···
Log in / Register

What is the fuel consumption of the Xiangling V3?

5 Answers
StAndres
07/25/25 7:55am

The fuel consumption of the Xiangling V3 is 6.8-9.2L per 100 kilometers. Below is an introduction to the fuel consumption of the Xiangling V3: 1. Overview: The Xiangling V3 offers a large loading space to meet various size requirements. With a body width of 1700mm, it can be configured with a 3700mm ultra-long cargo box for single-row models or a 2700/3020mm cargo box for double-row models, and a cab ground clearance of 615mm. 2. Powertrain Configuration: The Xiangling V3 has undergone a comprehensive power upgrade, significantly improving acceleration performance. The engine meets the National VI emission standards and can be equipped with the Xiaokang 1.5T turbocharged engine, ensuring ample power even when fully loaded, adapting to various transportation scenarios. During driving, you can clearly feel the vehicle's quick start, rapid acceleration, and stable speed increase. It offers stronger power, lower fuel consumption, and higher economic efficiency.

Was this review help?
4
3
Share
McAshley
08/11/25 1:36pm

I've been driving the Xiangling V3 for over a year and find its fuel consumption well controlled. For city deliveries, it averages around 7.5 liters per 100 kilometers; on highways at higher speeds, it can drop to 6.8 liters. However, if overloaded with heavy cargo, consumption can jump above 8 liters. Driving habits are key: avoid sudden acceleration, start smoothly, maintain proper tire pressure, and service the engine regularly to save on fuel costs each month. Road conditions also significantly impact consumption—stop-and-go traffic can push it up to 9 liters. Overall, this economical vehicle reliably delivers between 7-9 liters per 100 kilometers in daily use.

Was this review help?
16
1
Share
Expand All
DelElliott
09/27/25 6:26am

The fuel consumption of the Xiangling V3 is quite noteworthy, and I'm analyzing it from a technical perspective regarding its engine design. It typically comes with a 1.5L gasoline engine, with official data showing 7-9 liters per 100 kilometers. Actual usage depends on conditions. The engine's efficiency is the main factor, but transmission matching is also crucial; automatic transmissions may consume slightly more fuel than manual ones. Aerodynamic drag and vehicle weight are key: empty on the highway, it can be controlled to around 7 liters, but when fully loaded, resistance increases, easily pushing it up to 8.5 liters. Driving habits play a significant role—sudden acceleration or frequent braking can drive up fuel consumption. It's recommended to regularly check the air filter and spark plugs, as aging of these small components can increase fuel consumption. Overall, maintaining fuel consumption within the 7-9L/100km range and adjusting flexibly based on vehicle conditions ensures long-term peace of mind.

Was this review help?
19
4
Share
Expand All
Figueiredo
11/10/25 8:26am

Discussing the fuel consumption of the Xiangling V3 from an operational cost perspective. I use this vehicle for small business operations, with an average fuel consumption of 7.8 liters per 100 kilometers. Based on current fuel prices, the cost per kilometer is around 0.4 yuan, totaling 120 yuan for a daily distance of 300 kilometers. These figures are quite realistic: for short-distance urban deliveries, fuel consumption may rise to 9 liters, increasing costs; on long-distance trips, it smoothly drops to 7 liters, saving money. To be cost-effective, it's essential to focus on daily habits: avoid overloading, maintain a steady speed, and don't set the air conditioning to maximum. I've experimented with lighter loads on highways, saving 20% on monthly fuel expenses. Therefore, fuel consumption isn't a fixed value—it can vary between 7-9 liters, and with fuel-saving techniques, it's easy to keep it at the median.

Was this review help?
10
2
Share
Expand All
JustinAnn
01/01/26 3:24am

I commute to work in the city with my Foton Sauana V3, and the fuel consumption during traffic jams is the most annoying. On average, it consumes about 8 liters per 100 kilometers: during peak hours with frequent stops and starts, the fuel consumption can reach 9 liters; on weekends when driving leisurely in the suburbs, it can drop to just over 7 liters. Many factors affect this, like turning on the AC at high fan speed, which adds about 0.5 liters; the vehicle condition is also crucial—worn tires increase resistance, making fuel consumption rise quickly. I use it to carry some miscellaneous items, keeping the rear compartment tidy and uncluttered to reduce wind resistance, which helps lower fuel consumption a bit. For city driving, I recommend using lower gears steadily and avoiding rushing through red lights, which can help keep fuel consumption between 7.5 and 9 liters. Developing a habit of tracking fuel consumption with a small app is a big help.

Was this review help?
7
2
Share
Expand All
More Forum Discussions

What is the fuel consumption of the CX-4?

