What is the fuel consumption of the Seres Huawei SF5?

1 Answers
StGenevieve
07/30/25 8:21am
The fuel consumption of the Seres Huawei SF5 is 6.3L. Below is the related information: Factors affecting fuel consumption: The driver's habits, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period, among other factors, can all affect the vehicle's fuel consumption. Ways to reduce fuel consumption: Start in a low gear, gently press the accelerator, and gradually increase speed; avoid prolonged idling or low-speed driving; avoid overloading the vehicle and keeping the fuel tank full; avoid using high-viscosity engine oil; try to control speed with the accelerator rather than the brakes.
Was this review help?
18
0
Share
More Forum Discussions

How many kilometers can an Audi A6L run?

Audi A6L can run about 100,000 kilometers. At 100,000 kilometers, it is generally necessary to overhaul the engine to extend its service life. Meaning of vehicle service life: Vehicle service life (operating-life-of-motor-vehicle) refers to the continuous driving distance or continuous usage time from when a vehicle is put into operation after leaving the factory until it is no longer in use due to aging, wear and tear of parts, and other damages that gradually reduce the vehicle's performance and increase various consumptions. Vehicle mileage: Vehicle mileage refers to the total distance a vehicle has traveled, including all kilometers driven forward and backward from the time it left the factory until now. It is one of the important criteria for judging vehicle performance. Moreover, the maintenance level is also related to the vehicle mileage, and the extent of car maintenance required is also associated with the mileage.
4
2
Share

What is the reason for the abnormal noise when shifting gears in the Mercedes-Benz C200L?

Mercedes-Benz C200L has abnormal noise when shifting gears for the following reasons: Abnormal piston condition: Excessive clearance between the piston and cylinder wall; the piston pin is assembled too tightly or the connecting rod bearing is assembled too tightly; excessive clearance between the tappet and its guide hole; wear of the cam profile; sometimes, the starting claw is loose, causing the pulley to make noise (especially noticeable when the speed changes). Abnormal camshaft timing gear: The camshaft timing gear is cracked or its fixing nut is loose; the crankshaft is broken; the piston pin bushing is loose; the camshaft axial clearance is too large or its bushing is loose. Abnormal bearing condition: The connecting rod bearing is loose, the bearing shell is melted or the size does not match and rotates; the crankshaft bearing is loose or the bearing shell is melted; the piston pin is broken; the crankshaft is broken.
6
5
Share

What type of engine oil should be used for a BMW 118?

It is recommended to choose engine oil with a viscosity grade of either 5W-30 or 5W-40. If the vehicle is frequently driven in urban areas or for short distances, fuel consumption may be slightly higher. To mitigate this, avoid sudden braking and aggressive acceleration, and reduce the vehicle's load weight. Engine oil viscosity grades: Both semi-synthetic and full synthetic oils have their own grading systems, which many car owners notice during oil changes, such as 5W-30 or 5W-40. These grades indicate the oil's resistance to freezing and its high-temperature viscosity. Engine oil quality ratings: Engine oils labeled with an "S" at the beginning are designed for gasoline engines, while those labeled with a "C" are for diesel engines. API stands for the American Petroleum Institute, and the API rating represents the quality grade of the engine oil. It indicates the oil's performance capability in engine operation.
14
4
Share

What is the engine model of the Orlando?

The engine of the Orlando is produced at the SAIC-GM factory in Shanghai. The Orlando uses the LIY engine model, with a maximum horsepower of 163 hp, a maximum power output of 120 KW at 5500 rpm, and a peak torque of 230 N.m. For daily maintenance of the Orlando's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD to SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB to CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will degrade over time. After a certain mileage, the oil's performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
8
1
Share

What is the reason for the Passat not having idle speed?

Passat does not have idle speed for the following reasons: Intake pipe leakage: Fault analysis: According to the idle speed stability control principle of the engine, under normal circumstances, the opening degree of the idle speed control valve and the intake air volume strictly follow a certain functional relationship, that is, as the opening degree of the idle speed control valve increases, the intake air volume increases accordingly. If there is a leak in the intake pipe, the intake air volume and the opening degree of the idle speed control valve will not strictly follow the original functional relationship, meaning there will be sudden changes in the intake air volume as the idle speed control valve changes. The air flow meter cannot measure the true intake air volume, causing the ECU to inaccurately control the intake air volume, resulting in unstable engine idle speed. Idle speed switch not closing: Fault analysis: If the idle speed contact is disconnected, the ECU determines that the engine is under partial load. At this time, the ECU determines the fuel injection volume based on the signals from the air flow meter and the crankshaft speed. However, the engine is actually operating under idle conditions with less intake air, causing the mixture to be too rich and the speed to rise.
7
2
Share

What causes the noise from the co-pilot seat in a Bora?

Bora co-pilot seat noise causes are as follows: Dust entering the windshield: Driving in areas with high wind and sand, it is common to find the windshield making noise. Whenever the vehicle drives on slightly bumpy roads or the hollow position of undulating roads, it will make a "creaking" sound, which is particularly annoying. Solution: Generally, this situation occurs on the front windshield. It might be mistaken for the plastic clips of the center console not being tight enough, but it is actually caused by dust entering the windshield. Simply remove the connecting plate and clean it to solve the problem. Aging of door seals: The function of door seals is to prevent rainwater and dust from entering the cabin. Since the seals are rubber products, they will gradually age and wear out due to exposure to wind and sun. While driving, you will clearly feel wind noise and friction noise. Solution: If the seals are severely aged and damaged, it is recommended to replace them directly, as the value of maintenance is not high. It is suggested to regularly clean the dust and rainwater between the gaps of the seals during daily use to prevent aging.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.