What is the fuel consumption of the Tiguan?

1 Answers
MilesRose
07/30/25 7:50am
Volkswagen Tiguan's fuel consumption ranges from 6.9 to 8.6L/100km. Here are more details about the Volkswagen Tiguan: 1. Body dimensions: The length, width, and height of the Volkswagen Tiguan are 4506mm, 1809mm, and 1685mm respectively, with a wheelbase of 2684mm. 2. Powertrain: The Tiguan is equipped with two engines: 1.8TSI and 2.0TSI. The 2.0TSI engine can deliver a maximum power of 147kW and a maximum torque of 280Nm, while the 1.8TSI engine can reach a peak torque of 250Nm at 1500rpm.
Was this review help?
4
5
Share
More Forum Discussions

What is the horsepower of the Changan CX20?

Changan CX20 horsepower: 86 horsepower for the 1.3L model and 101 horsepower for the 1.4L model. More information about the Changan CX20 is as follows: 1. The Changan CX20 is a compact car under the Changan brand, equipped with two engines: a 1.3-liter naturally aspirated engine and a 1.4-liter naturally aspirated engine. 2. The 1.3-liter naturally aspirated engine has a maximum torque of 110 Nm, with a maximum power output at 6000 rpm and a maximum torque range between 3000 to 4000 rpm. 3. The 1.4-liter naturally aspirated engine delivers 101 horsepower and a maximum torque of 131 Nm, featuring multi-point fuel injection technology and an aluminum alloy cylinder head and block.
19
1
Share

What to Do If the Vehicle Annual Inspection Sticker Is Lost?

If the vehicle annual inspection sticker is lost, you should apply for a replacement of the vehicle inspection compliance mark. The process for replacing the vehicle inspection compliance mark is as follows: 1. Emission Test: Mainly involves verifying whether the engine number matches the vehicle registration certificate, conducting a simple check of the exterior and vehicle condition, and then filling out the emission test form. 2. Violation Query: Collect and fill out the 'Motor Vehicle Periodic Inspection Registration Form' at the window, submit the completed form to the staff to check for any violation records. If there are no issues, the form will be stamped with 'Verified'. 3. Exterior Inspection: This check mainly examines whether the car lights are damaged, whether the exterior of the vehicle conforms to its original state, whether the suspension has been altered, as well as the sunroof, tires, etc. 4. On-Road Test: Primarily involves testing the brakes, headlights (high beam), chassis, and other components. 5. Payment and Collection of Sticker: Once the general inspection is approved, pay the relevant fees at each window, and then you can collect the 'Motor Vehicle Inspection Compliance Mark'.
10
4
Share

What is the inspection cycle for motor vehicles?

Motor vehicle inspection cycles vary depending on the situation: 1. Non-operational small passenger vehicles: Inspection every two years for the first 6 years, then annually from the 7th to the 15th year; 2. Non-operational medium and large passenger vehicles and trucks: Annual inspection for the first 10 years, then every six months from the 11th year; 3. Operational vehicles: Annual inspection for the first 5 years, then every six months from the 6th year; 4. Motorcycles: Inspection every two years for the first 4 years, then annually from the 5th year. Preparation required before motor vehicle inspection includes: 1. Checking the insurance policy for any errors; 2. Clearing traffic violations at the traffic department; 3. Fire extinguisher and parking sign.
19
5
Share

What are the consequences of having 12 points deducted from a C1 license?

The consequences of having 12 points deducted from a C1 license include: 1. The motor vehicle driver's license will be suspended and cannot be used; 2. It will require time to participate in additional learning and tests. The C1 driver's license is one of the license codes, permitting the driving of small and micro passenger vehicles, light and micro cargo vehicles, and light, small, and micro special operation vehicles. The application requirements for a C1 driver's license are: 1. Age between 18 and 50; 2. Height above 155 cm; 3. Normal vision, without red-green color blindness; 4. Normal hearing; 5. Normal limb movement; 6. No diseases that hinder safe driving. The examination subjects for a C1 driver's license include traffic regulations and related knowledge, field driving, road driving, and safety and civilized driving common sense.
17
2
Share

Can the black area be used to stick ETC?

The black area cannot be used to stick ETC. Because ETC consumes power during use, there is a solar panel on the back of the ETC that charges it. If installed in the black area, the solar panel cannot receive sunlight, and the ETC will not function properly. ETC installation position: For small vehicles such as cars and minivans, the ETC card and OBU device are installed in the upper middle part of the front windshield. For large vehicles such as trucks and buses, the installation position is in the lower middle part. ETC installation requirements: the height should not be less than 1.2 meters or more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). ETC installation method: Sensor installation. ETC devices are uniformly installed on the inside of the front windshield of the car, next to the rearview mirror. They come with plastic suction cups to stick to the front windshield. Choose an installation position that does not affect the front driving view. Installation of the sensor wiring harness. Plug the wiring harness connector of the sensor into the sensor's connection port. The wiring harness is connected through the vehicle's internal network, and it is separated from the vehicle's intelligent information system. The wiring harness is wrapped along the interior roof panel without the need to dismantle the interior trim—just press it by hand to hide the wiring neatly. Insert the card into the ETC sensor. Gently insert the side of the card with the chip into the card slot of the ETC sensor. The sensor detects the chip and reads the express card. If the card is inserted correctly, the sensor's display will light up and show the message "Start billing," indicating that the sensor is properly connected to the express card.
3
0
Share

Can someone else handle the car transfer if the owner cannot go in person?

Car transfer can be handled by someone else if the owner cannot go in person, but the owner needs to write a personal power of attorney. The power of attorney should include a copy of the owner's ID card and signature, authorizing the representative to handle the relevant matters on behalf of the owner. Then, the representative needs to bring the original ID card of the owner, the original ID card of the representative, and other required transfer procedures. The documents that the seller needs to prepare for the representative include: 1. The vehicle's motor vehicle registration certificate and a copy; 2. The original vehicle license and a copy; 3. The vehicle; 4. One standard photo of the motor vehicle; 5. The original motor vehicle inspection record form. Car transfer refers to changing the name of the vehicle's owner.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.