The official fuel consumption of the Mazda CX-4, as per the Ministry of Industry and Information Technology, ranges between 6.3-7.3L/100km depending on the model. Below is relevant information: 1. Interior: The interior is full of a technological feel, with the cannon-style instrument panel being one of the most popular designs on the market today, offering clear and easy-to-read displays. The steering wheel, made of Italian imported top-grain leather, provides a comfortable and refined touch. 2. Introduction: The Mazda CX-4 is a compact coupe SUV under the Mazda brand. The instrument panel features black pillar buttons, or the large button on the left side of the multifunction steering wheel can be used to view the total mileage, single-trip mileage, instantaneous fuel consumption, and average fuel consumption.
8
1
Share

What are the gray spots on a white car?

White cars have gray spots on the paint surface, which are dust particles attached after acid rain corrosion. These can be easily removed using a clay bar. Methods to remove spots on white car bodies: Spray automotive cleaner onto the spotted areas on the white car body; then let it sit for two minutes to allow the cleaner to fully react with the spots; carefully wipe the spots with a cloth. If the entire car is covered with large spots, wash the car thoroughly and perform a full-body polish using a polishing machine with a fine finishing compound, setting the machine speed between 1200 to 1500 RPM. Wash the car frequently and try to park it in a garage or cover it with a car cover. Cleaning wax and polishing are the most cost-effective methods to treat water spot stains on cars. If these methods fail to remove the water spot stains, the only remaining option is a full-body repaint. A full-body repaint is expensive and can significantly reduce the resale value of the car. Therefore, to avoid such situations, car owners should pay attention to regular paint maintenance.
17
3
Share

What lights should be turned on during daytime driving?

During daytime driving, turn signals should be activated as required when making turns, and headlights should be turned on in advance when entering tunnels. In conditions of low visibility such as fog, rain, snow, dust, or hail, front headlights, clearance lights, and rear position lights should be turned on. Motor vehicles must use turn signals as stipulated by regulations: the left turn signal should be activated in advance when turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn; the right turn signal should be activated in advance when turning right, changing lanes to the right, returning to the original lane after overtaking, or pulling over to the roadside. Article 47 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When overtaking, a motor vehicle should activate the left turn signal in advance and switch between high and low beams or sound the horn. On roads without a central dividing line or with only one lane in the same direction, the vehicle ahead should reduce speed and move to the right to yield when conditions permit, upon receiving an overtaking signal from the vehicle behind. The overtaking vehicle should pass from the left side of the vehicle ahead only after ensuring a sufficient safe distance, and after establishing the necessary safe distance from the overtaken vehicle, activate the right turn signal and return to the original lane.
11
4
Share

Where is the carbon canister solenoid valve located on the Ford Mondeo Zhisheng?

The carbon canister solenoid valve is located beneath the engine, within the engine compartment. Here is some relevant information: 1. Gasoline: Gasoline is a relatively volatile liquid, and it tends to evaporate inside the car's fuel tank. If the evaporated gasoline vapors are directly released into the atmosphere, it can cause pollution and may not be safe. If the vapors are not released, it can lead to increased pressure inside the fuel tank, which might result in a fuel tank explosion. 2. Carbon Canister: The carbon canister absorbs the vapors produced by gasoline evaporation. If the carbon canister solenoid valve is damaged, it can cause the engine to experience insufficient power. It may also lead to increased fuel consumption in the engine.
3
3
Share

How early can a private car's annual inspection be conducted?

According to regulations, the annual inspection should be applied for within 90 days (approximately 3 months) before the due date. Additionally, all traffic violations of the vehicle must be resolved before the annual inspection. Any inspection conducted after the expiration date is considered overdue. The following items are required for the vehicle's annual inspection: 1. Compulsory traffic insurance (CTPL): Before the annual inspection, check the validity period of the CTPL, which includes the vehicle and vessel tax. If it has expired or will expire within three months after the inspection date, it is recommended to renew it in advance. 2. ID card of the owner or the agent: The vehicle owner can attend the inspection in person or authorize someone else to do so, but the agent must carry their ID card; otherwise, the inspection cannot proceed. 3. Vehicle license: In addition to the agent's ID card, the vehicle's license is also required for the annual inspection; otherwise, the inspection cannot proceed.
16
4
Share

Is it normal to have water inside the water meter glass cover?

It is normal to have water inside the water meter glass cover. This phenomenon occurs because the water used for pressure testing during installation was not completely drained, leaving water inside the glass cover. It may also be related to the water pressure in your home. The following precautions should be taken when installing a water meter: 1. The water meter should ideally be installed about one meter above the ground: Additionally, sufficient space should be left around the water meter to facilitate future maintenance, card insertion, etc. 2. Do not install the water meter in damp or heavily polluted areas: This is mainly to prevent debris from entering the water meter and affecting its normal operation. 3. The card insertion area of the water meter must not be contaminated: This is to avoid damaging the water meter's functionality and preventing it from operating normally.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.