What is the fuel consumption of the Venucia M50V?

What are the common car faults?

Common car faults and their solutions: 1. Red light on the dashboard: Generally refers to the brake and water temperature indicator lights. If the brake light suddenly turns on while driving, it could be due to worn brake pads, leaking brake fluid, or low brake fluid level. In this case, stop immediately and check, then seek nearby repairs instead of continuing long-distance driving. 2. Noticeably reduced braking effect: Often manifested as the car not stopping immediately after pressing the brake pedal, but continuing to move forward for a considerable distance before stopping. This might indicate a fault in the car's braking system, which is one of the most dangerous faults while driving and can easily lead to traffic accidents. Emergency measures should be taken, usually by checking if the brake pads are worn out, if the brake fluid has deteriorated, or if the tires are severely worn. 3. Steering wheel suddenly becomes heavy: If you suddenly notice significant resistance when turning the steering wheel while driving, and the wheel doesn’t return to its original position after turning, it could be due to a flat tire on one of the front wheels. For hydraulic power steering, it might be an issue with the power steering fluid; for electric power steering, it could be a blown fuse or a short circuit in the wiring. 4. Radiator leakage: The engine requires water circulation for cooling during operation, but if the radiator leaks, stop immediately. If the leak is at the bottom, it might be from the radiator or the windshield washer fluid reservoir, and you can continue driving cautiously. However, if the leaking fluid is yellow, green, or pink antifreeze, it indicates a radiator leak, and you must call for a tow truck. Do not drive until it’s repaired. 5. Vehicle feels unstable when turning: This is often caused by a fault in the front wheel alignment. Common causes include tire repairs that disrupt the balance of the front wheels, loose parts in the drive shaft, damaged overall balance, failed shock absorbers, worn or loose steering components, or improper front wheel alignment. Identify the specific cause before proceeding with repairs. 6. Smoke from the exhaust pipe: White smoke may indicate a dirty air filter causing insufficient air intake, or issues with the carburetor or oxygen sensor. Blue smoke, often accompanied by reduced acceleration and increased noise, might suggest internal engine faults like burning oil or scratches on the cylinder walls, requiring immediate repair to avoid significant damage. Black smoke usually points to problems with the ignition system, low cylinder pressure, or poor fuel quality. Try changing the fuel source first; if the issue persists, visit a repair shop. 7. Failure to start: If your newly purchased car frequently fails to start and the battery is always found dead after checks, don’t panic. Based on experience, batteries rarely drain on their own; it’s more likely due to habits like leaving the headlights on after exiting the car or listening to the audio system while the engine is off, which drains the battery.

7

5

Share

How many questions are there in the driving license subject one test?

The driving license subject one test consists of 100 questions. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", it is divided into single-choice questions and true/false questions, with each question worth 1 point and a total score of 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the paper and end the test. Subject one, also known as the subject one theory test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test is conducted on a computer with a time limit of 45 minutes. The content of the subject one test includes: driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Notes for the subject one test: Candidates should pay attention to their attire and are not allowed to wear slippers. Electronic devices and bags are not allowed in the examination room. Bring your ID card and queue up to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in the lockers before entering the examination room. Upon entering the examination room, the identity verification station will assign a seat. After finding your seat, start the test. Ensure the camera is aligned with you and follow the test discipline. If you fail the first time, there is a retake opportunity on the same day. If you fail again, you will need to pay and reschedule. After the test, queue up to collect the score report and sign it. Failure to sign will render the test invalid. There is no limit to the number of times you can schedule the subject one test. Each subject can be taken once, and if you fail, you can retake it once. If you do not take the retake or fail the retake, the test will be terminated, and the applicant must reschedule the test. For subject two and subject three, there are only five test opportunities. Subject two and subject three tests can be scheduled ten days later. If the subject three safe and civilized driving knowledge test is failed, the previously passed road driving skill test results remain valid. There are three subjects in the driving test: subject one, subject two, and subject three. Subject one refers to the road traffic safety laws, regulations, and related knowledge test; subject two refers to the field driving skill test; subject three is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after subject three, so it is commonly referred to as subject four. However, in official terms (i.e., the Ministry of Public Security Order No. 123), there is no such thing as subject four.

11

1

Share

Does the Infiniti ESQ have four-wheel drive?

Infiniti ESQ does have four-wheel drive models. The variant equipped with a 1.6-liter turbocharged engine features four-wheel drive. The 4WD Infiniti ESQ utilizes an on-demand all-wheel-drive system with a multi-plate clutch central differential. Vehicles with this system primarily operate in two-wheel drive during normal conditions, only engaging all four wheels when encountering specific road conditions. The Infiniti ESQ is a compact SUV under Nissan Motor Company, measuring 4135mm in length, 1765mm in width, and 1565mm in height, with a wheelbase of 2530mm.

14

3

Share

What transmission does the Geely Icon use?

Geely Icon uses a 7-speed dual-clutch transmission across the entire lineup. The dual-clutch transmission is a product developed based on manual transmissions, with a structure similar to manual transmissions, but with an additional set of clutches and a gear-shifting control mechanism. The Geely Icon is a compact SUV under the Geely brand, with body dimensions of 4350mm in length, 1810mm in width, and 1615mm in height, and a wheelbase of 2640mm. It is equipped with the Zhijing 1.5TD mid-mounted direct-injection turbocharged engine, delivering a maximum power of 140KW and a peak torque of 300NM.

4

2

Share

What are the methods for controlling speed when going downhill?

Methods for controlling speed when going downhill are: 1. Shift into a low gear before descending; 2. Shift gears steadily based on normal driving. Precautions when going downhill: 1. Do not coast in neutral when going downhill; 2. Steer gently during the descent; 3. Test the braking performance before descending. Methods for controlling speed include: 1. Brake control, using the friction between brake pads and discs, and between tires and the ground to convert kinetic energy into heat; 2. Throttle control, adjusting the throttle opening and the speed of piston movement; 3. Clutch control, regulating the connection between the engine and the drive wheels.

8

3

Share

What are the reasons for inaccurate car fuel gauge readings?

The reasons for inaccurate car fuel gauge readings are: 1. Faulty fuel gauge pointer; 2. Damaged fuel level sensor; 3. Broken linkage between the fuel level sensor and float; 4. Contamination on the fuel level sensor; 5. Open circuit or poor connection in the wiring from the fuel level sensor to the ECU; 6. Poor contact or severe wear of the fuel position sensor's sliding resistor; 7. Abnormal instrument circuit or loose/aged electrical components. The solutions for inaccurate car fuel gauge readings are: 1. Regularly inspect and replace the car fuel gauge; 2. Adjust the fuel gauge using the air pressure regulation method; 3. Replace the fuel level sensor.

1

Share

What is the fuel consumption of the Venucia M50V?

What are the common car faults?

How many questions are there in the driving license subject one test?

Does the Infiniti ESQ have four-wheel drive?

What transmission does the Geely Icon use?

What are the methods for controlling speed when going downhill?

What are the reasons for inaccurate car fuel gauge readings?

What are the causes of unstable idle speed caused by the carburetor?

What Causes Piston Ring Noise?

Where are the ETC service points?

What is ETC at highway toll stations?