What is the fuel consumption of the Subaru Forester?

How to Purchase Compulsory Traffic Insurance After a One-Year Lapse?

For a compulsory traffic insurance that has lapsed for one year, there is no need to make up the missed payments; you can purchase it directly, and it will take effect the next day. According to the 'Compulsory Traffic Insurance Regulations,' all owners or managers of motor vehicles driven on roads within the territory of the People's Republic of China must purchase compulsory traffic insurance. If the owner or manager of a motor vehicle fails to purchase compulsory traffic insurance as required, the traffic management department of the public security organ has the authority to detain the vehicle, notify the owner or manager to purchase the insurance in accordance with the regulations, and impose a fine of twice the amount of the insurance premium that should have been paid. The following is an introduction to the types of comprehensive auto insurance: 1. Traffic Insurance: The full name is Compulsory Traffic Accident Liability Insurance. The insurance company compensates for personal injuries, deaths, and property losses of victims (excluding cyclists and the insured) caused by road traffic accidents involving the insured vehicle within the liability limit. 2. Third-Party Liability Insurance (abbreviated as TPL Insurance): The full name is Commercial Third-Party Liability Insurance. It refers to the compensation amount that the insured should pay according to the law for accidental incidents caused by a qualified driver permitted by the insured while using the insured vehicle, resulting in bodily injury, death, or direct property damage to a third party. The insured compensates according to the relevant provisions in the insurance contract. 3. Auto Damage Insurance: This refers to commercial auto insurance where the insurance company compensates within a reasonable range for damage to the insured vehicle caused by an insurance incident while the insured or a permitted driver is operating the insured vehicle. Auto Damage Insurance and Third-Party Liability Insurance are the basic insurances for vehicles, mainly covering the loss of the insured vehicle and the loss caused to a third party during the use of the insured vehicle. 4. No-Claim Insurance: The full name is No-Claim Discount Special Clause, which is an additional insurance to commercial insurance (Auto Damage Insurance or Third-Party Liability Insurance). As an additional insurance, No-Claim Insurance must be purchased alongside the main insurance and cannot be purchased separately. Its insurance liability usually refers to special agreements.

3

4

Share

Can You Still Drive When the ABS Yellow Light Is On?

When the ABS warning light is on, it is recommended not to continue driving because the illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. There are various states in which the ABS light may illuminate, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed and the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay lead to signal issues, causing system failure. Solution: Inspect the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical components are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS light turns off. Another possible cause is insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; or a faulty ABS computer. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors and replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, typically found on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch linkage down fully, then release the brake pedal to complete the self-setting process. Replace the brake light switch if necessary.

20

4

Share

Is there a filter inside the transmission?

There is a filter inside the transmission, which is used to filter the transmission fluid. The transmission contains transmission fluid. For manual transmissions, the fluid serves the purpose of lubrication and cooling; for automatic transmissions, the fluid functions to lubricate, cool, and transmit power. Automatic transmissions have shift control mechanisms that require transmission fluid to operate properly. Over time, the transmission fluid accumulates metal debris. If this debris is not filtered out, it will continuously circulate within the transmission, accelerating wear and potentially damaging the control mechanisms. When replacing the transmission fluid, the transmission filter should also be replaced.

10

3

Share

What happens if too much transmission fluid is added?

Effects of adding too much transmission fluid: 1. The fluid level will be too high, and during driving, the fluid easily contacts rotating components. The agitation of the fluid by these components can create bubbles, which, when drawn into the oil pump, lead to abnormal oil pressure and reduced lubrication effectiveness. 2. It can cause the drainage holes on the control valve to become blocked, resulting in poor drainage and causing gear shift shocks. 3. The resistance experienced by rotating gears increases, affecting the transmission's efficiency. Transmission fluid is used to keep the gear system clean in automatic transmissions and serves to lubricate and prolong the life of the transmission components.

12

4

Share

Can I Claim Compensation for Airbag Failure in a New Car?

New car airbag failure can be claimed for compensation. The following is a detailed introduction about car insurance: 1. Overview: Vehicle insurance, also known as motor vehicle insurance or auto insurance, refers to a type of commercial insurance that covers personal injury or property damage caused by natural disasters or accidents involving motor vehicles. 2. Others: Auto insurance is a type of property insurance. In the field of property insurance, auto insurance is a relatively young category. In the early stages of auto insurance, the main coverage was third-party liability insurance for vehicles, which gradually expanded to include risks such as collision damage to the vehicle body.

15

2

Share

Can ESP be installed in a car afterwards?

In theory, ESP can be installed in a car afterwards, but it is not recommended. Models without ESP have significant differences in braking calibration compared to factory-installed ones, and self-installation can easily lead to issues. Due to its complexity, high precision requirements, and the extensive modifications needed, the key concerns are software compatibility and hardware reliability, which cannot be guaranteed. Installing ESP afterward will void the warranty, and the retrofitted ESP system, whether in layout or wiring arrangement, cannot be as scientifically designed as the original. It cannot ensure the ESP functions effectively under long-term vibration and electromagnetic interference, and any slight negligence may cause electrical faults in the vehicle.

8

3

Share

What is the fuel consumption of the Subaru Forester?

How to Purchase Compulsory Traffic Insurance After a One-Year Lapse?

Can You Still Drive When the ABS Yellow Light Is On?

Is there a filter inside the transmission?

What happens if too much transmission fluid is added?

Can I Claim Compensation for Airbag Failure in a New Car?

Can ESP be installed in a car afterwards?

Can a Sedan Carry 1000 Jin?

What does automotive 4S refer to?

What is an Oil Dipstick?

Where is the rearview mirror heating switch in a Mercedes-Benz?