What is the fuel consumption of the Yixuan GS Black Warrior?

1 Answers
Camila
07/29/25 7:36pm
The comprehensive fuel consumption of the Yixuan GS Black Warrior is 5.8-6.7L/100km. The 2021 Yixuan GS Black Warrior currently has 9 models on sale: the 200T manual Zhui Xing version and 200T manual Zhui Feng version, with a comprehensive fuel consumption of 5.8L/100km; the 230T automatic Zhui Xing version, 230T automatic Zhui Guang version, 230T automatic Zhui Xing Warrior version, 230T automatic Zhui Yue version, 230T automatic Zhui Feng version, 230T automatic Zhui Yue Warrior version, and 230T automatic Zhui Yao Warrior version, with a comprehensive fuel consumption of 6.7L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.0-9.1L/100km. Specific factors affecting car fuel consumption are as follows: Car weight: Larger and heavier cars consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load), while an SUV model weighing about 1.5 tons has a fuel consumption of 8.5 liters. Different weights result in different fuel consumption. Air resistance: Higher air resistance increases fuel consumption during driving. Cars with better aerodynamics have lower air resistance, leading to lower fuel consumption. Economical RPM: During driving, the engine has a most economical torque output point. Maintaining the car's speed within this torque output point significantly reduces fuel consumption. Generally, small-displacement cars have an economical RPM at about 70 km/h, while large-displacement cars have it at about 100 km/h. Keeping within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption.
Was this review help?
1
0
Share
More Forum Discussions

How to Turn Off the Cruise Control Indicator?

The method to turn off the cruise control indicator is: 1. Gently press the brake pedal, and the cruise control indicator light on the dashboard will change from green to white; 2. Remove your foot from the brake pedal, and the vehicle will enter a coasting state with gears engaged, gradually decreasing speed; 3. When the driver presses the brake pedal, the cruise control will automatically deactivate. The cruise control system, abbreviated as CCS, is also known as the cruise control driving device, speed control system, or autonomous driving system. Its function is to maintain the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a constant speed. With this system, drivers no longer need to control the accelerator pedal during long highway drives, reducing fatigue and unnecessary speed fluctuations, which helps save fuel.
8
4
Share

How to Turn Off Daytime Running Lights?

The method to turn off daytime running lights is: 1. Insert the car key and turn it to the position where only the radio can be heard. Pull the switch on the left side of the combination switch toward the driver's direction while also pulling it downward, and hold it without releasing; 2. Turn on the car key, and after about 3 seconds, you will hear a beep, indicating that the operation was successful. The functions of daytime running lights are: 1. To enhance the visibility of the vehicle; 2. To reduce vehicle accidents and lower the probability of fatal crashes. Precautions for installing daytime running lights include: 1. When choosing the installation location, try to avoid high-temperature areas and places prone to water accumulation; 2. During wiring installation, ensure that the direction of the wiring harness interface and the daytime running light interface is not incorrectly connected.
15
3
Share

How to Cancel the Volkswagen Tire Pressure Monitoring Light?

Methods to cancel the Volkswagen tire pressure monitoring light: 1. Operate the buttons on the multifunction steering wheel, and use the "Tire Pressure" option in the multifunction menu to save the tire pressure status; 2. There is a tire pressure reset switch on the side of the gear lever. With the ignition switch turned on, press and hold this switch button until you hear a beep, indicating the reset is complete. Tire pressure refers to the pressure of the air inside the tires. In car maintenance, the engine is the heart of the car, and damage to the engine will lead to the end of the car's life. Tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the performance and power of the car.
5
1
Share

What kind of engine oil should be used for the Mazda 3 Axela?

The Mazda 3 Axela should use 5W30 engine oil. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. The Mazda 3 Axela is a compact 4-door, 5-seater sedan with the following dimensions: length 4662mm, width 1797mm, height 1445mm, and a wheelbase of 2726mm. It has a fuel tank capacity of 50 liters. The Mazda 3 Axela is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 86 kW and a maximum torque of 148 Nm. It features front-wheel drive, with a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
9
3
Share

What are the types of final drives?

There are several types of final drives: 1. Two-stage reduction gear: It features an additional intermediate gear. The left side of the driving bevel gear meshes with the bevel gear portion of the intermediate gear, while a small-diameter spur gear on the same shaft as the bevel gear meshes with the driven gear. 2. Single-stage reduction gear: It consists of a driving bevel gear and a driven bevel gear. The driving bevel gear connects to the drive shaft and rotates clockwise, with the driven bevel gear positioned to its right. The meshing point rotates downward, aligning with the forward direction of the wheels. The function of the final drive is to further reduce the speed of the power output from the transmission to increase torque, before transferring the power to the differential.
5
1
Share

How to Properly Start and Shut Down a Push-to-Start Car?

The correct methods to start and shut down a push-to-start car are as follows: 1. Starting: Press the button twice without stepping on any pedals. The vehicle will enter the self-check process. Observe the dashboard indicator lights turning on one by one until they all go off, indicating the vehicle has completed all self-check procedures. Then, press the button again while stepping on the brake, and the vehicle will start normally. 2. Shutting down: Step on the brake to bring the vehicle to a complete stop. Shift the gear from D (Drive) to N (Neutral); engage the handbrake (for electronic handbrakes, pull it upward); continue holding the brake, shift the gear from N to P (Park); release the brake, press the push-to-start button, and the power will turn off, completing the shutdown process.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.