What is the fuel consumption of the X1?

1 Answers
JamesFitz
07/29/25 9:17pm
Average fuel consumption is 8.9 liters per 100 kilometers. Below is a related introduction about fuel consumption per 100 kilometers: Introduction to fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when driving a certain speed on the road for 100 kilometers. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated as the theoretical experimental fuel consumption data for the vehicle model at specified speeds. Calculation method: (Refueling amount ÷ fuel price) ÷ kilometers driven × 100 = fuel consumption (liters). Most vehicles now display the fuel consumption per 100 kilometers.
Was this review help?
17
4
Share
More Forum Discussions

How Long Can a Car Air Conditioner Run?

With the car running, the air conditioner can be left on continuously. If the car engine is turned off and the air conditioner operates at full capacity, the vehicle battery can power it for approximately 8-10 minutes. The electricity consumed by the air conditioner comes from either the battery or the alternator. When the car is idling or in motion, the engine is running, so all electrical devices in the car are powered by the alternator. However, if the car is turned off, the engine stops, and the alternator cannot generate electricity, leaving only the battery to supply power. The battery's capacity is limited. The duration the air conditioner can run primarily depends on the power of the car's air conditioner and the battery's capacity. Most standard household cars today have a 12V, 50Ah battery, giving a total capacity of 600Wh, meaning it can power a 600W device for one hour. In reality, the power consumption of a car air conditioner is much higher than 600W, typically around 3000W. In cooling or heating mode, the battery can only sustain the air conditioner for about 10 minutes, which can easily lead to over-discharge. Precautions for Using Car Air Conditioners: After turning off the car, the engine stops working. The principle of a car air conditioner is different from that of a home air conditioner. Home air conditioners use electricity for cooling, while car air conditioners rely on the engine to function. Always remember to turn off the air conditioner and all electrical devices after parking to avoid damaging the battery's lifespan, as the alternator cannot generate power when the engine is off. Most importantly, forgetting to turn off the air conditioner before shutting down the car and restarting the engine later will cause the starter motor to bear the load during startup, further reducing the battery's lifespan.
18
1
Share

What type of transmission does the Honda City use?

The Honda City is equipped with a 5-speed manual transmission and a continuously variable transmission (CVT). It is a compact model under the GAC Honda brand. Taking the Honda City 2019 1.5L Manual Base Edition as an example: its exterior dimensions are 4450mm in length, 1695mm in width, and 1477mm in height, with a wheelbase of 2600mm. The body structure is a 4-door, 5-seater sedan. The Honda City 2019 1.5L Manual Base Edition is powered by a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131 HP, a maximum power of 96 kW at 6600 rpm, and a maximum torque of 155 Nm at 4600 rpm.
9
1
Share

Where is the Corolla engine number located?

The Corolla engine number is located on the side of the rear end of the engine. If you need to trace the engine number, you will have to remove the starter and intake pipe. If you just want to check the engine number, you can open the hood, and the vehicle's factory nameplate will have the engine number. Additionally, the engine number is also listed on the vehicle's registration certificate. The Corolla's body dimensions are 4530mm in length, 1705mm in width, and 1490mm in height, with a wheelbase of 2600mm. It is equipped with a 1.6L Toyota 1ZR-FE all-aluminum inline four-cylinder engine, which has a displacement of 1.6L, a maximum power output of 88kW, and a peak torque of 152Nm. In terms of transmission, it comes with a 5-speed manual or a 4-speed automatic transmission.
16
0
Share

What to Do When the Malfunction Indicator Light Comes On in the 10th-Generation Civic?

The solutions for the malfunction indicator light coming on in the 10th-Generation Civic: 1. It is essential to use a specialized diagnostic computer to read the engine fault codes. After clarifying the specific meaning of the fault codes and analyzing the relevant data stream, an accurate judgment can be made; 2. Promptly visit a specialized repair shop for a computer diagnosis of the engine control system, and thoroughly eliminate the related faults based on the computer diagnosis results. The 10th-Generation Civic has a length, width, and height of 4649mm, 1800mm, and 1416mm respectively, with a wheelbase of 2700mm. It is a compact sedan launched by Honda, and compared to other models in the same class, this car offers relatively spacious interior.
11
3
Share

How many liters of engine oil does the Haval H6 use?

Haval H6 generally uses about 3.8 to 4 liters of engine oil. You can refer to the data provided in the user manual for refilling. As an urban SUV, the Haval H6 features a straight roof line in its design, which effectively ensures ample headroom inside the cabin. It is equipped with the GW4D20 Green Quiet 2.0VGT engine, delivering a maximum power of 150 horsepower and a maximum torque of 310 Nm. The Haval H6 comes standard with features such as headlight height adjustment, delayed headlight shut-off for home lighting, four-way steering wheel adjustment, dual airbags, and rear air conditioning vents. Higher trim models are additionally equipped with intelligent and convenient features including a cruise control system, intelligent voice GPS navigation system, smart wiper and lighting control, side airbags, front and rear integrated side safety curtains, ESP electronic stability system, and a tire pressure monitoring system.
3
2
Share

How many milliliters of engine oil should be added to the UY125?

When the engine oil is completely drained, the UY125 can be filled with 650ml of oil. However, it is generally difficult to achieve this, so adding approximately 600ml is sufficient in practice. Types of engine oil suitable for the UY125: According to the UY125 manual, you should purchase SG, SH, SJ, or SL grade 10W-40W four-stroke motorcycle engine oil. For most motorcycles, during the break-in period of a new bike, the first oil change is typically required between 500–1000 kilometers, followed by subsequent oil changes every 2000 kilometers. How to handle overfilling engine oil: You can use the pump mechanism from a shampoo or detergent bottle to remove excess oil. The oil level should remain within the range marked on the dipstick.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.