What is the fuel consumption of the Yamaha JOG i125?

2 Answers
DelAiden
08/31/25 6:45am
Yamaha JOG i125 has a fuel consumption of 2.2L/100km. Below are the specific details of the Yamaha JOG i125: 1. Dimensions: The Yamaha JOG i125 is a scooter produced by Yamaha. It measures 1805*685*1050mm in length, width, and height, with a seat height of 740mm, a wheelbase of 1275mm, and a minimum ground clearance of 115mm. 2. Engine specifications: The Yamaha JOG i125 is equipped with a single-cylinder, air-cooled, four-stroke engine with a displacement of 125ml. It delivers a maximum power of 6.1kw and a maximum torque of 9.7N·m, with a compression ratio of 11.0:1. It is paired with a V-belt continuously variable transmission (CVT).
Was this review help?
7
4
Share
ValentinaAnn
09/13/25 3:08am
I've been commuting with my Yamaha Cygnus i125 for almost two years, and its fuel consumption has consistently satisfied me. For city commuting, it averages around 1.8 liters per 100 kilometers, dropping to about 1.6 on highways. Fuel consumption is slightly higher in hot weather due to increased air conditioning and fan usage, while winter conditions prove more favorable. My riding habits are quite steady, with minimal sudden acceleration, keeping consumption within the 1.7-2.0 liter range. Maintaining correct tire pressure is also crucial, as underinflation can increase fuel consumption by 10%; I check it monthly. Regular maintenance, including oil and filter changes, ensures the engine runs efficiently. Overall, this motorcycle is both fuel-efficient and practical, costing less than 100 yuan per month in fuel, significantly saving compared to a car.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

Where is the vehicle production date located?

Vehicle production date can be found on the nameplate beneath the front windshield and in the engine compartment. The 10th digit of the VIN (Vehicle Identification Number) indicates the production year. Each vehicle has a unique VIN, where the 10th digit '5' represents production year 2005, 'A' indicates 2010, 'B' means 2011, and so on. The nameplate displays fundamental vehicle specifications including manufacturer, model, engine power, gross weight, load capacity, passenger capacity, serial number, production date, and manufacturer name. While paper nameplates show exact production dates (year/month/day), metal nameplates only display year/month and cannot be used as official production dates.
17
2
Share

What to Do When Car Rearview Mirrors Are Blurry in Rainy Weather?

Solutions for blurry car rearview mirrors in rainy weather include: 1. Installing rain deflectors; 2. Cleaning the rearview mirrors with soap before it rains; 3. Utilizing the rearview mirror heating function, if available, to eliminate fog and rain on the mirrors. Car rearview mirrors are located on both sides at the front of the vehicle and inside the car's front area, designed to reflect conditions behind, beside, and below the vehicle, enabling the driver to clearly see these areas and expand their field of vision. The operation method for the car rearview mirror switch is: 1. Move the mirror adjustment button to the 'L' position and rotate left or right to adjust the left rearview mirror; 2. Move the button to the 'R' position to adjust the right rearview mirror; 3. Move the button to the '0' position to turn off the adjustment function.
19
3
Share

How many points are deducted for signaling for less than 3 seconds?

According to the scoring criteria for Subject 3: Starting, turning, changing lanes, overtaking, or parking without signaling for at least 3 seconds will result in an immediate deduction of 10 points. Therefore, if the interval between two turn signals during the Subject 3 test is less than 3 seconds, a total of 20 points should be deducted. Introduction to Subject 3: Subject 3, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license examination. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed for. New regulations for Subject 3: Starting from June 1, 2021, the interval for scheduling the Subject 3 test has been adjusted from 30 days after passing Subject 1 to 20 days. For those applying for additional licenses for large and medium-sized passenger and cargo vehicles, the interval for scheduling the Subject 3 test has been adjusted from 40 days after passing Subject 1 to 30 days.
14
1
Share

What is a 6-speed Tiptronic transmission?

6-speed Tiptronic refers to a transmission that combines a six-speed manual mode with automatic shifting. Tiptronic means a vehicle has both manual and automatic gear-shifting functions. An automatic transmission includes the Tiptronic transmission, which is an automatic transmission capable of manual gear selection. The manual mode in Tiptronic differs from a pure manual transmission car—although it has a clutch mechanism in its structure, it doesn't require driver operation. A conventional automatic transmission has neutral gear, drive gear, hill climb first gear, hill climb second gear, and reverse gear. In addition to these, a Tiptronic transmission also features a driver-controlled gear increase/decrease function.
10
5
Share

Can a Manual-Automatic Transmission Be Switched While Driving?

Manual-automatic cars can switch from manual to automatic while driving. It is advisable to avoid sudden acceleration or deceleration during the switching moment, and try to maintain stable vehicle speed and engine RPM. Introduction to Manual-Automatic Transmission: Manual-automatic transmission combines manual shifting and automatic shifting in a car. Manual transmission allows drivers to freely adjust gears and RPM, providing a thrilling driving experience with a strong sense of sportiness and driving pleasure. Operating Principle of Manual-Automatic Transmission: Manual-automatic transmission is essentially a type of automatic transmission that simulates the operation of a manual transmission through an electronic control system. The introduction of manual-automatic transmission gives drivers greater operational freedom, allowing them to freely choose the appropriate gear and shifting timing, greatly enhancing the driving pleasure.
18
5
Share

Does Transmission Fluid Affect Vehicle Power?

Manual transmission fluid does not affect vehicle power. Automatic transmission fluid can affect vehicle power because dirty fluid can impact gear shifting, thus affecting power transmission. The functions of transmission fluid are as follows: Reduces friction, minimizes wear, controls clutch friction and synchronizer performance. Load-bearing (low-speed high torque, vibration loads), heat dissipation, reduces vibration and noise, removes contaminants from gear meshing (cleaning function). Prevents corrosion, pitting, and surface metal stripping, isolates metal surfaces to prevent direct metal-to-metal contact. The hazards of not changing transmission fluid for an extended period are as follows: Causes damage to the transmission's shift control mechanism; leads to abnormal wear of gears and clutch plates inside the transmission; affects normal transmission operation, resulting in damage to the transmission valve body.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.