What is the fuel consumption of the Toyota C-HR?

2 Answers
Rodney
07/23/25 8:08pm
Toyota C-HR's official combined fuel consumption is 5.7L/100km, while its actual fuel consumption is approximately 7L/100km. Here are the relevant details: 1. Powertrain: The Toyota C-HR is equipped with a 2.0-liter naturally aspirated engine, delivering a maximum power of 126kW (171PS) and peak torque of 203N·m. It features a new-generation Direct-Shift-CVT transmission with gear drive mechanism that can simulate 10 speeds. 2. Features: The Toyota C-HR comes standard with Vehicle Stability Control, Tire Pressure Monitoring, Hill Start Assist, 10 airbags, ISO-FIX seat anchors, etc. Additionally, the Lead trim and above are equipped with a rearview camera, while the Luxury and Flagship trims feature front and rear parking sensors (8 in total).
Was this review help?
6
2
Share
DiJuliet
08/10/25 6:06pm
I'm quite interested in the fuel consumption of the Toyota C-HR. I usually drive it to and from work, using the 1.2-liter turbocharged engine version. The official data states that its WLTP test fuel consumption is approximately 6.5 to 7.2 liters per 100 kilometers. In actual city driving conditions, it might rise to over 7 liters, while on the highway, it can drop below 6 liters. The hybrid version is even more fuel-efficient, averaging around 4.5 liters. The key factor is that driving habits have a significant impact. If I brake suddenly or use the air conditioning too much, the fuel consumption noticeably increases, sometimes by more than 1 liter. To save fuel, it's best to drive steadily, avoid rapid acceleration, and perform regular maintenance like cleaning the air filter and maintaining proper tire pressure, which helps with long-term fuel efficiency. This car is quite balanced among small SUVs, especially the hybrid version, which is ideal for urban commuting.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

Where is the battery located in the Mercedes-Benz GLK300?

The battery of the Mercedes-Benz GLK300 is located on the right side of the engine compartment. You need to remove the engine cover to see the vehicle's battery. The Mercedes-Benz GLK300 is equipped with the TST-6-speed oil-cooled dual-clutch automatic transmission system, Inkanet-3G digital intelligent network driving system, Start-Stop digital intelligent start-stop energy-saving system, EPB digital intelligent electronic parking system, and Configurable color-customizable digital instrument system. Its superior powertrain and safety configurations ensure the driver's safety. Turn off all lights before shutting down the engine: Some older models do not support automatic power-off after the engine is turned off, so you need to manually turn off the headlights and interior reading lights before shutting down the engine. If you need to find something in the car or require lighting, you can use a mobile phone or flashlight for illumination, to avoid forgetting to turn off the reading light and causing battery drain. Turn off the air conditioning and audio system before shutting down the engine: The air conditioning system involves the compressor and blower, and the audio system is also a high-power electrical device. If not turned off before shutting down the engine, they will automatically start the next time the vehicle is turned on, placing a heavy burden on the battery and causing damage. Especially for music enthusiasts who have modified their car's audio system, the usual power consumption increases, and the impact on the battery during startup is even greater. Therefore, whether it's a temporary stop or a long-term parking, always turn off the air conditioning and audio system before shutting down the engine.
4
1
Share

How to Turn on the Heater in Nissan Sylphy?

If the A/C indicator light is on, press the "A/C button" to turn off the cooling function. Rotate the temperature control dial to the red zone (the temperature adjustment range is 18~32°C). Set your desired temperature, but avoid setting it lower than the outside temperature, as this may prevent proper temperature control. Adjust the fan speed switch to your preferred airflow intensity. Additional reference materials: 1. Internal vs. External Air Circulation: Choose between internal and external air circulation based on driving conditions. Use external circulation in areas with good air quality and internal circulation in poor air conditions. External circulation ensures better airflow, while internal circulation provides better heat retention. However, prolonged use of internal circulation may cause window fogging. If windows fog up, use the defroster instead of relying on the heater with the A/C off. 2. Cold Engine Startup: Avoid turning on the heater immediately after a cold start. Some drivers habitually activate the heater right after starting the engine, which accelerates wear. In winter, when the engine is cold, the coolant temperature remains low, and turning on the heater won't warm the cabin quickly—it instead delays engine warm-up and drains the battery. The correct method is to warm up the engine first. Wait until the coolant temperature gauge reaches the midpoint, then turn on the heater. Set the A/C to external circulation for 2-3 minutes to refresh cabin air before switching to internal circulation. Additionally, using engine radiator heat reduces fuel consumption.
20
5
Share

