···
Log in / Register

What is the fuel consumption of the Verano?

6Answers
LeLila
09/07/2025, 11:45:34 PM

Verano's official combined fuel consumption given by the MIIT is 5.8-6.3L/100km. Introduction to fuel consumption: Fuel consumption (Constant-Speed Fuel Economy): Constant-speed fuel consumption refers to the fuel economy indicator when a vehicle is driving at a constant speed on good road surfaces. Since constant-speed driving is a basic operating condition for vehicles on highways, and this type of fuel consumption is easy to measure, it is widely adopted. Combined fuel consumption: Combined fuel consumption is tested under different conditions such as urban roads, highways, and varying loads. It is only a reference, and actual fuel consumption may be higher or lower than this figure. For example, driving daily in busy city areas with frequent hard braking and acceleration can lead to higher fuel consumption, even reaching 10L/100km, which is quite normal.

Was this review help?
114
Share
McCorbin
09/19/2025, 10:32:25 PM

After driving a Buick Verano for several years, I found its fuel consumption quite practical. As a city commuter, my average fuel consumption in daily traffic jams is about 8 to 9 liters per 100 kilometers; it drops significantly on highways, down to around 6 liters. The official data claims a combined consumption of 7 to 7.5 liters, but actual figures depend on driving habits and road conditions—sudden acceleration and braking can spike fuel consumption by 10%, while gentle driving keeps it stable. I regularly check tire pressure and change engine oil, and these small details help me control fuel costs. Compared to the Corolla, the Verano is slightly higher in consumption, but it offers more power, making it better for uphill driving. I recommend new owners use the start-stop function to save fuel in traffic jams; overall, monthly fuel costs of five to six hundred yuan are not expensive.

Was this review help?
15
Share
Expand All
Lindsay
11/02/2025, 09:53:47 PM

Let's discuss the Verano's fuel consumption from a technical perspective, focusing on engine details. The mainstream configuration features a 1.5T engine paired with a CVT transmission, achieving optimized transmission efficiency with urban driving consumption around 8L/100km and highway cruising at approximately 6.5L/100km. Turbocharging and direct injection technologies enhance combustion efficiency, though full passenger load or AC usage may increase consumption by about 1L. Lightweight design reduces aerodynamic drag, while post-2020 software updates improved fuel control precision. Driving modes like Eco can save roughly 0.3L, making it 15% more fuel-efficient compared to older naturally aspirated versions. Regular air filter maintenance is crucial – neglect may lead to increased consumption. Overall, it strikes a good balance between power and energy efficiency.

Was this review help?
6
Share
Expand All
CorbinDella
12/16/2025, 09:53:48 PM

Fuel consumption is a practical consideration when choosing a new Verano. I always remind friends to check real user reports—the combined fuel economy ranges from 7 to 9 liters per 100km, varying by trim. The CVT automatic averages around 8L, while the manual saves 0.5L with steadier highway performance. City traffic spikes costs; avoiding rush hours and using ventilation instead of AC can save 0.8L. Monthly fuel expenses for 1,000km run about ¥600, offering decent value. Used-car age impacts efficiency—older models with clogged filters need maintenance for optimal consumption. Regular servicing is key to sustaining fuel economy.

Was this review help?
16
Share
Expand All
FelicityDella
02/05/2026, 10:44:28 PM

Driving the Verano daily is quite effortless, and the fuel consumption isn't as high as expected. In the city, 8 liters per 100 km is normal, but a friend shared some tips: maintaining cruise control on highways stabilizes it at 6 liters, and gentle starts and braking save fuel while keeping the ride smooth. The onboard display shows real-time data, teaching me to optimize habits and avoid sudden accelerations. Weekend joyrides slightly increase fuel consumption, but it's negligible overall—just two full fuel-ups per month cover entertainment expenses. Compared to my old car, it has ample power without sluggishness, lower wind resistance saving energy, making it suitable for people with a fast-paced lifestyle.

Was this review help?
13
Share
Expand All
VictoriaAnn
05/01/2026, 02:33:43 PM

I prioritize environmental protection and pay attention to the fuel consumption impact of the Verano. With an average of 7.5 liters per 100 kilometers and carbon emissions of 170 grams per kilometer, urban driving exacerbates pollution. I am accustomed to carpooling to reduce traffic congestion and utilize the start-stop function to save 20% fuel by turning off the engine during traffic jams. Choosing low-resistance tires and reducing weight by traveling light enhance energy efficiency. Regular maintenance ensures the catalytic converter operates efficiently, lowering exhaust emissions. In the long run, balancing fuel costs and environmental protection is key. I advocate for more people to switch to new energy vehicles, but as a traditional car, the Verano falls into the mid-level energy-saving category with decent practicality.

