What is the fuel consumption of the Sehol X8 per 100 kilometers?

2 Answers
ZacharyAnn
07/29/25 1:12am
The official fuel consumption of the Sehol X8 is 7.2 liters per 100 kilometers. The actual fuel consumption may vary slightly depending on individual driving habits and skills. A smoother driving style generally results in lower fuel consumption, while aggressive driving behaviors such as frequent acceleration and overtaking at high RPMs can increase fuel consumption. Here are some tips to save fuel: 1. Maintain a steady speed: Control your speed and avoid sudden braking. 2. Avoid opening windows at high speeds: Opening windows at high speeds can increase fuel consumption. 3. Regularly check tire pressure: Ensure your tires are properly inflated, as both underinflation and overinflation can increase fuel consumption. 4. Maintain the transmission: Always use the correct transmission fluid for your vehicle, as it not only lubricates but also helps transmit torque. Regular replacement is essential.
Was this review help?
15
0
Share
VonJosiah
08/12/25 5:21am
As a long-time car enthusiast, I've learned that the official combined fuel consumption of the JAC X8 is labeled at 7.3 liters per 100 kilometers. Based on actual test results, this figure is relatively reliable but can be affected by various factors. For example, in congested urban driving conditions, due to frequent stops and starts, fuel consumption may rise to over 8.5 liters. On the highway, if the speed is maintained steadily between 80-100 km/h, fuel consumption can drop to around 6.8 liters, saving a significant amount on fuel costs. Vehicle load is also crucial—when fully loaded with passengers or luggage, fuel consumption naturally increases. In terms of driving habits, rapid acceleration or using the air conditioning can push up fuel consumption, so I recommend maintaining smooth driving to optimize it. If you're curious about detailed data, you can check the manufacturer's manual or online review reports. Overall, 7.3 liters is a reasonable reference value.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

What's the reason for the P0322 trouble code preventing startup?

P0322 trouble code, applicable to all automobile manufacturers, indicates no signal in the ignition/distributor engine speed input circuit. Causes include engine speed sensor failure, sensor wheel malfunction or mismatch, electronic control module (PCM or ECM) failure, etc. More relevant information is as follows: 1. Clearing the trouble code: After troubleshooting the car, it is generally necessary to clear the trouble code. When clearing the trouble code, be sure to strictly follow the specified method for the specific vehicle model. 2. Do not arbitrarily remove the battery's negative terminal: Do not arbitrarily use the method of removing the battery's negative terminal to clear the car's trouble code. Otherwise, it may cause some vehicle models' control center computers to lose normal records, and sometimes it may also lead to some useful functions not working.
20
1
Share

What does the maximum speed value indicate?

The sidewall of a tire features numerous alphanumeric markings, which represent the tire brand, model, production date, and specifications. Among these is a speed rating letter that indicates the maximum speed the tire can safely maintain under specified conditions. The further the letter is in the alphabet, the higher the speed it represents. Common tire speed ratings and their corresponding letters are as follows: 1. Letter S: Represents a maximum speed of 180 km/h; 2. Letter T: Represents a maximum speed of 190 km/h; 3. Letter U: Represents a maximum speed of 200 km/h; 4. Letter H: Represents a maximum speed of 210 km/h; 5. Letter V: Represents a maximum speed of 240 km/h; 6. Letter W: Represents a maximum speed of 270 km/h; 7. Letter Y: Represents a maximum speed of 300 km/h.
6
4
Share

Can the Rear Wheel Fender Liner Be Removed?

Rear wheel fender liners cannot be removed. Functions of the fender liner: It prevents mud, sand, and gravel carried by the wheels from hitting the underbody of the vehicle, effectively protecting the chassis from corrosion. If the fender liner is damaged, it must be replaced promptly. Materials of the fender liner: There are three types of materials: the first is plastic, the second is steel plate, and the third is aluminum alloy. Most vehicles use plastic fender liners. Under normal usage, the likelihood of damage to the fender liner is very low. Issues mainly arise when driving on extreme road conditions. Installation method: It is secured either by clips or screws. Regardless of the method used, the fender liner is effectively fixed to the fender. If abnormal noises are heard near the vehicle's wheels, the first thing to check is whether the fender liner has become loose.
7
2
Share

Is the Lamando equipped with a dry dual-clutch transmission?

The Lamando models, except for the 330TSI and Lamando GTS which use wet dual-clutch transmissions, are all equipped with dry dual-clutch transmissions. Taking the Lamando 2021 230TSI DSG Fashion Edition as an example: it is powered by a 1.4T 131-horsepower L4 turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 96 kilowatts and a maximum torque of 225 Newton-meters. The body dimensions of the Lamando 2021 230TSI DSG Fashion Edition are 4615 mm in length, 1826 mm in width, and 1425 mm in height, with a wheelbase of 2656 mm, a fuel tank capacity of 51 liters, a luggage compartment capacity ranging from 480 liters to 1150 liters, and a curb weight of 1325 kilograms.
1
1
Share

What Causes the Malfunction Light to Illuminate, Lack of Power When Accelerating, and Inability to Gain Speed?

Poor quality gasoline that does not meet standards, faulty oxygen sensor, malfunctioning air flow sensor, carbon buildup on spark plugs, engine knocking, or engine misfiring. Related explanations: 1. Carbon buildup on spark plugs: Leads to poor engine performance, resulting in unstable idling, poor acceleration, increased fuel consumption, and other abnormal phenomena. 2. Air flow sensor: Detects the intake air and converts it into an electrical signal sent to the electronic control unit (ECU), allowing the ECU to determine how much fuel to inject. 3. Oxygen sensor: Since the purification capability of the three-way catalyst for CO, HC, and NOX sharply decreases once the air-fuel ratio deviates from the theoretical value, an oxygen sensor is installed in the exhaust pipe to detect the oxygen concentration in the exhaust and send feedback signals to the ECU. The ECU then adjusts the fuel injector's fuel injection volume accordingly, keeping the air-fuel ratio close to the theoretical value.
9
2
Share

How to Repair a 12V Battery After It Runs Out of Power?

12V battery repair method after power loss: 1. Open the battery cover and remove the 6 safety caps; 2. Use a syringe to fill each hole with distilled water. If it's a 1.28 standard electrolyte, the plates may burn due to excessive acid concentration, and the acid in the battery will not evaporate. What's missing is water, so just add about 20 to 30ml of distilled water to each small hole; 3. After filling, let the battery sit for half an hour to allow the sponge around the plates to fully absorb the water, then use a resistor to discharge all the electricity from the battery; 4. After discharging, charge the battery. A pulse charging method can be used because it effectively removes plate sulfation and increases battery capacity; 5. After charging is complete, use a syringe to extract excess water from each hole; 6. Put the caps and cover back on, and the battery is ready for use in the vehicle.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.