What is the fuel consumption of the Zongshen RX3S?

1 Answers
LeEvangeline
07/28/25 8:08pm
The fuel consumption of the Zongshen RX3S is approximately 3.4L per 100 kilometers. The Zongshen RX3S is equipped with a 380cc asynchronous inline twin-cylinder SOHC water-cooled eight-valve engine, paired with a Delphi electronic fuel injection system. It delivers a maximum power of 27kW at 9000rpm and a peak torque of 35N.m at 6500rpm. Here are some additional details: 1. Appearance: The Zongshen RX3S adopts a design style inspired by BMW adventure bikes, featuring a beak-like front and BMW-style dual headlights. The build quality is excellent, meeting upper-tier standards among domestic models, with great attention to detail. 2. Engine: The RX3S performs exceptionally well off-road. It is powered by a twin-cylinder water-cooled electronic fuel injection engine with a displacement of 380cc, offering strong performance. The engine produces a maximum power of 27kW and a maximum torque of 35Nm, with a compression ratio of 10:1. The fuel consumption is approximately 3.4L per 100 kilometers, and the fuel tank capacity is 19.8L.
Was this review help?
5
5
Share
More Forum Discussions

What does full-speed adaptive cruise control mean?

Full-speed adaptive cruise control provides adaptive cruise functionality across the entire speed range, which can be considered as a functional branch of adaptive cruise control. Both systems are developed from conventional cruise control. Full-speed adaptive cruise allows the vehicle to activate while stationary and maintain safe following distance, including following the preceding vehicle to a complete stop and restarting. While the term 'full-speed range' suggests a broad application spectrum, it doesn't actually cover from 0 to the vehicle's maximum speed, but rather operates within a range of 0 to 150 km/h. Unlike standard adaptive cruise control systems, full-speed adaptive cruise typically becomes active when the vehicle speed exceeds 25 km/h. When speed drops below 25 km/h, the system requires manual driver intervention.
19
3
Share

How to Resolve the AdBlue Warning Light?

AdBlue is a diesel exhaust fluid, also known as automotive environmental urea. When the AdBlue warning light appears on the instrument cluster, it is necessary to check and replenish the urea. Some vehicles may fail to start after running out of urea. Once the warning light comes on, urea should be added immediately. For most vehicles, the light will turn off after driving a certain distance following the urea replenishment. Adding urea to diesel vehicles is aimed at reducing exhaust emissions and protecting the atmospheric environment. The use of urea in vehicles helps convert harmful nitrogen oxides in the exhaust into nitrogen and water. Diesel vehicles equipped with a urea system require a urea tank to store the urea liquid. The ECU calculates the theoretical amount of nitrogen oxides generated based on engine speed, fuel injection volume, and other data. It then determines the required amount of ammonia to treat these nitrogen oxides based on the chemical reaction ratio, subsequently calculating the necessary urea injection volume. The system then controls the injection system to spray urea into the high-temperature exhaust gases at the exhaust end to eliminate nitrogen oxides.
15
2
Share

What is the normal operating temperature for a car's coolant?

The normal operating temperature for a car's coolant ranges between 90°C and 95°C. For most family cars, the normal operating temperature is around 95°C, while some high-performance vehicles or cars with higher thermal efficiency may operate at approximately 110°C. BMW, for example, produces vehicles whose engines can exceed 110°C under normal operating conditions. Excessively high oil temperatures can cause the oil to thin, leading to oil film breakdown and resulting in engine wear. Conversely, if the oil temperature is too low, the oil becomes too viscous, preventing proper lubrication of critical components. Therefore, maintaining the correct oil temperature is crucial. To avoid oil film breakdown and abnormal engine wear, it's advisable to refrain from prolonged high-speed driving. Engine oil also plays a role in cooling; insufficient oil levels can cause the engine to overheat, potentially leading to cylinder scoring. It's recommended to replace the vehicle's coolant every two years. If the coolant level is low, never substitute it with water. Water contains impurities that can form scale deposits at high temperatures, potentially clogging the engine's water passages and cooling system pipes.
16
3
Share

How to Start the Car When the Key Fob for Push-Button Start Runs Out of Battery?

When the key fob for push-button start runs out of battery, here are the methods to start the car: 1. Vehicles with push-button start usually have a designated slot for the smart key. Insert the key fob into this slot, wait a moment, and the car will detect the key, allowing you to start the engine. 2. Locate the mechanical keyhole and insert the physical key blade from the remote key fob, then start the car as you would with a traditional key. 3. Place the remote key fob directly against the push-button start, wait briefly, and the car will sense the key, enabling you to start the vehicle. 4. Replace the battery directly. The push-button start system is a part of smart car technology, simplifying the ignition process with a single button that can also turn off the engine. This system can be installed either in place of the original key cylinder or as a standalone panel modification.
9
4
Share

Which city does the license plate Ji F belong to?

Ji F license plate belongs to Baishan City in Jilin Province. The license plate codes for various regions in Jilin are: Ji A for Changchun City, Ji B for Jilin City, Ji C for Siping City, Ji D for Liaoyuan City, Ji E for Tonghua City, Ji F for Baishan City, Ji H for Yanbian Korean Autonomous Prefecture, Ji J for Songyuan City, Ji K for Changbai Mountain. The current civilian license plates are the 92-style, which have been used nationwide since July 1994. The first character of the license plate is a Chinese character representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the province, municipality, or autonomous region. The second character is an English letter, representing the prefecture-level administrative region where the vehicle is registered, generally the letter code for the prefecture-level city, region, autonomous prefecture, or league.
16
1
Share

What does plug-in hybrid mean?

Plug-in hybrid, abbreviated as PHV, refers to a type of vehicle that falls between an electric vehicle and a fuel-powered vehicle. It has both the engine, transmission, drivetrain, fuel system, and fuel tank of a traditional car, as well as the battery, motor, and control circuit of an electric vehicle. Moreover, the battery capacity is relatively large and comes with a charging port. Plug-in hybrid models effectively address the range limitations of pure electric vehicles. Plug-in hybrids combine the advantages of pure electric vehicles (EVs) and hybrid electric vehicles (HEVs), enabling both pure electric, zero-emission driving and extending the vehicle's range through hybrid mode.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.