What is the automotive maintenance process?

Automotive maintenance process mainly includes: 1. Engine oil level check. When the vehicle is on a level surface, if the oil level is between the F and L marks, it is normal. If it is below L, add the specified type of engine oil, ensuring the oil level does not exceed F. 2. Battery maintenance check. Mainly check if the battery is secure. If the electrolyte level is near the lower line between the upper and lower lines, replenish the electrolyte promptly. Ensure the battery's positive and negative cables have good contact and keep the battery clean and dry. 3. Air filter inspection. A dirty air filter can cause poor engine performance, increased fuel consumption, and engine damage. When inspecting the air filter, if minimal dust and light clogging are found, clean it with high-pressure air from the inside out for continued use. A heavily dirty air filter should be replaced immediately. 4. Spark plug inspection. A normal spark plug has intact insulation ceramic with no leakage. The spark plug gap should be 0.8±0.0mm, producing a strong blue spark during discharge. If abnormalities are found, adjust the gap or replace the spark plug. 5. Fuel filter inspection. If fuel supply is poor, check if the fuel filter is clogged. Replace if obstructed by debris. 6. Tire inspection. Check tire pressure monthly at normal temperature. If below the standard, replenish promptly. Pressure should not be too high or too low, as it affects driving safety. Replace tires immediately if cracks are found. When selecting tires, ensure the model is consistent.
20
0
Share

How Many Cylinders Does a Motorcycle Need to Ride on the Highway?

Motorcycles with an engine displacement of 50cc or more are allowed on highways. Here is an introduction to the classification of motorcycles: 1. Sports motorcycles: Also known as sports bikes, these are designed primarily for leisure and vacation use, serving as a fun means of transportation and a recreational tool to experience the joys of life. 2. Road motorcycles: These are motorcycles mainly used on paved roads. 3. Superbikes: While regular motorcycles emphasize riding comfort and ease of handling, superbikes prioritize high-speed performance. Riding such motorcycles allows riders to fully experience the thrill and excitement of the engine, tires, and changing road conditions.
4
5
Share

What does the red circle sign indicate?

The red circle indicates: a no-entry traffic sign. Relevant information about prohibition signs is as follows: 1. Prohibition scope: Prohibition signs are a major category of traffic signs that impose restrictions or prohibitions on vehicles, such as no entry, no parking, no left turns, no honking, speed limits, weight limits, etc. 2. Color and shape: With few exceptions, prohibition signs feature a white background, red circle, red bar, and black symbols with the symbol overlaid on the bar. These signs come in circular, octagonal, or downward-pointing equilateral triangle shapes. There are currently 42 types of prohibition signs.
2
4
Share

What are the reasons for insufficient power and slow speed in motorcycles?

Insufficient power and slow speed in motorcycles are usually caused by damaged cylinder head gaskets leading to air leakage, or throttle levers failing to return to position after being opened. Below are extended methods for inspecting and repairing motorcycles with insufficient power: 1. Check the air filter: Mainly inspect whether the filter element is clean. If it is covered with dust, wash it with soapy water, dry it, and reinstall it. 2. Check whether the cylinder pressure is normal: Unscrew the spark plug, press your thumb firmly over the spark plug hole, and then step on the kick starter. If you cannot hold the pressure, it is normal. If no air is expelled when pressed, there is air leakage in the cylinder or combustion chamber.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.