What is the fuel consumption of the Toyota Sienna?

Can a Scooter Exceed 60 km/h During the Break-in Period?

No problem, even during the break-in period, short periods of high speed won't have any impact on future usage. Moreover, 60 km/h can at best be considered medium-high speed (even for scooters, you can rest assured). Below is relevant information: Reason: The suggestion to try not to exceed 40 km/h during the break-in period is solely from the perspective of the engine warranty: to avoid cylinder scoring caused by high speeds during the break-in period, which could affect the brand's image. Warm-up: As long as you let the engine warm up when starting the scooter, allowing the oil to fully lubricate all components, and avoid sudden acceleration during driving or when the scooter is unloaded, occasional high speeds can actually help keep the oil and fuel passages fully clear and test the scooter's acceleration performance. Recommendation: From a safety perspective, it is recommended to develop good driving habits. From the perspective of extending the lifespan of your beloved scooter, it is recommended to develop good maintenance habits and perform timely and reasonable vehicle maintenance.

17

3

Share

What are the new regulations for motor vehicle license plates in 2021?

2021 "Motor Vehicle Registration Regulations" stipulate that for motor vehicles acquired but not yet registered, a temporary license plate valid for no more than 15 days will be issued for temporary driving within the administrative jurisdiction; for temporary driving across administrative jurisdictions, a temporary license plate valid for no more than 30 days will be issued. If the motor vehicle owner needs to apply for a temporary license plate multiple times, the vehicle management office may issue it no more than three times. Relevant details are as follows: 1. Identity proof of the motor vehicle owner: individuals must provide an ID card; non-locals must provide a temporary residence permit; military ID or household registration booklet; foreigners must provide a residence permit; organizational code certificate for unit vehicles; proof issued by embassies or foreign institutions in China; these documents must be fully consistent with the vehicle purchase invoice, and both originals and copies must be provided. 2. Proof of vehicle origin: original purchase invoice; or legally effective "Mediation Agreement," "Ruling," or "Judgment" issued by a court, along with the corresponding "Notice of Assistance in Execution" or "Arbitration Award"; or "Notarization Certificate" for inheritance, gift, or debt settlement agreement; or approval documents from the competent authority for asset restructuring or bulk asset sales; or motor vehicles purchased through auction; or auction invoice; or "Confiscation Certificate of Smuggled Cars and Motorcycles" issued by law enforcement. 3. Motor vehicle product qualification certificate: domestic motor vehicles must provide the whole vehicle factory qualification certificate; or imported motor vehicles must provide the "Goods Import Certificate" and "Notification of Entry/Exit (Registration/Deregistration) of Customs-Supervised Vehicles." Imported motor vehicles must also pass online verification, domestic vehicles must undergo theft verification, and vehicles produced after January 1, 2011, must include original factory photos and VIN frame imprint numbers.

20

1

Share

What lights to use when turning at an intersection?

Turn on the left turn signal. When a vehicle going straight is about to enter the turning intersection, it should start signaling and then make the turn. The left turn signal should be activated in advance when turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn. The right turn signal should be activated in advance when turning right, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside. The turn signal can be turned off after completing the turn and driving straight for a short distance. Generally, the turn signal will automatically turn off after the turn is completed. Below is relevant information: Night driving: When driving at night and turning at an intersection controlled by traffic lights, use the low beam. When passing through an intersection without traffic lights, alternately use the high and low beams to signal. No directional signal lights: At intersections without directional signal lights, turning vehicles must yield to vehicles going straight and pedestrians. Right-turning vehicles from the opposite direction must yield to left-turning vehicles.

20

1

Share

How many points are deducted for driving in the wrong lane and going against traffic at an intersection?

