What is the fuel consumption of the Tiggo 5?

What is the Chinese name for the Macan?

The Chinese name for the Porsche Macan is Maikai. The Porsche Macan is positioned as a mid-size SUV, built on the Audi Q5 platform, with body dimensions of 4681mm in length, 1923mm in width, and 1624mm in height, and a wheelbase of 2807mm. In terms of the powertrain, the Porsche Macan is equipped with a range of engines including a 2.0T, a 3.0T V6, and a 3.6T V6. The 2.0-liter turbocharged engine delivers a maximum output of 235 horsepower, the 3.0-liter V6 twin-turbocharged engine produces up to 340 horsepower, and the 3.6-liter V6 twin-turbocharged engine generates a maximum output of 395 horsepower. The Porsche Macan SUV series comes with three Michelin tire options: the Michelin Latitude Sport 3 summer tires, the Michelin Latitude Alpin 2 winter tires, and the Michelin Latitude Tour HP all-season tires. For the interior, the dashboard features the latest generation Porsche Communication Management system with a 10.9-inch high-definition display that supports full connectivity. The car is also equipped with an air-purifying ion filter and a sporty three-spoke steering wheel.

14

1

Share

What is the transmission oil model for Audi A6?

Audi A6 transmission oil is the dedicated CVT transmission oil for Audi, with the model number LGA052180A2. The Audi A6 CVT transmission oil is generally recommended to be replaced every 2 years or approximately 40,000 kilometers. Different models have different replacement cycles. Below are the replacement cycles for transmission oil: Manual transmission: Manual transmission oil is generally recommended to be replaced every 3 years or approximately 100,000 kilometers. Automatic transmission: Automatic transmission oil is generally recommended to be replaced every 2 years or approximately 40,000 kilometers. Continuously variable transmission (CVT): CVT transmission oil is generally recommended to be replaced every 2 years or approximately 60,000 kilometers. The methods for replacing transmission oil are as follows: Unscrew the drain plug at the bottom of the transmission to drain the oil before refilling. Remove the transmission oil pan directly to drain and refill the oil: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. Use a circulation machine to replace automatic transmission oil: A smart circulation machine can dynamically replace the oil, filtering and cleaning sludge and impurities inside the automatic transmission.

15

1

Share

Does adding 95 octane gasoline to half a tank of 92 octane have any impact?

There is a certain impact when adding 95 octane gasoline to a half tank of 92 octane gasoline. Occasionally adding the wrong gasoline grade only requires switching back to the correct grade after use, but long-term use of the wrong gasoline grade should be avoided. Long-term use of the wrong gasoline grade can have the following effects: For vehicles designed for lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in a noticeable drop in performance. For vehicles designed for higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane rating is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without significant damage to the engine. However, if severe knocking occurs, it indicates serious engine issues, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. Hazards of using the wrong fuel: Using higher octane fuel in a vehicle designed for lower octane fuel: The car may experience reduced power and higher fuel consumption, but as long as it is not used long-term, it will not cause significant damage. Conversely, using lower octane fuel in a vehicle designed for higher octane fuel generally has no impact. Adding gasoline to a diesel vehicle: The car may start, but due to incomplete combustion of gasoline, it will become increasingly sluggish while driving, leading to power loss, shaking, and white smoke. In such cases, the fuel system must be thoroughly cleaned. Adding diesel to a gasoline vehicle: The vehicle will fail to start. Diesel has a lower ignition point, and while gasoline requires spark ignition, diesel ignites under compression. The ignition system will directly ignite the diesel, causing knocking, engine damage, black smoke, vehicle shaking, and failure to start. In severe cases, the engine may be damaged. In such situations, contact a repair shop to clean the fuel system.

18

0

Share

Why is the Hino 700 engine malfunction indicator light on?

The engine malfunction indicator light may illuminate due to the following 7 main reasons: Sensor failure: This includes sensors such as coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the malfunction indicator light. Fuel/oil quality issues: Failure to use the manufacturer-recommended fuel and engine oil may cause engine wear, leading to the illumination of the malfunction light. Poor fuel mixture combustion: This can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will activate as a warning. Causes include spark plug failure, ignition coil malfunction, fuel pump issues, or fuel line blockage. Turbocharging problems: Issues with the intake boost system or turbocharger can trigger the light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, power loss, metallic noises, or blue/black exhaust smoke. Intake system problems: Air intake issues may lead to engine pipe blockages, potentially triggering the light. A dirty air filter that hasn't been regularly cleaned can cause intake problems. Exhaust system faults: These can also activate the light. Common causes include rear oxygen sensor failure, catalytic converter issues (most frequent), or exhaust camshaft/bearing problems. Leaded gasoline, improper lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions often cause catalytic converter failure. Anti-theft system malfunction: If the electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the malfunction light. When the engine malfunction light illuminates, follow these steps: First check if the engine operates normally. If there's shaking, black smoke, etc., avoid restarting. Never restart if the red warning light is on. If the engine starts, turn it off for 5-10 minutes. Then without pressing brakes (or clutch for manual transmissions), activate the ignition to ON position to initiate self-diagnosis. After 5-10 seconds, check if the light turns off. If the light remains on, visit a service center immediately. Technicians can use diagnostic tools to read trouble codes and perform targeted repairs.

