What is the fuel consumption of the Volkswagen Santana?

2 Answers
BrodyLynn
07/24/25 1:52pm
The fuel consumption of the Santana is 5.62—7.25L/100km. The fuel consumption of a vehicle mainly depends on the driving habits and the quality of the driving conditions. As long as the vehicle is used normally and maintained on time, it should be fine. When the fuel consumption is too high, it is necessary to clean the carbon deposits in the engine. Reasons for high fuel consumption: 1. Engine carbon deposits. Long-term operation of the vehicle inevitably leads to carbon deposits and sludge during fuel combustion. If these deposits and sludge are not cleaned in time, it will cause an increase in fuel consumption. 2. Spark plug failure. The function of the spark plug is to generate an electric spark with high voltage to ignite the air-fuel mixture. If it is damaged, the ignition energy will decrease, and the mixture will burn unevenly, leading to slower acceleration and increased fuel consumption. 3. Abnormal tire pressure. Incorrect tire pressure can also affect fuel consumption. When the tire pressure is too low or the tread is severely worn, the contact area between the tire and the road surface increases, friction increases, rolling resistance increases, and fuel consumption naturally rises. 4. Long-term heavy load. Overloading increases the vehicle's weight, increases driving pressure, and raises fuel consumption. 5. Poor fuel injector atomization. This may be caused by clogged fuel injectors, which greatly affects their performance and leads to increased fuel consumption. 6. Faulty car sensors. This is also a major cause of increased fuel consumption. When the coolant temperature sensor fails, the engine mistakenly thinks the car is in a cold state and continuously sends signals to inject fuel, leading to higher fuel consumption.
Was this review help?
17
4
Share
OLandon
08/11/25 7:48am
I've been driving a Volkswagen Santana for several years. In city stop-and-go traffic, the fuel consumption is usually around 9 to 10 liters per 100 kilometers, while it can drop to about 6.5 liters on the highway. Driving smoothly without harsh braking and controlling acceleration can help save fuel. Regular maintenance is crucial—I noticed more stable fuel consumption after changing the engine oil and air filter. Fuel consumption increases slightly when using air conditioning in summer, but it's better in winter as the engine heats up faster. Keeping tire pressure at the recommended level is important, as underinflated tires can increase fuel consumption. Remember, fuel consumption varies depending on driving habits and road conditions. Based on my experience, you can keep the combined consumption between 7 to 9 liters, resulting in a monthly fuel cost of around 600 to 700 yuan, which is quite acceptable.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

Is installation fluid necessary for applying window tint film?

It is not mandatory to use, but it facilitates better adhesion of the window tint film. Below is relevant information about installation fluid: Main components: The primary ingredients of installation fluid are filtered tap water combined with a proportionally measured neutral detergent. Potential difficulties with self-mixing: The drawback of self-mixing lies in the challenge of achieving the correct ratio, which may complicate the installation process. If the detergent concentration is too high due to improper proportioning, the film may slide excessively and fail to adhere tightly to the glass. Conversely, if the concentration is too low, the film may exhibit excessive friction and become immovable.
13
3
Share

Where is the production location of the domestic Bear brand tires?

Bear brand tires are not a domestic tire brand, their main production location is in Sweden. Overview: Car tires are one of the important components of a vehicle, directly in contact with the road surface. Together with the car suspension, they mitigate the impacts experienced during driving, ensuring good ride comfort and smooth driving. Moreover, they have a direct impact on the vehicle's driving safety and fuel consumption. Functions: They ensure good adhesion between the wheels and the road surface; improve the vehicle's traction, braking, and off-road capability; bear the weight of the car. The important role tires play in vehicles is increasingly being recognized by people.
9
0
Share

What should be noted after replacing tires?

After replacing tires, the following points should be noted: 1. When inflating the tires, ensure the tire temperature drops to normal levels to avoid affecting pressure judgment; 2. Inflate to approximately 2.5bar; 3. Ensure that tires on the same axle have identical tread patterns, structure, brand, and specifications. The functions of tires are: 1. To cushion the impact experienced during vehicle movement; 2. To ensure good comfort and smooth driving of the vehicle; 3. To maintain excellent adhesion between the wheels and the road surface, enhancing the vehicle's traction, braking, and off-road capability; 4. To bear the weight of the vehicle and ensure its driving performance.
4
0
Share

What are the differences between base models and high-end models?

The differences between base models and high-end models mainly lie in their configurations and performance. Configuration: In terms of interior, base models feature fabric seats while high-end models come with leather seats. For steering wheels, base models only serve the basic steering function, whereas high-end models can control navigation, car phone, audio system, cruise control, etc. Regarding air conditioning systems, base models have manual AC while high-end models are equipped with automatic AC. Performance: Overall, base models have inferior performance compared to high-end models. In terms of safety systems such as ABS braking system, EBD electronic brake-force distribution system, and EDL electronic differential lock system, base models are less equipped than high-end models.
18
1
Share

What Type of Tires Are Suitable for Deserts?

Deserts are suitable for deep-tread off-road tires and specialized sand tires, which require the tires to have wear-resistant and high-temperature-resistant characteristics. The precautions for tire usage are: 1. Pay attention to the degree of tire tread wear; 2. Avoid tire pressure being too high or too low; 3. Remove debris from the tread to prevent puncturing the tire body, leading to air leaks or blowouts; 4. Regularly rotate tires to prevent uneven wear. The functions of tires are: 1. Support the entire weight of the vehicle and bear the vehicle load; 2. Transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface, improving the vehicle's power, braking, and off-road capability; 3. Prevent severe vibrations and early damage to automotive components.
12
5
Share

Is It Normal for an Automatic Transmission Car's Gearbox to Overheat?

Mild overheating in an automatic transmission car's gearbox is normal. The heat comes from the conduction of engine and transmission temperature. The reason lies in the transmission not being effectively cooled. Below is a detailed introduction about car transmissions: Overview: The transmission is a device that changes the speed ratio and direction of motion, usually located between the clutch and the central drive. It can alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft according to different working conditions. Gear-driven transmissions generally consist of a casing and several gears. Classification: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were mainly 4AT. AT achieves automatic gear shifting through an electronically controlled automatic operating system. CVT is a true continuously variable transmission with fewer parts and a smaller size. DCT has two clutches.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.