What is the fuel consumption of the Yamaha Jog?

1 Answers
AngeloAnn
07/30/25 2:52am
The average fuel consumption of the Yamaha Jog is approximately 3L per 100 kilometers. If the driving speed is consistently maintained between 30-40 km/h, the fuel consumption can be reduced to between 2.1-2.5L. Below is the relevant introduction of this motorcycle: Body dimensions: The length, width, and height of this motorcycle are 1755mm × 640mm × 1025mm, with a seat height of 755mm. Power system: Equipped with a four-stroke air-cooled single-cylinder engine, with a total displacement of 102cc, a maximum power of 5.8KW, and a maximum torque of 6.4NM, using a V-belt continuously variable transmission.
Was this review help?
13
3
Share
More Forum Discussions

Differences Between Hatchbacks and Sedans

Differences between sedans and hatchbacks are as follows: 1. Different trunk sizes: Comparatively, the trunk of a sedan is larger than that of a hatchback. A sedan consists of three parts: the engine compartment, the passenger compartment, and the trunk compartment. If the trunk appears relatively small, then it is a hatchback. 2. Different properties: A sedan refers to a car whose body structure is composed of three separate, enclosed compartments with distinct purposes, while a hatchback refers to a car where the cabin and trunk are integrated into a single compartment. 3. Different structures: A sedan is divided into the front engine compartment, the middle passenger compartment, and the rear luggage compartment; a hatchback extends the passenger compartment backward at approximately the same height, combining the rear luggage compartment with the passenger compartment into one, reducing it to two "compartments"—the engine compartment and the passenger compartment—with no protruding rear luggage compartment.
17
5
Share

How to Handle a Tire Pressure Warning?

When a tire pressure warning appears and no visible damage is observed, you can simply inflate the tire to the normal pressure and reset the tire pressure system. If the tire is found to be punctured during inspection, drive to a tire shop promptly for a repair, then reinflate the tire. If the tire pressure warning reappears after inflation without any visible puncture, it might be due to air leakage caused by a deformed wheel rim; in this case, inspect the rim and consider replacing it. Tire pressure monitoring automatically checks the tire pressure in real-time while driving and alerts the driver to any leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to shrink, making it rotate faster than the other tires. By comparing the rotational speed differences among the tires, the system monitors the tire pressure. Indirect tire pressure monitoring relies on calculating the rolling radius to assess the pressure. Tire Pressure Monitoring System (TPMS) Overview: This system combines the advantages of both direct and indirect monitoring. It equips two diagonally opposite tires with direct sensors and uses a four-wheel indirect system. Compared to a full direct system, this hybrid approach reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a full direct system.
8
0
Share

How many kilowatt-hours of electricity are required to fully charge a BMW i3?

It takes 33 kilowatt-hours of electricity to fully charge a BMW i3. Below is relevant information about the BMW i3: 1. Overview: The BMW i3 utilizes an advanced electric drive system, which is very similar to the all-electric drive system of the BMW 1 Series Active-E, with a maximum output power of 167 horsepower, delivering power to the rear wheels. The vehicle relies on a set of lithium-ion batteries to provide power, offering a maximum range of 257 kilometers and a top speed of 160 kilometers per hour when fully charged. The battery pack also supports fast charging mode, allowing the battery to reach 80% charge in just one hour. 2. Features: Inside the vehicle, the design of the new BMW i3 closely resembles that of the MINI Clubman, emphasizing practicality.
19
3
Share

How many points will be deducted for a motor vehicle failing to yield to a school bus as required?

Motor vehicles that fail to yield to a school bus as required will be deducted 6 points. Below is the relevant legal information: 1. Road traffic safety violations: According to the Road Traffic Safety Violation Scoring System (Item 14), driving a motor vehicle without yielding to a school bus as required will result in a deduction of 6 points. 2. School Bus Safety Management Regulations: Article 33 of the School Bus Safety Management Regulations stipulates that when a school bus stops on the road to pick up or drop off students, it must park on the right side of the road, activate the hazard warning lights, and display the stop sign. When a school bus stops on a road with only one lane in the same direction, vehicles behind must stop and wait, and are not allowed to overtake. When a school bus stops on a road with two or more lanes in the same direction, vehicles in the lane behind the school bus and in adjacent lanes must stop and wait, while vehicles in other lanes should slow down and pass. Vehicles waiting behind the school bus must not honk or use lights to urge the school bus. School buses have special status and absolute priority.
5
2
Share

What is the FORO car?

FORO is the Ford F-150, also known as the Raptor in China. It is a four-door, five-seat pickup truck produced by Ford Motor Company. Below are some details about the Ford F-150: 1. **Powertrain**: The Ford F-150 is equipped with a 3.5-liter V6 twin-turbocharged engine, available in two versions: low power and high power. The low-power version delivers a maximum horsepower of 380 HP, a maximum power output of 280 kW, and a maximum torque of 672 N·m. The high-power version offers a maximum horsepower of 422 HP, a maximum power output of 310 kW, and a maximum torque of 678 N·m. 2. **Dimensions**: The Ford F-150 is notably large, with dimensions measuring 5910*2192*1992 mm. 3. **Drivetrain**: The Ford F-150 comes standard with a four-wheel-drive system across all models.
13
4
Share

How long does it take to take the driving test for Subject 2?

Subject 2 requires 2 hours of theoretical training and 22 hours of practical training before taking the test. The following are precautions for Subject 2: 1. Reverse Parking: The main points for deduction in reverse parking include running over the line, failing to enter the parking space, exceeding the time limit, and not following the designated route. After the new regulations, a time limit of 210 seconds was added for reverse parking. Exceeding this time will result in failure. During the test, you must first reverse into the right parking space, then the left one. Not following this order will also result in failure. Pay attention to the 30cm margin when reversing. 2. Parallel Parking: The main points for deduction in parallel parking include the turn signal, the 30cm margin, and running over the line. When entering the test area, turn right in advance and align the highest point of the windshield wiper with the roadside line to adjust the 30cm margin. During the reverse, remember the first right full turn, straightening, left full turn, parking in the space, turning on the left turn signal, and observing the rearview mirror when exiting to prevent the wheels from running over the line. 3. Right-Angle Turn: The main points for deduction in the right-angle turn are the turn signal and running over the line. After entering the test area, turn on the turn signal and turn it off after the voice prompt. Incorrect operation of the turn signal will deduct 10 points. After entering the right-angle turn, adjust the 30cm margin between the car body and the line. The reference point is the same as in parallel parking. When making the full turn, slightly release the clutch to prevent stopping or stalling. Straighten the car body after the rear wheels exit to prevent running over the line.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.