What is the fuel consumption of the Volkswagen Teramont 4WD?

1 Answers
DelOwen
07/29/25 6:06pm
Introduction to the fuel consumption of the Volkswagen Teramont 4WD: 1. The comprehensive fuel consumption of the 2.0T 4WD version of the Teramont is approximately 11 liters per 100 kilometers. 2. The comprehensive fuel consumption of the 2.5T 4WD version of the Teramont is approximately 11.7 liters per 100 kilometers. The following is an introduction to the Volkswagen Teramont: 1. The Teramont is a mid-to-large-sized SUV under the Volkswagen brand. 2. This vehicle is equipped with three types of engines: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 2.5-liter turbocharged engine. 3. The model equipped with the low-power version 2.0-liter turbocharged engine is front-wheel drive, while the other two versions are 4WD. 4. The 4WD models use a multi-plate clutch central differential.
Was this review help?
7
3
Share
More Forum Discussions

What does ivtec mean?

ivtec system is the English abbreviation of Honda's intelligent variable valve timing and lift electronic control system. The engines of new Honda cars are generally equipped with the ivtec system, which can continuously adjust the valve timing and also regulate the valve lift. The working principle of ivtec is: when the engine shifts from low speed to high speed, the computer automatically directs the engine oil to the small turbine inside the intake camshaft drive gear. Under the pressure, the small turbine rotates a certain angle relative to the gear housing, thereby causing the camshaft to rotate forward or backward within a 60-degree range. This changes the timing of the intake valve opening, achieving the purpose of continuously adjusting the valve timing.
15
1
Share

Is it mandatory to attend classes for Subject 1?

Attending classes for Subject 1 is not mandatory. Before taking the Subject 1 exam, you must complete 6 hours of study time, but the specific method can vary. It could involve attending classes, completing exercises online, or participating in online lectures, depending on the arrangements made by the local vehicle management office. For example, in Guangzhou, you are required to attend unified classes at designated locations by the vehicle management office, while in Jiangmen, you can study theoretical knowledge online without the need for unified class arrangements. Subject 1, also known as the Subject 1 theory test or driver theory test, is part of the assessment for obtaining a motor vehicle driver's license. According to the regulations on the application and use of motor vehicle driver's licenses, the Subject 1 exam covers topics such as road traffic rules, traffic signals, handling of traffic safety violations and accidents, regulations on the application and use of motor vehicle driver's licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules.
14
1
Share

What transmission is used in the Changan CS95?

Changan CS95 is equipped with an imported Aisin 6-speed automatic transmission. This transmission can withstand a maximum torque of 450Nm and integrates six advantages: fuel economy, control function, transmission efficiency, fast shift response, advanced neutral function, and lifetime maintenance-free transmission oil. The Changan CS95 is positioned as a mid-size SUV, with body dimensions of 4949mm in length, 1930mm in width, and 1790mm in height, a wheelbase of 2810mm, a top speed of 190km/h, and is powered by a 2.0L turbocharged engine with front-wheel drive.
18
1
Share

How to operate the clutch pedal for Subject 2 practice?

Methods for operating the clutch pedal in Subject 2 practice: 1. Keep your left heel on the ground with the foot at an angle of over 45 degrees. Press the clutch pedal with the ball of your foot, avoiding a vertical 90-degree angle as this may cause the pedal to slip to the arch, making it difficult to apply force. 2. When releasing, keep your heel on the ground and gradually lift the ball of your foot. 3. Remember, when lifting, don't use all your force to raise the foot; retain some downward pressure. 4. While the car is moving, minimize the range of foot movement to ensure smooth driving. 5. When stopping, first press the clutch pedal fully with your left foot, then gently apply the brake with your right foot. The clutch serves to engage and disengage, located between the engine and the transmission, allowing it to either separate or connect the engine to the transmission.
8
2
Share

Will running a red light with a temporary license plate result in penalty points?

Yes, penalty points will be incurred. According to Article 90 of the Road Traffic Safety Law, drivers who violate traffic signals will be fined 200 yuan and receive 6 penalty points. Temporary license plates are paper permits allowing vehicles to operate temporarily on roads. Traffic violation penalties are not related to whether the vehicle has a temporary or permanent license plate; they are primarily imposed for the act of violating traffic rules. Determining a red-light violation requires at least three pieces of photographic evidence: the vehicle not having left the stop line when the light turns red; the vehicle passing through the intersection while the light is red; and the vehicle having crossed the line and continuing to move forward after the light turns red. Article 26 of the Road Traffic Safety Law states: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Article 44 states: When passing through intersections, motor vehicles must follow traffic signals, signs, road markings, or the directions of traffic police. Six scenarios of running a red light: Stopping immediately after crossing the line at a red light (when the light turns red, the vehicle cannot stop in time and the front crosses the stop line): If the vehicle has just crossed the stop line when the light turns red but stops immediately, this does not count as running a red light and will not be penalized. However, if there is noticeable movement after crossing the line, penalties will apply. Electronic monitoring captures three photos for red-light violations: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered running a red light, incurring 6 penalty points under the new regulations. Running a red light under police direction (the signal is red, but the traffic officer signals to proceed): When there is a conflict between the traffic signal and the officer's gesture, drivers must obey the officer's on-site command. If a red-light violation occurs due to police direction, the driver can obtain a diversion certificate from the local traffic police station to avoid penalties. If the party disagrees with the penalty, they can appeal through administrative reconsideration or litigation. Stopping with the entire vehicle over the line at a red light (failing to brake in time, causing the entire vehicle to cross the stop line): If the entire vehicle crosses the stop line but does not move further, this is not considered running a red light but rather over-the-line parking. Reversing after over-the-line parking (attempting to reverse to avoid penalties after crossing the line at a red light): Motor vehicles must not reverse at railway crossings, intersections, one-way roads, bridges, sharp turns, steep slopes, or tunnels. Violations may result in a warning or fine. Accidentally running a red light behind a large vehicle (due to obstructed view from the large vehicle ahead, following it through the intersection): Drivers must maintain sufficient visibility to see traffic signals ahead and ensure a safe braking distance. Generally, if a vehicle is photographed following a large vehicle through an intersection, it is due to rushing the signal. Such behavior will be penalized as running a red light.
18
3
Share

What type of vehicle is the Beijing BJ40?

The Beijing BJ40 is positioned as a compact SUV. In terms of exterior design, the vehicle adopts a family-style design, retaining the signature five-slot front grille, which is also adorned with chrome trim. The front fascia features newly designed headlights. The Beijing BJ40 is available in both gasoline and diesel versions. The diesel variant is powered by a 2.0T turbocharged diesel engine, delivering a maximum power of 110 kW and a peak torque of 350 Nm. The gasoline version comes with either a 2.0T or a 2.3T turbocharged engine. The 2.0T engine produces a maximum power of 160 kW and a peak torque of 320 Nm, while the 2.3T engine generates a maximum power of 184 kW and a peak torque of 350 Nm.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.