What is the fuel consumption of the Trumpchi GS3?

1 Answers
MaddoxLee
07/29/25 8:46pm
The fuel consumption of the Trumpchi GS3 1.5L displacement automatic transmission version is 8.5L per 100 kilometers; the manual version consumes 7.7L per 100 kilometers; the 1.3T displacement version consumes 8.8L per 100 kilometers. The following are specific reasons for high fuel consumption in cars: Affected by temperature: Fluctuations in fuel consumption occur, especially in winter when lower temperatures lead to increased fuel consumption. Vehicle not maintained for a long time: Dirty engine oil and air filters can also cause increased fuel consumption. Dirty engine oil leads to poor lubrication, increasing resistance in the engine's moving parts, which requires more energy to overcome, resulting in higher fuel consumption. Excessive carbon buildup in the vehicle: Carbon buildup in areas such as the throttle body, fuel injectors, intake manifold, and piston tops can lead to incomplete combustion, thereby increasing fuel consumption.
Was this review help?
19
2
Share
More Forum Discussions

What are the differences between the high-end and low-end versions of the A4L?

Differences between the high-end and low-end versions of the A4L: 1. Different in terms of power: The high-end version of the A4L has a maximum horsepower of 252 hp; the low-end version has a maximum horsepower of 190 hp. 2. Different in terms of drive form: The high-end version of the A4L is front-engine four-wheel drive; the low-end A4L is front-engine front-wheel drive. The A4L is equipped with Audi's dynamic steering system, which can change the transmission ratio based on driving speed and the selected Audi driving mode, providing flexible operation at low speeds and stable operation at high speeds. It works closely with the ESP system to improve safety performance. Through the coordination of radar sensors and LED warning lights on the rearview mirror, the active safety of the vehicle during driving is enhanced.
1
3
Share

How to Use Remote Start Function

Remote start function usage method: 1. Press the lock button on the smart key once; 2. Long press the circle button in the lower left corner for 5 seconds until the car's turn signals flash to confirm startup; 3. When the engine is remotely started, the wipers, lighting, and audio system remain off while the security system stays active; 4. The engine will run for a maximum of 10 minutes. Using the same procedure can extend it by another 10 minutes. If the owner doesn't enter the vehicle within 20 minutes, the engine will automatically shut off; 5. Within the given time, when the owner unlocks the door, enters the vehicle, steps on the brake pedal, and presses the start button, the computer will activate all systems.
20
2
Share

What does the ion button in a car mean?

The ion button in a car refers to the vehicle's negative ion air purification function. When this function is activated, the negative ion generator produces and releases a large number of negative ions. Since dust, particles, and harmful substances like formaldehyde in the air easily adhere to these negative ions, they form larger particles and settle down, ultimately being filtered out by the air filter. This achieves the effect of purifying the air inside the car. In simple terms, the negative ion air purification function in a vehicle transforms tiny particles that cannot be filtered by the air filter into larger particles that can be filtered, through adsorption with negative ions, thereby achieving purification.
9
0
Share

How to reset the maintenance light on a Volkswagen Bora?

The method to reset the maintenance light on a Volkswagen Bora is as follows: 1. Turn the key to the OFF position, ensuring all dashboard lights are off; 2. Press and hold the 0.0SET button on the right side, then turn the key to the ON position while continuing to hold the 0.0SET button. The maintenance cycle indicator light will enter reset mode; 3. Release the 0.0SET button and press the button on the left side within 20 seconds. Once the indicator returns to normal status, the maintenance light will be successfully reset. The Volkswagen Bora is a self-designed model by FAW-Volkswagen, hailed as a new car that 'inherits and surpasses the classics.' Since its launch, the Bora has gained popularity among the backbone of society for its elegant and stable appearance, outstanding safety and comfort features, and excellent German manufacturing quality.
18
2
Share

What is the normal tire pressure for a car?

Car tire pressure between 2.4 to 2.5 bar is considered normal. The recommended tire pressure varies depending on the type of tire and should be adjusted based on the season, driving conditions, and vehicle load. Generally, in winter, the tire pressure can be slightly increased, while in summer, when temperatures are higher, the pressure can be reduced to prevent tire blowouts. For heavier loads, the tire pressure can be adjusted closer to the maximum recommended value. On rough roads, it's advisable to slightly lower the tire pressure according to the standard specifications. Tire pressure refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car—its failure can end the car's life—while tire pressure is like the car's blood pressure, playing a crucial role in the vehicle's performance and power.
18
1
Share

What Causes the Exhaust Fault Light to Illuminate?

Exhaust fault light illumination is caused by damage to the oxygen sensor in the three-way catalytic system or poisoning of the three-way catalytic converter. If this light comes on while driving, immediately reduce speed and proceed to the nearest service station for inspection. Below are specific details about the three-way catalytic converter: 1. Introduction: The three-way catalytic converter refers to a catalytic process that transforms harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. 2. Application: The core component of the three-way catalytic converter is a porous ceramic material installed in a specially designed exhaust pipe. It is called a 'carrier' because it does not participate in the catalytic reaction itself; instead, it is coated with a layer of precious metals such as platinum, rhodium, palladium, and rare earth coatings. It is the most important external purification device installed in a vehicle's exhaust system.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.