What is the fuel consumption of the Wrangler?

1 Answers
MacVincent
07/30/25 6:31am
The comprehensive fuel consumption of the Wrangler is 8.9-9.9L/100km. There are currently 7 models of the Wrangler on sale: the High Altitude four-door version, High Altitude Alaska Aurora Green Special Edition, Sahara four-door version, and 80th Anniversary Edition, all with a comprehensive fuel consumption of 9L/100km. The Sahara two-door version has a comprehensive fuel consumption of 8.9L/100km. The Rubicon two-door version has a comprehensive fuel consumption of 9.6L/100km. The Rubicon four-door version has a comprehensive fuel consumption of 9.9L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 10.0-12.6L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, will increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
2
5
Share
More Forum Discussions

How Long Should a Car Battery Be Charged?

For deeply discharged batteries, the charging time should be 10-15 hours to reach a full charge. There are two methods for charging a car battery: fast charging and slow charging. Below are relevant introductions about battery charging: 1. Fast charging (constant current charging): Many car owners believe that fast charging can save time, requiring only 3-5 hours; however, this is not the case. Fast charging merely quickly activates the surface of the battery, while the interior of the battery is not fully charged. 2. Slow charging (constant voltage charging): Another method for charging a car battery is slow charging, which takes 10-15 hours. Deeply discharged batteries must undergo slow charging; otherwise, insufficient charging time and charge quantity will directly affect the driving performance of the car.
5
1
Share

What is the fuel consumption of the Mondeo 1.5T?

The fuel consumption of the Mondeo 1.5T is 7.3 liters. Taking the 2020 Mondeo 1.5T EcoBoost 180 Fashion model as an example: The manufacturer of this car is Changan Ford, its class is mid-size car, the energy type is gasoline, the transmission is a 6-speed automatic, and the body type is a 4-door, 5-seater sedan with turbocharged intake. The car's length, width, and height are 4873mm, 1852mm, and 1470mm respectively, with a wheelbase of 2850mm. The drive type is front-wheel drive, the front suspension is MacPherson independent suspension, the rear suspension is multi-link independent suspension, and the power steering type is electric power steering.
16
2
Share

What to Do If the Vehicle Brand and Model Information Cannot Be Filled in the Beijing Entry Permit Environmental Inspection?

If the vehicle brand and model information cannot be filled in the Beijing Entry Permit environmental inspection, you can check the vehicle purchase tax certificate, which contains the complete model description. Below is some information on filling in the vehicle brand and model for the Beijing Entry Permit environmental inspection: 1. Notes: When filling in the information, use English parentheses, input in uppercase English letters, and ensure the vehicle number is correct. 2. Special Cases: For company vehicles, you need to bring a copy of the organization code certificate of the out-of-town Beijing-based institution. In other words, if an out-of-town company vehicle wants to apply for a long-term Beijing Entry Permit, it must have a branch in Beijing and be affiliated with the original unit. Otherwise, long-term entry procedures cannot be processed, and only short-term procedures can be applied for multiple times.
15
2
Share

What does single-pedal mean in electric vehicles?

Electric vehicle single-pedal means using one accelerator pedal to complete both acceleration and braking operations of the vehicle. The following is a detailed introduction to the single-pedal mode: 1. Working principle: The single-pedal mode uses the braking effect of kinetic energy recovery to achieve deceleration. Under the kinetic energy recovery system of electric vehicles, the vehicle utilizes the inertia during deceleration to allow the wheels to drive the motor to generate electricity, thereby bringing a deceleration effect to the vehicle. When driving with kinetic energy recovery, releasing the accelerator pedal will bring the same deceleration process as braking. 2. Brake pedal usage: Although in normal driving conditions, the single-pedal mode is sufficient to complete most acceleration and deceleration operations, in emergency situations requiring sudden braking, the driver still needs to use the brake pedal to complete the action.
8
3
Share

How to activate the one-touch window lift for Venucia D60?

The method to activate the one-touch window lift for Venucia D60 is: 1. Locate the window lift button on the left side of the driver's seat, press and hold the button until the window is fully raised; 2. After the window is fully closed, continue to hold the button for approximately 2 to 5 seconds; 3. When you hear a "click" sound, it indicates that the car programming is complete; 4. At this point, you can release the button to achieve one-touch window lift. Taking the Venucia D60 2021 1.6L Entry Manual Comfort Edition as an example: The manufacturer of this car is Dongfeng Nissan, the vehicle class is compact car, the energy type is gasoline, the transmission is 5-speed manual, and the body type is a 4-door 5-seater sedan.
19
1
Share

Why is there an exhaust smell in the cab?

The exhaust smell in the cab is due to the air-fuel mixture being too rich, incomplete combustion, or carbon deposits in the throttle and cylinders. The cab is an important part of the body of trucks and special vehicles, serving as the workplace for professional drivers day and night. Its structure directly affects the driver's safety, work efficiency, and health. The cab is generally made of a thin-shell metal structure and is flexibly connected to the frame, not bearing any load, which makes it a non-load-bearing body. The throttle is a controllable valve that regulates air intake into the engine, available in two types: traditional cable-operated and electronic throttle. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to perform work.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.