What is the fuel consumption of the Vezel 1.5t?

What is the fault indicator symbol on the BMW X5 dashboard?

The fault indicator symbol on the BMW X5 dashboard is an exclamation mark. Below are detailed explanations of the exclamation mark appearing on the dashboard: 1. A triangle with an exclamation mark inside: This is a general fault indicator light. It appears when there is overheating of the dry dual-clutch transmission clutch, intervention or failure of the fuel cutoff system, parking sensor failure, external light failure, engine oil pressure sensor failure, or traction control system warning or failure. 2. A circle with parentheses and an exclamation mark inside: This is the brake system warning light. It lights up for a few seconds when the ignition is turned on and turns off after the engine starts. It lights up when the brake fluid level is too low or when there is a brake system failure. 3. A horizontal line with parentheses below and an exclamation mark inside: This is the tire pressure monitoring warning light. It lights up when the pressure in one of the vehicle's tires is too low.

13

0

Share

What Does Tire Section Width Mean?

Tire section width refers to the width of the tire's cross-section. The term 'section width' is used because, during the process of dissecting and analyzing a tire, it is typically cut, and the distance between the two sidewalls after cutting is the tire's section width. Below is relevant information: Benefits of a wider section width: 1. Tires with a larger section width increase the friction between the tire and the ground; 2. This not only enhances the tire's wet traction performance but also improves its water drainage capability, thereby increasing driving safety in rainy conditions; 3. Increasing the tire's section width can make the chassis appear lower, enhancing the overall premium feel of the car, while also improving power, braking performance, and stability.

11

3

Share

How to reset the tire pressure light on a 530li?

Press and hold the SET button with the tire pressure symbol located at the far right front of the gear lever for an extended period. Below is relevant information: 1. The tire pressure monitor automatically monitors and detects real-time "changes" in tire pressure during vehicle operation, alerting the owner to tire leaks, low pressure, or pressure increases due to rising ambient temperatures. 2. Classification of tire pressure monitors: Indirect tire pressure monitoring (WSB). When the pressure in any tire decreases, the "rolling radius" of that tire naturally becomes smaller, causing it to rotate slightly faster than the other wheels. The system identifies which tire has reduced pressure by comparing the "speed difference."

3

4

Share

BMW X5 ABS Sensor Malfunction?

BMW X5 ABS sensor warning light may illuminate due to reasons such as the ABS speed sensor sensing area being covered or poor ABS signal. ABS Speed Sensor Sensing Area Covered: When the ABS speed sensor sensing area is covered by mud, sludge, or other contaminants, it affects the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and calculating the wheel slip rate, thereby failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal operation. Poor ABS Signal: Poor signal transmission caused by loose connections between system wires or poor contact of the ABS relay can lead to system failure. The most common issue is a loose speed sensor wire connector causing malfunction, which will also display as a poor speed sensor signal in the ABS computer's fault memory. Solution: Check the wire connections and reconnect any loose parts.

20

0

Share

How to Solve the Problem of Slow Start and Weak Acceleration in Tiida?

Tiida's slow start and weak acceleration can be resolved by installing a throttle signal amplifier. The new Tiida is tuned for fuel efficiency, resulting in relatively low torque output from the engine. Combined with the CVT transmission, this can lead to insufficient torque. The reasons for slow start and weak acceleration in cars include: 1. Clogged fuel injectors, fuel leaks, reduced fuel pump power, or blocked fuel filters causing slow start and weak acceleration. 2. The engine requires not only fuel but also air. If components like the air filter or throttle are clogged or malfunctioning, leading to insufficient air intake, it can also result in weak acceleration and slow speed increase. 3. When the air conditioning is operating, it drives the compressor, which requires a significant amount of power, leading to slow acceleration and weak power in the car.

4

2

Share

What does a red exclamation mark inside a triangle on the dashboard indicate?

A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red exclamation mark inside a circle with parentheses, a yellow exclamation mark with a horizontal line below parentheses, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a transmission malfunction or transmission fluid level below the normal range. Transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with parentheses represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Anomaly: An exclamation mark with a horizontal line below parentheses is the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.

20

3

Share

What is the fuel consumption of the Vezel 1.5t?

What is the fault indicator symbol on the BMW X5 dashboard?

What Does Tire Section Width Mean?

How to reset the tire pressure light on a 530li?

BMW X5 ABS Sensor Malfunction?

How to Solve the Problem of Slow Start and Weak Acceleration in Tiida?

What does a red exclamation mark inside a triangle on the dashboard indicate?

What could be the reason for the sudden failure of the BMW X5 dashboard lights?

What is the relationship between Baojun and Wuling?

What Cars Do 4S Stores Sell?

What Does Auto Body Sheet Metal Mean?