What is the fuel consumption of the URV?

1 Answers
TannerLee
07/24/25 5:58am
There are currently 5 models of the Honda URV available for sale. Among them, two models such as the 2020 240TURBO 2WD Zhiyue Edition are equipped with a 193-horsepower engine, with an NEDC fuel consumption of 7.2L per 100 kilometers. Three models such as the 2020 370TURBO 2WD Zunya Edition are equipped with a 272-horsepower engine, with an NEDC fuel consumption of 8.3L per 100 kilometers. The fuel tank capacity of different Honda URV models varies, and the distance that can be covered with a full tank of fuel is as follows: Models equipped with a 193-horsepower engine have a fuel tank capacity of 57L, and the distance that can be covered with a full tank is 57/7.2*100=792KM. Models equipped with a 272-horsepower engine have a fuel tank capacity of 57L, and the distance that can be covered with a full tank is 57/8.3*100=687KM. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase car fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Cars with greater weight will have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine computer controls the car to use higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
9
3
Share
More Forum Discussions

Why is the wiper noise loud?

Loud wiper noise is caused by aging of the wiper rubber strip or deformation of the wiper. In such cases, you can replace the wiper rubber strip. If the wiper is deformed, you should go to a professional 4S shop for repair by professional technicians. The wiper of the vehicle will not be damaged during normal use, and deformation of the wiper is very rare. In most cases, it is caused by aging of the rubber strip. The vehicle should also be replenished with windshield washer fluid in time, as the washer fluid can protect the wiper. If the vehicle's windshield washer fluid is missing, do not use plain water as a substitute. The wiper, also known as the windshield wiper, is mainly used to remove raindrops and dust from the windshield, improving visibility for the driver during the driving process.
3
5
Share

What does the EPC indicator light mean?

The EPC indicator light can illuminate in two scenarios: during power-on self-test and under other conditions. The power-on self-test is a pre-driving check of all vehicle sensors. Typically, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light remains on after starting the vehicle or illuminates under other conditions, the common causes include faults in the engine intake system, throttle, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other conditions: Engine intake system fault: The EPC light will alert when the engine intake is obstructed or insufficient. Throttle fault: Carbon buildup is a common issue with the throttle. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: Examples include substandard fuel, fuel deterioration, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with components like the intake valve can also cause the EPC light to illuminate. ECU control unit fault: This may involve interference with the vehicle's computer signals or false alarms from the computer. Brake light fault: Situations like non-functioning brake lights, faulty brake switches, or brake circuit issues. Solutions for when the EPC light illuminates: Troubleshoot intake system issues, use the correct fuel grade, clean the throttle, etc. Remove carbon deposits from relevant components. Re-flash ECU-related data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains off. If it does not illuminate again, there may be no issue, possibly just interference affecting the EPC indicator. If the light stays on or frequently illuminates, drive to the nearest service center for professional diagnosis and timely resolution to eliminate safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system takes predefined actions to address powertrain issues. Common EPC indicator lights usually display two colors: yellow and red. A yellow EPC fault light means the vehicle can still be driven, but proceed slowly to a repair shop. A red EPC fault light indicates a severe issue, requiring immediate stopping and contacting a technician. Continuing to drive may damage core components or compromise safety.
13
3
Share

Should an automatic transmission car be turned off in N gear or P gear?

For automatic transmission cars, it is recommended to turn off the engine in P gear. The manufacturer's suggested procedure for drivers is: directly shift to P gear, engage the parking brake, turn off the engine, and then leave the vehicle. All automatic transmission models support turning off the engine and removing the key in P gear, but some automatic transmission models cannot remove the key when in N gear. An automatic transmission is a drivetrain device that can automatically shift gears and operate based on the vehicle's speed and engine RPM. Currently, there are four common types of automatic transmissions in vehicles: hydraulic automatic transmission (AT), continuously variable transmission (CVT), automated manual transmission (AMT), and dual-clutch automatic transmission.
15
1
Share

How to shift gears in BYD Song Pro?

BYD Song Pro gear shifting method: This vehicle does not use a conventional mechanical gear lever. The gear lever can only be pushed forward or backward, and the button needs to be pressed when shifting gears before pushing forward or backward. In fact, this type of gear lever is more convenient to use. The BYD Song Pro is a compact SUV under BYD, equipped with a 1.5-liter turbocharged engine across the entire lineup. In terms of body dimensions, the BYD Song Pro measures 4650mm in length, 1860mm in width, and 1700mm in height, with a wheelbase of 2712mm. Exterior-wise, the BYD Song Pro adopts the Dragon Face 2.0 design language, incorporating dragon elements throughout the vehicle: the "Dragon Face" design appears more majestic, the "Dragon Leap" waistline adds dynamism to the body, and "Dragon Claw" elements are used for the first time in the front and rear LED headlights, featuring over 400 LED light sources.
20
3
Share

How to Turn on the High Beam Lights in a Buick Car?

Buick car high beam light activation method: The lever below the steering wheel on the left side, pushing it downward turns on the high beams. It has three directions: pushing forward activates the right turn signal, pulling backward activates the left turn signal, pushing upward quickly switches between low and high beams, and pushing downward turns on the high beams. Buick cars come with an automatic light sensing function that activates when there is insufficient light. Buick is a car brand under General Motors, founded in Detroit, Michigan, USA. Taking the Buick Excelle as an example, its body dimensions are 4515mm in length, 1725mm in width, and 1445mm in height, with a wheelbase of 2611mm. In terms of appearance, the Buick Excelle still adopts the Buick family's winged design, with a dynamic and stylish exterior.
11
4
Share

What are the components of engine oil?

Engine oil components: Engine oil consists of base oil and additives. For mineral oil, the base oil is refined from petroleum; for fully synthetic oil, the base oil is artificially synthesized. Engine oil is known as the lifeblood of the engine, serving functions such as lubrication, cleaning, sealing, heat dissipation, buffering, and rust prevention. There are three types of engine oil: fully synthetic oil, semi-synthetic oil, and mineral oil. Engine oil also contains additives that enhance its performance, with common additives including antioxidants and dispersants. Engine oil needs to be replaced regularly. If used for an extended period without replacement, the oil will oxidize and deteriorate, leading to a decline in its lubricating performance and increased engine wear.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.