What is the fuel consumption of the Venucia T70 2.0 automatic?

What is the model and specification of the Buick Excelle battery?

The model and specification of the Buick Excelle battery is 6QW60TY. The functions of the battery are: 1. To provide a strong starting current to the starter when starting the engine; 2. To assist the generator in supplying power to electrical equipment; 3. To charge the battery when the generator terminal voltage is higher than that of the battery. The Buick Excelle is a compact car under SAIC-GM Buick, with body dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, and a wheelbase of 2640mm. The Buick Excelle is equipped with a three-spoke multifunction steering wheel, an ice-blue sport instrument panel, a fully automatic air conditioning system, a one-button start function, rear air conditioning vents, a flexible 400L luggage compartment, and other systems.

1

2

Share

Where is the oil dipstick located on the BYD Song?

The oil dipstick for the BYD Song 1.5T model is located at the rear left side of the engine, while the oil dipstick for the 2.0T model is positioned on top of the engine, both featuring yellow pull rings. The hybrid version uses an electronic oil dipstick, which can be displayed on the dashboard by pressing the function button on the steering wheel. Types of engine oil: Semi-synthetic oil is one type of engine oil. It is formulated using semi-synthetic base oil, specifically Group III base oil, and is a lubricant refined from mineral oil through hydro-cracking technology. It offers slightly better performance than mineral oil and serves as an ideal transitional product between mineral oil and fully synthetic oil. Fully synthetic oil has a wider operating temperature range and a longer service life. For the same oil film requirements, synthetic oil can achieve the desired performance with lower viscosity, whereas semi-synthetic oil requires a higher viscosity to meet the same standards. Conventional mineral oil consists of base oil and additives. The base oil is the primary component of the lubricant, determining its general properties, while additives compensate for and improve the shortcomings of the base oil, providing certain new characteristics. Additives are a crucial component of lubricants.

18

5

Share

How to set the seat memory function of Mercedes-Benz e300?

The method to set the seat memory function of Mercedes-Benz e300 is: 1. Press the start button to power on the vehicle; 2. Adjust the seat to the desired position; 3. Press the M button on the side of the seat to activate the seat memory function; 4. Select and press the number key 1 or 2 as the memory key for this seat position; 5. The LCD screen on the instrument panel will display that the setting is successful. The Mercedes-Benz e300 is a mid-to-large-sized sedan under Beijing Benz, with body dimensions of 5078mm in length, 1860mm in width, and 1484mm in height, a wheelbase of 3079mm, and a body structure of a 4-door, 5-seater sedan.

18

1

Share

How to Replace the Santana's Cabin Air Filter?

Here are the steps to replace the Santana's cabin air filter: 1. Remove the outer contact cover: Unscrew the central screw of the cover with a screwdriver, then push the upper and lower edges of the cover toward the front of the vehicle to remove it. 2. Remove the cover under the steering wheel: The cover is made of black plastic and is located above the foot pedals, below the steering column. It is an irregularly shaped horizontal panel. Near the driver's side edge, there are two large round clips—rotate them 180 degrees to release. Loosen the edges of the panel and remove it entirely. 3. Open the side cover of the cabin air filter: There is a screw in the center of the cabin air filter cover. Unscrew it, then gently pry open the small clip slot below the cover and pull it outward to open. 4. Replace the cabin air filter: Pull the old filter out horizontally. Note that the cabin air filter has a specific direction—ensure it is not installed backward.

3

4

Share

What is the fuel consumption of the GL8 2.0T?

The official combined fuel consumption of the Buick GL8 2.0T is 8.5-9 (L/100km), but actual fuel consumption varies from person to person. Fuel consumption is influenced by driving habits, road conditions, weather, and other factors. The following are details about fuel consumption: Fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when driving a certain distance (100 kilometers) on the road. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is measured by manufacturers in an objective environment using a dynamometer installed on the vehicle's chassis. The measured values are converted into speed parameters, and the vehicle is then driven at specified speeds to calculate the theoretical experimental fuel consumption data per 100 kilometers. Methods to reduce fuel consumption: Avoid sudden acceleration and sudden braking while driving; make full use of the vehicle's inertia and reduce unnecessary braking; use cruise control correctly; utilize the air conditioning system efficiently; reduce the vehicle's weight by removing unnecessary items and cleaning mud from the chassis in a timely manner to lighten the load.

5

4

Share

How to Operate BMW's Automatic Parking?

BMW's automatic parking operation steps are as follows: 1. Press the parking button: Press the P button next to the gear lever, drive the car near the parking space, and press the PDC button (automatic parking button). 2. Drive slowly to find a parking space: Then drive at a speed below 40km/h. At this time, the ultrasonic sensors can effectively detect parking spaces, once a space about 1.25 meters longer than the car body is detected. 3. After braking, select the parking direction: Stop the car. For BMW's new automatic parking system, the owner can choose between parallel parking or perpendicular parking, while the old system only allows parallel parking. 4. Start automatic parking: After confirming parking, hold down the PDC button and release the brake pedal and steering wheel. The automatic parking function is activated, and the automatic parking assist system controls the car's steering, acceleration, and braking until the vehicle enters the parking space and automatically cancels.

15

3

Share

What is the fuel consumption of the Venucia T70 2.0 automatic?

What is the model and specification of the Buick Excelle battery?

Where is the oil dipstick located on the BYD Song?

How to set the seat memory function of Mercedes-Benz e300?

How to Replace the Santana's Cabin Air Filter?

What is the fuel consumption of the GL8 2.0T?

How to Operate BMW's Automatic Parking?

What does Volkswagen fault code p0343 mean?

What is the officially recommended engine oil for Volkswagen EA211?

How Often Should Chassis Maintenance Be Performed?

How to resolve the engine warning light issue in Bestune X40?