···
Log in / Register

What is the fuel consumption of the Tiggo 3 manual transmission?

4 Answers
JaxsonLee
09/07/25 8:09am

Tiggo 3 owners report an average fuel consumption of 7.6L/100km, while the official MIIT combined fuel consumption is 7.3L/100km. Below is an introduction to fuel consumption: Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. Testing Method: The test can be conducted on the road or on a chassis dynamometer, and the fuel consumption per 100 kilometers is then calculated using the flow meter method or carbon balance method. Additional Information: The Tiggo 3 is available in two powertrain variants, equipped with 1.5L and 1.6L engines respectively. The 1.6L engine delivers a maximum power of 93kW and a maximum torque of 160Nm.

Was this review help?
12
3
Share
Edmund
09/19/25 7:13am

I've been driving a Tiggo 3 manual transmission for over two years now, and the fuel consumption has been quite reasonable overall. In city driving with frequent stops and starts, it's around 9 liters per 100 kilometers; on the highway, it's more fuel-efficient, dropping to about 7.5 liters. Combined, the official data suggests an average between 8.5 and 9 liters, but I think driving habits play a big role. For example, avoiding aggressive acceleration and sudden braking, and getting into the habit of gentle acceleration can keep fuel consumption around 8 liters. Load also affects it—having a full backseat or a heavily loaded trunk can increase consumption by over 1 liter. Regular maintenance is also crucial, like changing the air filter and using the right engine oil to keep the engine running smoothly. Overall, this car's fuel consumption isn't high, and it's more economical than many manual transmission SUVs in its class. A full tank can easily cover over 600 kilometers, making it very cost-effective for daily commuting.

Was this review help?
15
1
Share
Expand All
AryaAnn
11/02/25 7:36am

As a car enthusiast, I must say the fuel consumption performance of the Tiggo 3 manual transmission is quite solid. The 1.6L naturally aspirated engine paired with a manual gearbox delivers a combined fuel consumption of around 8.5 to 9 liters per 100 kilometers. In city traffic with congestion, it may approach 10 liters, while maintaining a steady speed on the highway can bring it down to just over 7 liters. There are numerous factors affecting fuel consumption. The engine design optimizes the fuel injection system, but road conditions play a significant role – climbing hills or driving on mountain roads will increase consumption. Vehicle weight also pushes up fuel usage; running empty saves a considerable amount of fuel compared to a full load. In terms of maintenance, regular checks on spark plugs and tire pressure, ensuring proper tire inflation, can reduce unnecessary fuel wastage. Comparatively, driving a manual transmission well makes it easier to control fuel consumption than an automatic. For instance, mastering shift timing and avoiding low-speed high-gear driving can keep consumption around 8 liters. After driving this model, I find it quite balanced – with reasonable and economical fuel consumption, long-distance travel doesn’t come with worries about soaring fuel costs.

Was this review help?
14
1
Share
Expand All
DiAddyson
12/16/25 7:40am

The fuel consumption of the Tiggo 3 manual transmission is approximately 8.5 to 9 liters per 100 kilometers under combined conditions. It tends to be higher in city driving, reaching nearly 9.5 liters, while on highways, it drops to around 7 liters. Fuel-saving driving techniques include smooth acceleration, avoiding frequent speeding up and braking, and shifting gears at appropriate RPMs. Road conditions also play a crucial role, with flat roads being more fuel-efficient than uphill driving. Timely maintenance, such as replacing the air filter, can help stabilize fuel consumption at around 8 liters. There may be slight variations in fuel consumption depending on the model, but the basic data is reliable and practical.

Was this review help?
14
5
Share
Expand All
More Forum Discussions

Can China 5 Vehicles Use China 6 Engine Oil?

