What is the fuel consumption of the Tank 300 Urban Edition?

What is the fuel consumption of the 2021 Geely Boyue Pro 1.8T?

The fuel consumption of the 2021 Boyue Pro 1.8T is 8.9L/100km. Below are the reasons for the relatively high fuel consumption of the Geely Boyue: 1. SUV model: As an SUV model, the high fuel consumption of the Boyue is a normal phenomenon. Compared to sedans, SUVs inherently have characteristics that lead to higher fuel consumption, such as a higher ground clearance, greater wind resistance, a bulkier body, and especially a heavier weight. 2. Vehicle weight up to 1.67 tons: The automatic transmission version of the Boyue weighs up to 1.67 tons, which is 40% heavier than A-segment sedans, making higher fuel consumption normal. Compared to models in the same class, the Boyue has higher fuel consumption due to its larger engine displacement.

1

5

Share

How to Use the Civic's A/C?

Turn off the A/C when heating and turn it on when cooling in the Civic. Below are the specific details of the Civic: 1. Configuration: The interior adopts the ST-Line style, featuring a 12.8-inch central control screen paired with a 10.1-inch LCD instrument panel. It includes configurations such as full-speed adaptive cruise control and an active safety system. 2. Powertrain: The powertrain is equipped with a 2.0T turbocharged engine, delivering a maximum power of 180 kW and a peak torque of 390 Nm, mated to an 8-speed automatic or 8-speed manual-automatic transmission. There is also a 2.7T V6 turbocharged engine option, producing a maximum power of 237 kW and a peak torque of 500 Nm, paired with an 8-speed manual-automatic transmission.

19

2

Share

How is liability determined when a car door is hit while opening?

When a car door is hit while opening, it can be divided into the following situations: Below are the relevant explanations: 1. Normal driving: If the rear vehicle is driving normally without any violations, and the front vehicle suddenly opens its door, causing the rear vehicle to hit the door, then the front vehicle bears full responsibility for the accident, while the rear vehicle is not at fault. Normal driving refers to driving within the speed limit and with motor vehicles driving in motor vehicle lanes and non-motor vehicles in non-motor vehicle lanes. 2. Violations involved: If the rear vehicle has committed violations, and although the front vehicle opened its door, the rear vehicle hit the front vehicle due to improper operation, then the specific liability should be determined by traffic police based on the actual situation at the scene. 3. Negligence: If the front vehicle's door opening is unrelated to the accident and the front vehicle has no violations, but the rear vehicle hits it due to negligence, then the rear vehicle bears full responsibility.

7

1

Share

How to drive when one side of the double yellow line is solid and the other is dashed?

When there is a dashed line on one side and a solid line on the other, lane changes are allowed. Only the side with the dashed line can cross into the lane with the solid line, and the lane change must be completed within the dashed segment. If you exceed the end of the dashed line, it is considered driving over the line. Below are some precautions to note when changing lanes in a dashed segment: 1. Violations: During peak traffic hours, do not force a lane change, as this may affect the normal flow of traffic behind you and could result in points deduction or fines. Additionally, when waiting in line at a traffic light, if the queue extends to the dashed segment, some drivers may try to squeeze into the adjacent lane if the vehicles there start moving slowly. This is also considered a violation. 2. No continuous lane changes: Even if the road is clear, you cannot change more than two lanes consecutively in a dashed segment. Continuous lane changes are a violation and may result in a 3-point deduction and a fine.

15

5

Share

How to Turn on the High Beam of Volkswagen Lavida?

Push the light lever on the left side of the steering wheel downward to turn on the high beam, and the high beam symbol will be displayed on the instrument panel simultaneously. For alternating between high and low beams, repeatedly pull the light lever on the left side of the steering wheel upward with your finger, and you will feel the lever automatically return after being pulled up. Alternately turning the high beam on and off at night can replace the horn to alert pedestrians and vehicles around to avoid causing excessive noise. The replacement process for the Volkswagen Lavida high beam bulb: 1. After the vehicle is turned off, wait for the engine to cool down completely before opening the engine hood to prevent burns from the high engine temperature. 2. After opening the engine, you can see the dust cover of the headlight assembly, which is mostly made of rubber. Locate the high beam dust cover and remove it, then you can see the bulb base inside the headlight assembly. Disconnect the wiring harness plug. 3. Pinch the wire clip next to the base, and once the clip is loose, the bulb can be directly removed. 4. Install the new bulb, and please pay attention to electrical safety when handling electrical equipment.

11

1

Share

Where is the keyhole for the one-button start located?

The keyhole for the one-button start is located inside the armrest box or under the cup holder mat. The position varies depending on the vehicle model. Some models hide the mechanical key behind the one-button start button, requiring the plastic button to be pried out to see it. In other vehicles, it may be on the right side of the steering wheel, covered by a plastic round plate. If this cover can be rotated, it indicates the presence of a mechanical keyhole underneath. The one-button start in vehicles is part of smart car technology, serving as a simplified button device for starting the car and also for turning off the engine. This device can be installed at the original lock position of the vehicle or on an independent panel through modification. Using the one-button start function in vehicles is relatively convenient. Besides starting the car, the one-button start also has a battery protection function. It cuts off the power supply about 10 minutes after the vehicle is turned off. This feature is particularly useful for owners who often forget to turn off their car lights, as it saves energy and protects the car battery. Additionally, it offers anti-theft functionality by implementing a full lock system, allowing real-time monitoring and control of various fuel and electrical circuits.

14

0

Share

What is the fuel consumption of the Tank 300 Urban Edition?

What is the fuel consumption of the 2021 Geely Boyue Pro 1.8T?

How to Use the Civic's A/C?

How is liability determined when a car door is hit while opening?

How to drive when one side of the double yellow line is solid and the other is dashed?

How to Turn on the High Beam of Volkswagen Lavida?

Where is the keyhole for the one-button start located?

What is the ground clearance of the Haval H6?

What is Automobile Value-Added Tax?

How to Adjust the Seats in a Lexus UX?

What is the real fuel consumption of the 2021 Boyue Pro 1.8T?