For the illegal act of driving against traffic, 3 points are deducted for driving against traffic on urban roads, and 12 points are deducted for driving against traffic on highways. There is no penalty of deducting 6 points for driving against traffic. If a driver is deducted 6 points for driving against traffic, it is likely that the driver committed two illegal acts, such as making a U-turn from a side road to the main road and driving against traffic, in which case these two illegal acts result in a deduction of 6 points. Below is relevant information according to the "Road Traffic Safety Law": Article 90: If a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic rules, a warning or a fine shall be imposed. If this Law provides otherwise, the penalty shall be imposed in accordance with the relevant provisions. Avoid driving in the wrong lane: Slow down before entering an intersection, observe the nearby signs or markings, and clearly understand the direction of each lane at the upcoming intersection in advance. If using a navigation system, pay attention to the navigation instructions when approaching the intersection.

18

4

Share

How many kilometers can a scooter motorcycle run continuously?

Motorcycle continuous driving mileage varies depending on the engine type and the vehicle's displacement. Motorcycles with a displacement of more than 150 milliliters and a water-cooled engine can run continuously for about 200 kilometers; for underbone motorcycles with a displacement of about 110 milliliters or cross motorcycles with a displacement of about 125 milliliters, due to heat attenuation issues, it is recommended not to exceed 100 kilometers of continuous driving; due to poor heat dissipation, it is not recommended for scooter motorcycles to run continuously for more than 50 kilometers. The following is relevant information: Motorcycle service life: The service life and continuous running mileage of a motorcycle are closely related to its design. Relevant data show that the service life of a brand-new motorcycle tire is about 50,000 kilometers, while the service life of the engine is about 100,000 kilometers. Safety precautions: During the use of the motorcycle, vehicle maintenance should be done well to minimize high-intensity continuous operation and avoid excessive wear and tear on the vehicle. When driving continuously for a long time, it is also necessary to consider the body's endurance, which is not only responsible for oneself but also for others.

5

Share

What Happens If the Valve Clearance of a Scooter is Too Large or Too Small?

The intake and exhaust valve clearance of a motorcycle is approximately 0.05 millimeters. When the engine is running, the valves will expand due to the increase in temperature. If there is no gap or the gap is too small between the valve and its transmission components in a cold state, the thermal expansion of the valve and its transmission components in a hot state will inevitably cause the valve to close improperly, resulting in air leakage during the compression and power strokes of the engine. This leads to a decrease in power and, in severe cases, even difficulty in starting. The valve will expand due to the increase in temperature. If there is no gap or the gap is too small between the valve and its transmission components in a cold state, the thermal expansion of the valve and its transmission components in a hot state will inevitably cause the valve to close improperly, resulting in air leakage during the compression and power strokes of the engine. This leads to a decrease in power and, in severe cases, even difficulty in starting. To eliminate this phenomenon, a certain gap is usually left in the valve and its transmission mechanism during cold assembly of the engine to compensate for the expansion of the valve after heating. This gap is called the valve clearance. Here is additional information about the intake and exhaust valve clearance of a motorcycle: The standard for the intake and exhaust valve clearance of a motorcycle is not fixed, as it varies from one motorcycle to another. The size of the intake and exhaust valve clearance may be the same or different. Since the valve train operates at high speed and high temperature, components such as the valve tappet and valve stem will elongate when heated, automatically pushing the valve open. This causes the valve and valve seat to close improperly, resulting in air leakage.

17

5

Share

What is the fuel consumption of the Toyota Sienna?

Can a Scooter Exceed 60 km/h During the Break-in Period?

What are the new regulations for motor vehicle license plates in 2021?

What lights to use when turning at an intersection?

How many points are deducted for driving in the wrong lane and going against traffic at an intersection?

How many kilometers can a scooter motorcycle run continuously?

What Happens If the Valve Clearance of a Scooter is Too Large or Too Small?

Can the Vehicle Management Office Handle Traffic Violation Points Deduction?

Must the cancellation of the Subject 4 exam be done in person?

Can WiFi be installed in a car?

Can You Park on the Side of the Road?