at a steady speed as much as possible. Avoid sudden deceleration or acceleration, allowing sufficient adjustment time for cars ahead and behind, and fully consider their reactions. Always give a signal when overtaking. Whether by flashing high and low beams or honking, depending on road conditions, always alert the car ahead that you intend to overtake. Do not follow too closely, as sudden braking by the car ahead in an emergency can easily lead to danger. Do not use your phone while driving. If you miss an exit on the highway, never reverse or stop.

7

0

Share

What Procedures and Documents Are Required for Second-hand Car Transfer?

For the transfer of a second-hand car, the following documents need to be prepared: the original and photocopy of the seller's ID card, the original and photocopy of the buyer's ID card, the original and photocopy of the vehicle's original purchase invoice or the last transfer invoice, the original and photocopy of the vehicle's driving license, etc. The procedure for second-hand car transfer: Before the transfer, any modifications made to the vehicle must be restored to match the photo on the driving license. Otherwise, the transfer cannot proceed. Next, go to the second-hand car transfer hall to issue the invoice and check if the vehicle has any outstanding traffic violations. These violations should be handled first. The data for traffic violation handling usually updates within about an hour. Remove the vehicle's license plate; generally, the transfer hall has tools, and staff can assist with taking photos. Collect the external inspection form, drive the vehicle to the external inspection channel, and wait for the police to complete the external inspection. After passing, take the external inspection form back to the second-hand car transfer hall. Precautions for second-hand car transfer: The old motor vehicle market implements an agency system for vehicle transfers. The transfer window does not directly handle transactions for consumers. If a transfer is needed, the vehicle must be brought to the market, and an old motor vehicle operating company must be engaged to complete the transfer procedures on behalf of the owner: evaluation, vehicle inspection, and invoice issuance. Additionally, during the vehicle transfer, both the buyer and the seller must sign the "Old Motor Vehicle Sales Contract" supervised by the industrial and commercial department. The contract is made in triplicate, with one copy for each party and one retained by the industrial and commercial department. The vehicle transfer or relocation procedures can only be processed after the contract is filed with the industrial and commercial department. Once the evaluation report is ready, the transfer procedures can begin.

8

4

Share

What is the fuel consumption of Toyota Corolla?

Where is the keyhole of the Buick GL8?

What is the reason for the sudden illumination of the car's rpmx1000 light?

How to Check the Tianjin Car Lottery Results?

Are Red Light Violations Always Captured from Behind?

Which Pedal is the Clutch, Brake, and Accelerator in a Car?

What Procedures and Documents Are Required for Second-hand Car Transfer?

Does the Patrol have a diesel version?

Can I Apply for the Inspection Exemption Label Online for Exempted Vehicles?

How to Use Toyota RAV4 Cruise Control?

What documents are required for annual inspection?