What is the fuel consumption of the Santana Zhijun 1.8 manual?

What Causes the Feeling of Slipping During Normal Driving?

Wheel slipping can occur in three scenarios: 1. Rear wheel slipping causes the vehicle to skid sideways, making it uncontrollable for the driver. 2. Four-wheel slipping happens when all four wheels lock up during braking and cannot rotate. 3. Front wheel slipping mostly occurs when taking curves or turns at excessive speed or on slippery roads. Below are more related tips on preventing slipping: 1. Try to avoid stopping on slippery roads. If the vehicle slips during acceleration, remove mud or snow, and sprinkle dry ash, sand, or any anti-slip material on smooth surfaces. Start in second gear with light throttle. 2. On icy or snowy roads, use anti-slip chains (usually only on the rear wheels). Vehicles with four-wheel drive should engage the front drive. Do not use anti-slip chains on muddy roads. 3. Choose the appropriate gear based on the road's friction coefficient and conditions. Start in second gear (first gear is more prone to slipping), apply light throttle, and slowly release the clutch. You can drive at high gear with low speed, but avoid driving at low gear with high speed, as this can easily cause slipping.

5

1

Share

How Long After Passing Automatic Transmission Subject Two Can You Take Subject Three?

Article 41 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" stipulates that for first-time applicants for a motor vehicle driving license or those applying to add a permitted driving model, candidates for small cars (C1), small automatic transmission cars (C2), or small automatic transmission passenger cars for the disabled must wait at least 30 days after obtaining the learning driving certificate before they can schedule the Subject Three test. Below is more relevant information: 1. The sequence of Subject Two and Subject Three tests: As long as 30 days have passed since obtaining the learning driving certificate (i.e., 30 days after passing Subject One), you can schedule the Subject Three test. If this condition is met, you can schedule Subject Three even if you have just passed Subject Two. In essence, the ability to schedule Subject Three is unrelated to Subject Two; you could even take Subject Three before Subject Two. 2. Scheduling Subject Three is independent of Subject Two: As long as the learning driving certificate has been held for 30 days, you can schedule Subject Three, regardless of whether Subject Two has been passed. The vehicle management office should arrange the test according to the scheduled test site and time. After passing Subject One, applicants can schedule either Subject Two or Subject Three road driving skills test. In some regions, applicants may simultaneously schedule both Subject Two and Subject Three road driving skills tests and take them consecutively upon successful scheduling.

12

2

Share

When Will Chengdu Implement the China 6 Emission Standard?

According to the relevant plan, the implementation of the China 6 emission standard in Chengdu will be divided into two phases: "China 6a" and "China 6b", corresponding to July 1, 2020, and July 1, 2023, respectively. It can be said that China 6a is like a transitional stage from China 5 to China 6. The relevant policies regarding national emission standards in other regions are as follows: 1. Beijing: The previously released draft opinion that "Beijing will implement the China 6a emission standard on January 1, 2019" has been rejected. The official implementation of the China 6 standard for light fuel vehicles will be postponed to January 1, 2020. 2. Tianjin: The Tianjin Environmental Protection Bureau, the Public Security Bureau, and other departments jointly released a "Draft Opinion" on the China 6 policy. The opinion pointed out that the China 6 emission standard is planned to be implemented from July 1, 2019, but the notice is still in the opinion collection stage, which means that the implementation of China 6 in Tianjin will not be earlier than July 1, 2019.

9

3

Share

What is the fuel consumption of the Buick Excelle XT?

The Buick Excelle XT currently has 4 models on sale. Among them, the Excelle-2021-Modified-Exemplar-1.5L Automatic Entry and Automatic Elite models, equipped with a 113-horsepower engine, have an NEDC fuel consumption of 5.9L per 100km. The Excelle-2021-Modified-1.3T-Automatic Light Hybrid Entry and Automatic Light Hybrid Elite models, equipped with a 163-horsepower engine, have an NEDC fuel consumption of 5.3L per 100km. The fuel tank capacity is the same for all Excelle XT models. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 113-horsepower engine have a fuel tank capacity of 44L, allowing a distance of 44/5.9*100=746km. Models equipped with a 163-horsepower engine have a fuel tank capacity of 44L, allowing a distance of 44/5.3*100=830km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows

10

2

Share

What are the penalties for reversing at an intersection?

Reversing a motor vehicle at an intersection is equivalent to driving against traffic. Illegal overtaking and driving against traffic on urban roads will result in a fine of 50 yuan, a 3-month suspension of the driver's license, and 6 demerit points. However, reversing, driving against traffic, or making U-turns across the central divider on highways will result in an immediate deduction of 12 points. Additional information: 1. Article 50 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states that when reversing a motor vehicle, the driver should observe the situation behind the vehicle and confirm safety before reversing. Reversing is prohibited at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or tunnels. 2. Before reversing, the driver should first assess the situation behind the vehicle, estimate the reversing route, and determine whether the front of the vehicle will hit any obstacles during the process. Especially when the steering wheel is turned significantly, the turning radius of the front wheels is larger than that of the rear wheels, causing the front of the vehicle to swing outward more during reversing. In such cases, extra care must be taken to avoid scraping the front of the vehicle. This method is more suitable when parking on the right side or when a longer reversing distance is required. Driving against traffic at a cross intersection will result in a deduction of 3 points.

16

1

Share

Reasons for Excessive Carbon Monoxide in Vehicle Exhaust

Excessive carbon monoxide in the exhaust may be caused by incomplete combustion of gasoline in the engine. The main reasons and solutions are as follows: Main reasons: Spark plug failure, poor ignition, excessive cylinder wall clearance, uncalibrated valve timing, failed catalytic converter, poor fuel injector atomization, etc. Carbon buildup inside the engine fuel system, or a clogged/dirty catalytic converter that has lost its ability to convert carbon monoxide. Solutions: Remove engine carbon deposits, or clean/replace the catalytic converter. The correct solution should be determined based on accurate diagnosis of the excessive emission causes through steady-state exhaust gas test data.

15

0

Share

What is the fuel consumption of the Santana Zhijun 1.8 manual?

What Causes the Feeling of Slipping During Normal Driving?

How Long After Passing Automatic Transmission Subject Two Can You Take Subject Three?

When Will Chengdu Implement the China 6 Emission Standard?

What is the fuel consumption of the Buick Excelle XT?

What are the penalties for reversing at an intersection?

Reasons for Excessive Carbon Monoxide in Vehicle Exhaust

Is There Any Harm in Modifying One-Button Start?

Is a residence permit still required to obtain a driver's license in Chengdu?

How to Adjust the Clock on Chery Tiggo 3?

Why do China 6 diesel vehicles need to add urea?