What is the fuel consumption of the Zotye T600 1.5t?

1 Answers
CassidyRose
07/25/25 2:16pm
Zotye T600 1.5t has a fuel consumption of 9.3 liters per 100 kilometers. The following factors affect fuel consumption: 1. Road conditions: Generally, flat roads save more fuel than bumpy roads, straight roads save more fuel than winding roads, and smooth roads save more fuel than congested roads. 2. Weather: In hot summer weather, air conditioning cooling consumes some fuel. In winter, low temperatures prevent gasoline from reaching the optimal combustion temperature, leading to incomplete combustion and increased fuel consumption. 3. Tire pressure: Low tire pressure increases fuel consumption. 4. Engine: Dirt and grease on the engine surface can affect engine cooling, leading to higher fuel consumption. 5. Carbon deposits in the transmission: Carbon deposits in the transmission reduce engine power, which to some extent accompanies an increase in fuel consumption, as achieving the same power as before the carbon deposits requires increasing throttle opening and corresponding fuel supply.
Was this review help?
12
4
Share
More Forum Discussions

How to Resolve Changan Keyless System Malfunction?

Place the remote key near the vehicle's internal sensor to start the vehicle. The sensor location varies by model, so refer to the user manual for details. The key battery might have poor contact. You can remove the key casing, rotate the coin battery, or take it out and reinstall it after a while. Check for any electromagnetic interference or signal interference sources nearby. Some dash cams without proper electromagnetic shielding can also cause interference.
4
5
Share

How to reset the maintenance reminder on Changan Raeton?

There are two buttons on the dashboard, one for adjusting the trip mileage and one for adjusting the time. First, reset the trip mileage to zero, then press and hold the trip mileage button without releasing it. At the same time, turn off the ignition key and then turn it back on. Release the button, then press and hold both buttons simultaneously for 3 seconds before releasing to complete the process.
17
2
Share

What to Do When the Changan Eado Car Key is Locked Inside the Car?

Generally, when purchasing a car, you will receive one or two spare keys. If conditions permit, retrieving the spare key is the most convenient and cost-effective solution. You can also dial 114 to obtain the contact information of a professional locksmith company registered with the public security department. There are specialized car door unlocking services available. By providing the owner's ID card and proof of vehicle ownership, you can access professional unlocking services.
8
1
Share

How to Remove the Headrest of a Changan Car Seat?

First, unscrew the two plastic rings under the headrest, then use a thin screwdriver to pry open the headrest along the metal rod. After prying it open with force, you will see a small iron ring inside. Insert the screwdriver and gently pull outward while turning counterclockwise. At the same time, hold the headrest and lift it upward to find one side of the iron rod pried out. Repeat the same process for the other side. Then, the headrest can be removed.
18
4
Share

How to Open the Fuel Tank Cap of Changan Oushang?

With the vehicle unlocked, simply press the fuel tank cap by hand to open it. Note that the fuel tank cap must be opened when the car is unlocked. The fuel tank cap is controlled by a switch button inside the car. Press the fuel tank switch button directly to open it. The electronic button is located on the left front door panel or on the center console. Alternatively, use the key to unlock the fuel tank cap directly. Some cars have a press-type or flip-open cap; after opening the cap, use the mechanical key to unlock it.
20
4
Share

How to Replace the Front Bumper of Changan Oushang X5?

Pry open the clips on the grille, then hold the left and right sides of the front grille with your hands and gently pull outward to separate the front grille from the front bumper. Remove the upper, lower, left, and right screws of the front bumper. Use a flathead screwdriver to pry open the clips securing the left and right sides of the front bumper. Hold the corners of the front bumper with your hands and gently pull outward to separate the front bumper from the vehicle body. Disconnect the wiring harness connectors for the fog lights on both sides.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.