20

4

Share

What tires are used on the Haval H6?

Haval H6 uses Cooper tires, with five available tire sizes: 225/65/R17, 235/55/R19, 225/55/R19, 225/60/R18, and 235/60/R18. Cooper Tires is the second-largest tire manufacturing company in North America, with a business scope covering tire design, production, and sales of tires for passenger cars, light trucks, medium trucks, motorcycles, and racing vehicles. For the Haval H6's tires, the following points should be noted during daily use: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallower. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may also pose a hidden risk of tire blowouts during high-speed driving. Additionally, promptly remove pebbles lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should avoid turning the steering wheel, as this action accelerates tire wear. Do not splash water to cool overheated tires. In hot weather or during high-speed driving, tires are prone to overheating, and tire pressure may increase. In such cases, park to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and hard braking to prevent accelerated tread wear caused by dragging between the tires and the road surface.

17

0

Share

Why does the car key remote control fail after replacing the battery?

There are many reasons for the failure of the remote control key. One situation is that the battery is dead or the battery contact is poor; the second situation is that the time control module in the remote control key fails, which will also cause the remote control to not work; the third situation is due to the aging of the antenna of the remote control transmitter on the car, which can also cause this situation. Solution: In this case, you can go to the repair station for inspection and repair. In addition, after some cars have anti-explosion sun film applied to the front windshield, when remotely unlocking the car from the front, the remote door lock may also not respond. This is because this anti-explosion sun film shields the remote control signal to a certain extent. The reasons why the car key remote control fails after replacing the battery are as follows: If the remote control key fails, it needs to be re-matched after replacing the battery. Insert the remote control key, turn it to the "II" position, and then quickly reset it to the "0" position. Repeat this four times, then quickly pull out the key. Press any button, such as the unlock button, for 4-5 seconds, and you will hear a "click" sound inside the car. The key encoding is completed. Smart Key: This type of smart key can emit infrared signals, which can unlock one or two doors, the trunk, and the fuel filler cap, and can also operate the car's windows and sunroof. More advanced smart keys resemble a credit card. When the driver touches the door handle, the central lock control system starts working and emits a wireless query signal. After the smart key card responds accurately, the car lock automatically opens. The engine will only start when the central processor detects that the key card is inside the car. RFID (Radio Frequency Identification) Technology: This system uses RFID (Radio Frequency Identification) technology. Under normal circumstances, when the car owner approaches the vehicle within about one meter, the door lock will automatically open and the anti-theft system will be deactivated; when leaving the vehicle, the door lock will automatically lock and enter the anti-theft state. When the car owner enters the vehicle, the in-car inspection system will immediately recognize the smart card. At this time, simply press the start button (or knob) slowly to start the vehicle normally. Throughout the entire process, the car key does not need to be taken out. Car Smart Keyless Entry System: The car smart keyless entry system, abbreviated as PKE (PASSIVE KEYLESS ENTER), uses the world's most advanced RFID wireless radio frequency technology and the most advanced vehicle identity coding recognition system. It is the first to apply a miniaturized, low-power RF antenna development solution and successfully integrates the remote control system and the keyless system, following the traditional vehicle circuit protection. It truly achieves a dual RF system and dual anti-theft protection, providing car owners with the utmost convenience and safety.

2

4

Share

What is the fuel consumption of the Tiggo 5?

What is the Chinese name for the Macan?

What is the transmission oil model for Audi A6?

Does adding 95 octane gasoline to half a tank of 92 octane have any impact?

Why is the Hino 700 engine malfunction indicator light on?

What tires are used on the Haval H6?

Why does the car key remote control fail after replacing the battery?

Where is the OBD interface of the Envision?

How Many Years is the Baojun 360 Exempt from Inspection?

What is the Scrap Life of Honda CRV?

Where is the air filter for BMW 730?