What is the fuel consumption of the Sylphy?

1 Answers
MaximusLee
07/29/25 5:28pm
The fuel consumption of the Sylphy is generally around 4.9-6.1L per 100 kilometers. The following are the factors that affect a car's fuel consumption: 1. Advanced automotive technology is crucial for fuel consumption: The vehicle's own weight, the car's design, and the engine's thermal efficiency are three key automotive technologies related to fuel consumption. 2. Good vehicle condition is the fundamental reason for fuel efficiency: In addition to paying attention to the cleanliness of the car, it is also important to maintain the car correctly, such as lubricating the wheel hub bearings on time, regularly replacing the air filter element, and promptly checking the condition of the car's brakes. 3. Incorrect driving habits can lead to a significant increase in fuel consumption: As cars become more widely used in households, there are more non-professional drivers, and some drivers' bad habits can lead to increased fuel consumption. 4. Road conditions determine a car's fuel consumption: According to experts, driving in urban conditions can increase fuel consumption by 20% compared to driving on a test track. The biggest factor affecting fuel consumption in urban driving is frequent starts, stops, gear shifts, accelerations, and decelerations caused by traffic congestion. Driving on roads with poor surface conditions can also increase fuel consumption.
Was this review help?
7
3
Share
More Forum Discussions

What is the idle speed in second gear?

The idle speed in second gear is 5--10 km/h. Below is relevant information about idle speed: Introduction: A car's idle refers to an operating condition where the engine runs without load, known as idle speed. This occurs when the car is in neutral gear, and the engine speed during idle is called idle speed, which can be adjusted by modifying the throttle opening size, among other methods. Classification: Normal idle: When the vehicle is parked and the engine is started, the minimum stable engine speed is referred to as parking idle. Driving idle: During gear shifting, if the accelerator pedal is not pressed or is released while driving, maintaining the minimum throttle opening, the engine speed matches the parking idle speed, which is termed driving idle.
10
1
Share

What is the difference between SP oil and SN oil?

Here are the specific differences between SN oil and SP oil: 1. Grade: SN is the second grade of gasoline engine oil; SP is currently the highest grade of gasoline engine oil. 2. Oil film: SN has a relatively weak oil film; SP has a relatively strong oil film. 3. Protection performance: SN has average protection performance; SP has relatively strong protection performance. Below is extended information on the specific introduction of engine oil quality grades: 1. API Grade: API is the abbreviation of the American Petroleum Institute. The API grade represents the quality grade of engine oil. It uses codes to describe the working capability of engine oil. The grades are divided into SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, and SN, with the later letters indicating higher grades. SP grade is currently the highest grade of engine oil. SJ is the standard from the 1990s, SL is the standard from 2001, SM is the standard from 2004, and SN is the standard from 2010. 2. Engine oil grade: SP-grade oil, as the highest grade of engine oil, is generally classified as fully synthetic oil. Semi-synthetic oils are mainly SL and SM grades, with some being SN grade. Among international brands, most engine oils are SF grade or higher. For example, Shell Helix Ultra is API-SM grade, while Shell Helix Red is API-SG grade, indicating that the quality grade of Helix Ultra is higher than that of Helix Red.
4
1
Share

What happens if the secondary air pump is broken and not replaced?

If the secondary air pump is broken and not replaced, the malfunction indicator light will illuminate, and a trouble code indicating "incorrect secondary air flow" may appear. Below is more information about the secondary air pump: Introduction: The secondary air system is one of the external purification devices designed to reduce exhaust emissions. It is used for exhaust reprocessing during the engine warm-up phase. In this process, fresh air is directly blown into the exhaust manifold to heat the catalytic converter more quickly. The engine controls the secondary air pump through the secondary air pump relay. Function: When the engine is cold, the secondary air pump supplies air to the three-way catalytic converter. This allows the exhaust gases to react with the oxygen in the air for secondary combustion, thereby increasing the temperature of the three-way catalytic converter. This helps the catalytic converter reach its optimal operating temperature faster, reducing the emission of harmful substances in the exhaust and serving an environmental protection purpose.
18
0
Share

What is the reason for frequently failing to shift from second gear to third gear?

In the process of shifting from second gear to third gear, the reasons for frequent failure are as follows: Poor coordination between throttle and clutch: During the upshift process, you should first release the throttle, then press the clutch pedal, or both actions can be performed simultaneously. However, it's important to remember that you must not shift gears while pressing the throttle. If the throttle is not fully released during shifting, it may cause the gear shift to be jerky. Clutch not fully depressed: Before driving, you should familiarize yourself with the position and depth of the clutch pedal. If you shift gears without fully depressing the clutch, it can not only cause jerky shifting but also lead to gear grinding in the transmission. In severe cases, it can directly damage the gears inside the transmission.
5
2
Share

Do You Need to Return to Neutral When Downshifting from Second to First Gear?

Downshifting from second to first gear does not require returning to neutral. Points to note when shifting gears in a car: Note 1: Accelerate before upshifting, decelerate before downshifting. Gear shifting should be timely, correct, smooth, and quick, and upshifting should not skip gears. Note 2: Coordinate the clutch pedal, throttle pedal, and gear lever. Information about car gears is as follows: First gear: This is the starting speed, usually between 0-5km/h. Second gear: Corresponding speed is between 5-20km/h. Third gear: Corresponding speed is between 20-40km/h. Fourth gear: Corresponding speed is between 40-60km/h. Fifth gear: Corresponding speed is between 60-100km/h.
7
2
Share

Can You Stop Directly by Braking in Second Gear?

You cannot stop directly by braking in second gear. When stopping in second gear, you need to first apply the brakes, and then press the clutch when the speed decreases to near stopping. This is to prevent the engine from stalling. In case of an emergency requiring immediate stopping, you should press both the clutch and brake simultaneously. Below are some related tips: Proper intermittent braking: Apply intermittent braking, with higher and longer frequency being more effective to prevent the vehicle from rolling over. Low-speed driving: When emergency braking on icy or snowy roads, the vehicle is prone to skidding. You should use low-speed driving to allow engine braking to decelerate.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.