What is the fuel consumption of the Wuling Rongguang V 1.5?

1 Answers
McAlina
07/30/25 5:16am
The comprehensive fuel consumption of the Wuling Rongguang V 1.5 is 6.6L/100km. Below is an introduction to the Wuling Rongguang V: 1. Power system: The Wuling Rongguang V is equipped with two gasoline engines, a 1.2L and a 1.5L. The 1.2L engine has a maximum power of 88 horsepower at 6000rpm and a maximum torque of 116 Nm at 3600-4200rpm, while the 1.5L engine has a maximum power of 112 horsepower at 5800rpm and a peak torque of 146.5 Nm at 3600-4000rpm (all data are for the China V emission standard version). 2. Body dimensions: The Wuling Rongguang V measures 4415mm in length, 1685mm in width, and 1850mm in height, with a wheelbase of 2720mm.
Was this review help?
19
1
Share
More Forum Discussions

Where to Check Fuel Consumption in Fista?

Fista's fuel consumption can be viewed on the trip computer display located on the vehicle's dashboard. Here is some relevant information about Fista: 1. Interior: Based on Hyundai's latest design style, with clear functional divisions. 2. Engine: Equipped with two types of engines: one is a 1.4-liter turbocharged engine, and the other is a 1.6-liter turbocharged engine. The 1.4-liter turbocharged engine has a maximum power of 103 kW, maximum torque of 242 Nm, maximum power speed at 6000 rpm, and maximum torque speed ranging from 1500 to 3200 rpm. The 1.6-liter turbocharged engine has a maximum power of 150 kW, maximum torque of 265 Nm, maximum power speed at 6000 rpm, and maximum torque speed ranging from 1500 to 4500 rpm.
4
1
Share

How many points will be deducted for making a U-turn over a crosswalk?

According to the Road Traffic Safety Law, three points will be deducted from the motor vehicle driver's license. During daily driving, it is essential to avoid making U-turns on crosswalks as it poses certain dangers to pedestrians and can cause traffic congestion. Below are the situations regarding U-turns: I. Situations where U-turns are allowed: 1. On yellow grid line sections of the road without central guardrails. 2. Where there is no 'No U-turn' sign in the middle of the road. 3. Where yellow solid and dashed lines are marked on the road. The solid line side prohibits overtaking and U-turns, while the dashed line side allows overtaking and U-turns. II. Situations where U-turns are prohibited: 1. Intersections marked with 'No U-turn' signs. 2. If the centerline of the road is solid, whether it is a single yellow line or double yellow lines, U-turns are 'prohibited'. 3. U-turns are prohibited at intersections where left turns are banned.
4
5
Share

How to Deal with Water in Engine Oil?

The method to deal with water in engine oil is: do not start the engine, then check the cause of water leakage. After solving the problem, completely drain the original oil and replace it with new oil. Most of the additives in engine oil are surfactants, which are emulsifiers in a sense. When mixed with water and circulated by the pump or stirred, it is easy to emulsify into a brownish-yellow emulsion. If there is a large amount of water, it may even emulsify into a milky-white emulsion. Therefore, if the used oil appears milky white, it may be due to radiator leakage or external water mixing into the lubrication system. In this case, the oil should be drained and the vehicle should be inspected. Continuing to use such oil will not only reduce the strength of the oil film but also cause foaming or emulsification and deterioration of the oil. In mild cases, it may cause rusting of mechanical parts, and in severe cases, it may lead to serious mechanical accidents such as cylinder scoring or bearing seizure.
16
2
Share

What is the appropriate amount to fill the fuel tank?

According to the relevant mandatory national standards, the rated capacity of a vehicle fuel tank should be controlled at 95% of the maximum safe capacity of the fuel tank. Taking a 60-liter fuel tank as an example, it can be filled up to a maximum of 75 liters, but the stored fuel should not exceed 60 liters. More relevant information is as follows: 1. The accuracy of the refueling amount cannot be judged based on the rated capacity of the fuel tank. The fuel tank of a fuel-powered vehicle is a container, not a measuring tool, so it cannot be used as a basis for judging measurement accuracy. Moreover, according to the relevant mandatory national requirements, the rated capacity of a vehicle fuel tank should be controlled at 95% of the maximum safe capacity of the fuel tank. 2. Many vehicle fuel gauges operate through the up and down movement of a float inside the tank, which drives an electronic sensor. The sensor then transmits the generated electronic signal to the fuel gauge pointer, displaying it on the fuel gauge, resulting in significant potential errors.
16
0
Share

What are the methods for hill start?

Methods for hill start include: 1. Handbrake method - After stopping on the slope, keep the foot brake pressed, depress the clutch, pull the handbrake tight and then release the foot brake, rev the engine, slowly release the clutch, and release the handbrake to complete the hill start; 2. Semi-clutch method - While keeping the foot brake pressed, slowly release the clutch until the vehicle body shakes, then release the brake and press the accelerator; 3. Heel-toe method - Press the brake with the heel and the accelerator with the toe, rev the engine while slowly releasing the clutch with the left foot, when the vehicle tends to move forward, lift the right heel off the brake, continue to press the accelerator and release the clutch to complete the hill start. The key is to control the clutch well, mostly in first gear, hold the upper left of the steering wheel with the left hand, look straight ahead with both eyes, pull the handbrake lever with the right hand, press the lock button of the lever with the thumb to be ready to release at any time, slowly release the clutch pedal, and slowly press the accelerator.
7
2
Share

Is it normal for a car to leak water when the air conditioning is on?

It is normal for a car to leak water when the air conditioning is on. This water is the condensate from the air conditioning system. When the air conditioning is cooling, the temperature of the evaporator and the air ducts leading to the passenger compartment is very low. The water vapor in the outside air will liquefy and condense on the walls of the air conditioning pipes and housing at such low temperatures. If there is no way to drain it, it can cause dampness around the air conditioning system and corrosion of components. When designing a vehicle, pipelines are reserved to collect and drain the condensate. The outlet to the outside of the car is usually located directly below the center of the dashboard, which, when projected to the underside of the car, is basically at the front of the transmission. Therefore, in summer, if you start the engine, turn on the air conditioning, and leave the car parked for a while before driving away, you will often see a puddle of water on the ground. This puddle is actually the result of water vapor in the air condensing due to the cold, which is a normal phenomenon.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.