China 6-compatible engine oil is suitable for China 5 vehicles, as new products can be backward compatible, except for special specification oils. However, it is important to ensure that the viscosity of the new oil is appropriate for your vehicle model. Vehicle Classification: Vehicles are classified into levels one to seven based on their emissions. This standard is what car manufacturers must meet when producing vehicles, referring to the proportion of harmful gases in the exhaust emissions after engine combustion. While it is somewhat related to the quality of gasoline, the core factor remains the vehicle's technical level. Engine Oil: Engine oil, also known as motor lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and cushion shocks in the engine. Engine oil consists of two parts: base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while additives compensate for and improve any deficiencies in the base oil's performance, providing new characteristics and being an essential part of the lubricant.
2
1
Share

Where is the air conditioning filter for the Enclave?

The air conditioning filter for the Enclave is located behind the glove compartment on the passenger side. You can see it by removing the glove compartment. The air conditioning filter in a car can filter out impurities from the air conditioning system, as well as some harmful gases, playing a role in purifying the air. It also helps eliminate odors produced by the air conditioning system. It can be said that the air conditioning filter is a crucial component of the air conditioning system. The Enclave is the first model from General Motors' new Lambda platform, equipped with a 3.6L V6 engine and a 6-speed automatic transmission. In terms of dimensions, the Enclave measures 5118mm in length, 2007mm in width, and 1842mm in height.
4
0
Share

How to Use Engine Heat for Warming?

Using engine heat for warming is done by turning on the heating function of the air conditioning system, which utilizes the heat generated by the engine. The heating principle of a car's air conditioning system relies on the engine's heat. When the air conditioning is set to heat, the high-temperature coolant from the engine flows through the heater core. At the same time, the air blown by the fan also passes through the heater core, allowing the air conditioning vents to blow warm air. Instructions for using the car's air conditioning heating: The heater core is essentially a heat exchanger. It is recommended that drivers avoid turning on the heating immediately after starting the engine, as the vents will initially blow cold air, and doing so can hinder the engine from warming up quickly. After driving normally for 10 to 20 minutes, the heating can be turned on. If the heating is activated right after starting the engine, it will slow down the engine's warming process and increase fuel consumption.
16
3
Share

Where is the engine number of Chery Tiggo 5 located?

The engine number of Chery Tiggo 5 is located on the engine block, while the chassis number is stamped on the right side of the front compartment drain channel and on the instrument panel near the windshield. The vehicle's product label is fixed on the sheet metal of the front compartment drain channel. As the production version of Chery's concept car, the Chery Tiggo 5 is the second model produced on Chery's T1X platform. In terms of power, the Chery Tiggo 5 is equipped with a 1.5T engine model SQRE4T15, with a maximum power output of 112kW (152PS). It is paired with either a 7-speed manual or a 7-speed dual-clutch transmission.
12
3
Share

What Causes the Rear Door to Not Open?

The reason the rear door cannot be opened is that the child lock is engaged. It is recommended to check whether the small lever on the side of the right rear door is activated. Car Child Lock: The car child lock, also known as the child safety door lock, is located on the rear door lock. When opened, there is a small lever (safety mechanism) below the door lock. Pushing it toward the end with the child icon and then closing the door will prevent the door from being opened from the inside, allowing it to be opened only from the outside. Car Door: The car door provides access for the driver and passengers, isolates external interference, and to some extent mitigates side impacts, protecting the occupants. The quality of a car door is mainly reflected in its anti-collision performance, sealing performance, ease of opening and closing, and of course, other functional indicators.
20
5
Share

What Octane Rating of Gasoline Should Be Used for a Compression Ratio of 9.5?

A compression ratio of 9.5 should use 95 octane gasoline. For engines with a compression ratio between 8.5 and 9.0, 95 octane gasoline is recommended. If the compression ratio is higher, a higher octane rating gasoline should be used. The compression ratio of an engine refers to the degree of gas compression, which is the ratio of the volume of gas before compression to the volume after compression. Generally, gasoline engines have a compression ratio between 6 and 10, while diesel engines typically have a compression ratio between 16 and 22. If an engine has a high compression ratio, the temperature that the gasoline-air mixture can reach after compression is also higher, resulting in greater energy release during operation and higher power output. Conversely, if the engine has a low compression ratio, the temperature that the mixture can reach after compression is lower, leading to less power output and smaller energy release, thus requiring a lower octane rating of gasoline.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.