Was this review help?
4
Share
Expand All
More Q&A

Are Chassis Bolts Important?

Chassis bolts are very important. Safety Hazards: Loose bolts can pose significant safety risks without the owner's awareness. Therefore, car owners must pay attention to the inspection of automotive screws, especially those on the chassis. Inspection Cycle: The chassis endures substantial vibrations, so the screws on the chassis are specially treated by manufacturers, with enhancements in steel quality, hardness, and shock resistance. Generally, screws won't come loose unless the vehicle is of very poor quality, so there's no need to worry excessively. The recommended frequency for inspecting automotive screws is every one to two years during a maintenance visit to a 4S shop.
111
Share

Can You Turn on the Air Conditioner Directly After Starting the Car in Summer?

You should not turn on the air conditioner directly after starting the car in summer. Using the air conditioner in summer: When the external temperature rises above 35 degrees Celsius, the interior of a closed car can reach 65 degrees within 15 minutes, causing the emission of formaldehyde, benzene, toluene, xylene, etc., to be 5 to 7 times higher than normal. When you first get into the car, open the windows for ventilation for one to two minutes to allow the toxic air to dissipate before driving and turning on the air conditioner. Turning off the air conditioner in advance: Before reaching your destination, turn off the air conditioner in advance and keep the fan running. This not only helps avoid forgetting to turn off the air conditioner and starting the engine with it still running but also keeps the air vents dry, preventing moisture and bacterial growth.
101
Share

Can You Release the Clutch Immediately After Shifting to Second Gear?

You should not release the clutch immediately after shifting gears. Instead, you need to slowly release the clutch pedal. If the clutch pedal is released too quickly, the vehicle may experience significant jerking. Starting on Flat Roads: After pressing the clutch and shifting gears, the car's speed has not yet increased, so the clutch should be released gradually. Releasing the clutch too quickly may cause the engine to stall. You can wait until the clutch is fully released before applying throttle, as coordinating the clutch and throttle requires relatively advanced driving skills. Starting on Slopes: Hill starts are one of the most challenging aspects of driving. Not only should you avoid releasing the clutch immediately, but even a gradual release can sometimes cause the engine to stall. The correct procedure is to slowly release the clutch until the engine begins to vibrate, then release the brake pedal and immediately press the accelerator to maintain momentum. If you're not confident, you can also use the handbrake to ensure driving safety.
112
Share

What is the name of that behind the steering wheel?

The left side behind the steering wheel is called the light control lever, and the right side is called the wiper control lever. Light control lever: The function of the left lever is that pushing it upwards activates the right turn signal, pushing it downwards activates the left turn signal. Turning it to the first small notch switches on the parking lights, the second small notch switches on the headlights, and pulling it upwards activates the headlight flasher. Wiper control lever: Pushing the right lever downwards activates the wiper function, which is used during rain or when the windshield is not clear. Composition of the steering wheel: The steering wheel is mainly composed of a skeleton, foam, and corresponding mounting clips or screw holes for the driver airbag (DAB).
106
Share

What is the break-in mileage for a new car?

New cars typically have a break-in mileage of 1,000-2,500 kilometers, while imported vehicles generally require a longer break-in period, usually between 1,500-3,000 kilometers. Stages of the break-in period: The break-in period consists of three stages. The initial break-in occurs within the first 100 kilometers of driving, the preliminary break-in is achieved at 200 kilometers, and an oxidation film forms after approximately 3,000 kilometers. Driving speed: It's advisable to maintain low speeds during the break-in period. Generally, the maximum speed for trucks shouldn't exceed 45 km/h, while passenger cars should stay within 50-80 km/h. Additional precautions: Avoid letting the engine idle for too long before starting - about 30 seconds is sufficient. Refrain from emergency braking during the first 300 kilometers of driving.
114
Share

Why Can't a Motorcycle Start After Sitting for a Month?

The reasons why a motorcycle cannot start after sitting for a month are as follows: Fuel system reasons: Blockage in the low-pressure fuel line, loose pipes causing fuel leakage, air in the high-pressure fuel line, poor technical condition of the injector, and incorrect injection timing angle can all lead to the engine failing to start. Starting device reasons: Power supply failure, poor contact of the electromagnetic switch, poor contact between the starter motor commutator and brushes, slipping clutch in the starter transmission mechanism, and other reasons can also cause the engine to fail to start. Cylinder or air intake reasons: Damaged cylinder gasket causing air leakage, valves not sealing tightly leading to air leakage, worn piston cylinder causing air leakage, and clogged air filter element can also prevent the engine from starting normally.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.