What is the fuel consumption of the Tianjin 6-cylinder 210 horsepower model?

1 Answers
LaStephen
08/27/25 5:09am
The fuel consumption per 100 kilometers for this vehicle is 17 liters. Fuel consumption is not only related to the vehicle itself but also to the driver's driving habits and road conditions. If driving habits are poor and the vehicle is frequently driven on roads with heavy traffic congestion, the fuel consumption will inevitably be relatively high. Here is some extended information: 1. When the vehicle starts from a stationary state: A significant amount of kinetic energy is required, and the engine needs to output a substantial amount of power. If the vehicle frequently stops and starts, the fuel consumption will certainly increase. Additionally, when driving on congested roads, the engine spends a portion of its time in an idle state. 2. When the engine is in an idle state: The driving distance does not increase, but the engine continues to consume fuel, which will result in higher fuel consumption per 100 kilometers.
Was this review help?
20
4
Share
More Forum Discussions

What is the reason for the small light not turning off?

The reason the small light does not turn off is that the turn signal was not reset when the engine was turned off. The functions of the small light include: 1. Making the vehicle more easily identifiable during daytime driving; 2. Alerting surrounding vehicles and pedestrians when the vehicle is turning by activating the small light; 3. Providing road illumination during nighttime driving. Vehicle lighting consists of position lights, turn signals, headlights, fog lights, reverse lights, and brake lights. The methods for using lights during rainy weather are: 1. When it starts raining lightly, turn on the daytime running lights; 2. When the rain intensifies, turn on the headlights and front fog lights; 3. In case of heavy rain, turn on the low-beam lights along with the front and rear fog lights.
1
1
Share

What are the methods to distinguish between China V and China VI standards for passenger cars?

The methods to distinguish between China V and China VI standards for passenger cars are: 1. Check the relevant content on the vehicle's compliance certificate; 2. Review the environmental information accompanying the vehicle list; 3. Log in to the Motor Vehicle Environmental Protection Network for inquiry; 4. Verify the national standard number referenced in the vehicle conformity certificate, as the standard number and corresponding year can indicate whether it is China V or China VI. The differences between China V and China VI standards for passenger cars include: 1. Different implementation times: China V standard was implemented in December 2017; China VI standard was implemented in December 2014. 2. Different sulfur content limits: China V standard allows no more than 10mg per kilogram; China VI standard allows no more than 50mg per kilogram. 3. Different PM fine particle limits: China V standard allows 4.5mg per kilometer for particulate matter; China VI standard allows 3mg per kilometer for particulate matter.
15
2
Share

What is the voltage of a car battery?

Car batteries typically operate between 11.8 volts and 12.8 volts. The correct charging method for a car battery is as follows: 1. Connect the positive terminal of the battery to the positive terminal of the power source and the negative terminal to the negative terminal; 2. Charge until the electrolyte releases bubbles and the single-cell voltage rises to 2.3 to 2.4 volts, then stop; 3. Reduce the charging current to half; 4. Measure the single-cell voltage until it reaches 2.7 volts, indicating the charging is complete. A car battery consists of plate groups, separators, electrolyte, casing, terminals, connecting straps, and filler cap. Maintenance tips for car batteries include: 1. Avoid parking the car in open parking lots for extended periods; 2. In winter, avoid repeatedly starting the car without intervals; 3. Regularly charge the car battery; 4. Periodically clean the battery terminals and apply grease to protect the wiring harness.
4
5
Share

How often should the brake pads of the Qashqai be replaced?

The brake pads of the Qashqai should be replaced every 30,000 to 50,000 kilometers. The replacement method is as follows: 1. Remove the wheels of the brake; 2. Use a wrench to remove the brake caliper bolts and take out the brake pads; 3. Clean the debris from the brake caliper with a cloth; 4. Install the new brake pads on the brake caliper; 5. Tighten the guide bolts and check the braking effect. Taking the 2021 Intelligent Edition Qashqai as an example, its body dimensions are: 4401mm in length, 1837mm in width, 1593mm in height, with a wheelbase of 2646mm and a fuel tank capacity of 57 liters. The 2021 Intelligent Edition Qashqai features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151PS, a maximum power of 111kW, and a maximum torque of 194Nm.
7
4
Share

Where are the six airbags located in the Qashqai?

The six airbags in the Qashqai are located on the steering wheel, above the glove box on the passenger side, the left side of the driver's seat, the right side of the passenger seat, and on both doors. Taking the 2021 Qashqai as an example, it is a midsize SUV with body dimensions of 4401mm in length, 1837mm in width, and 1593mm in height, with a wheelbase of 2646mm, a fuel tank capacity of 57 liters, and a curb weight of 1444kg. The 2021 Qashqai features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151PS, a maximum power output of 111kW, and a maximum torque of 194Nm, paired with a 7-speed continuously variable transmission.
18
4
Share

What is the fog light bulb model for Hyundai Elantra?

The fog light bulb model for Hyundai Elantra is 9006. The fog light source has strong penetration and is used to illuminate the road and provide safety warnings during rainy or foggy weather, improving visibility for the driver and other traffic participants. Taking the 2020 Hyundai Elantra as an example, its body dimensions are: length 4610mm, width 1800mm, height 1450mm, wheelbase 2700mm, trunk capacity 458l, and curb weight 1319kg. The 2020 Hyundai Elantra is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 130PS, maximum power of 95.6kW, maximum torque of 211Nm, and is paired with a 7-speed dual-clutch transmission.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.