What is the fuel consumption of the Roewe RX5 automatic transmission?

2 Answers
McRyan
09/02/25 6:58am
According to official data, the fuel consumption of the Roewe RX5 automatic transmission is 6.8L per 100 kilometers. Of course, this is just a reference value provided by the manufacturer. In real-world conditions, the actual fuel consumption is usually about 2L higher than the manufacturer's combined cycle figure, and the exact value should be measured by the user. Factors affecting fuel consumption include: 1. Rough roads increase fuel consumption: Driving on congested or uneven roads in low gear for extended periods will inevitably increase fuel consumption; 2. Overloading the trunk increases fuel consumption: Treating the trunk as a storage space and filling it with unnecessary items adds weight to the car. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in weight can lead to a corresponding percentage drop in fuel consumption; 3. Poor driving habits can double or triple fuel consumption: Incorrect driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.
Was this review help?
8
1
Share
FernandoLynn
09/15/25 2:13am
I've been driving the Roewe RX5 automatic transmission for over two years now, and the actual fuel consumption depends on road conditions and driving habits. In city traffic with frequent stops and starts, the fuel consumption is relatively high, around 9-10 liters per 100 kilometers. On expressways and highways, it's much more fuel-efficient, with the lowest consumption reaching about 7 liters. Using the air conditioning in summer increases consumption by around 1 liter, and maintaining standard tire pressure can also help save some fuel. The car's 1.5T engine paired with a dual-clutch transmission gives it an overall fuel consumption that's average among domestic SUVs. If you often drive long distances, a full tank can easily take you 600-700 kilometers. When I first bought the car, I was worried about fuel consumption, but now I find it completely acceptable.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

Can You Still Drive After 70 Years Old?

70-year-olds can still drive, and the following are the details regarding driving age: 1. Reaching 70 years of age: According to legal regulations, drivers aged 60 and above are prohibited from operating certain types of vehicles, such as large buses, tractors, and city buses. 2. Prerequisites for driving above 70 years of age: Once a driver reaches 70 years old, they must submit a personal physical condition certificate to the local vehicle management office within 30 days after the end of the scoring cycle to continue driving legally. 3. Drivers aged 60 or 70: Some driving licenses may also be subject to corresponding downgrades. For example, drivers originally holding an A1 or A2 license may be downgraded to the driving scope of a C1 or C2 license.
6
1
Share

What brand is Haima Happin?

Haima Happin is the Haima Fushion. Below is some relevant information about Haima Motors: The logo of Haima Motors: The logo features an abstract eagle shape embedded in a circle symbolizing the sun, representing 'the rising sun and the soaring roc,' which embodies Haima Motors' corporate image of striving upward and aspiring to soar. Product system: From the launch of its first HX6380 hatchback in 1991 to the 'Fukmeilai 2nd Generation' in 2006, Haima Motors introduced a total of 17 series comprising 30 models over 15 years. Fukmeilai: The Fukmeilai is based on the Japanese Mazda FAMILIA and is essentially produced in sync with Mazda Japan. As a family sedan beloved by consumers, the Fukmeilai has achieved remarkable sales performance over the past few years. The launch of the new Fukmeilai model further caters to personalized and youthful consumer demands.
15
1
Share

How often should a new car be driven?

A new car should be driven at least once a month because all its components, including the battery, tires, and engine oil, are brand new and more wear-resistant compared to a car that has been used for several years. Here are some guidelines regarding car usage: 1. When the car is not used for a long time: Start the engine at least once a week, running it for at least 30 minutes each time, and regularly check for any abnormal operation of the engine. 2. It's best to drive a certain distance every week: This helps maintain the vehicle's various performance aspects. When a car is left unused, fluids such as engine oil, brake fluid, coolant, and electrolyte are prone to oxidation and deterioration, so these fluids should be given extra attention. 3. Regularly check the quality of the engine oil: Poor lubrication can damage the vehicle. After using the same oil for six months, check it monthly or before a trip. Remove some oil using the dipstick to inspect the oil level and quality.
5
2
Share

When removing a tire, is it clockwise or counterclockwise?

When removing a tire, loosen the bolts in a counterclockwise direction and tighten them in a clockwise direction. Below are the specific details regarding tire replacement: 1. Tread wear approaches the wear indicator: Any brand of tire will have a wear indicator at the bottom of the tread grooves. Generally, the height of the wear indicator for passenger car tires is 1.6 millimeters (this is also the legally mandated minimum groove depth for tires), while the wear indicator height for heavy-duty tires is 2.4 millimeters. 2. Tire damage such as cracks or bulges: Tire damage includes tread cracks, tread bulges, missing tread rubber, severe sidewall wear, and multiple punctures by foreign objects, especially bulges, which pose an imminent risk of tire blowout. Whenever such damage is noticed, the owner should promptly take the vehicle to a professional tire shop for inspection and timely replacement. 3. Tire age expiration: The typical service life of a tire is around 5 years. Beyond this period, the tire begins to age. The main signs of tire aging are surface hardening followed by the appearance of cracks.
3
2
Share

How to Accurately Identify the Manufacturing Date of a Tire?

Tire manufacturing dates are marked on the outer side of the tire. Without needing to flip the tire over, you can find a set of numbers on the sidewall of the tire. The last four digits of this number sequence provide information about the production date. These four digits are in the format aabb, where the first two digits aa indicate the week of the year, and the last two digits bb represent the year. Here are some relevant details: 1. Serial Number: Immediately following the DOT letters on the tire sidewall, there is an 11-digit alphanumeric code which serves as the tire's identification or serial number. The last four digits of this serial number indicate the tire's production date. 2. Format: The tire production date code format consists of the first two digits representing the production week and the last two digits indicating the production year. For example, if the last four digits of the DOT code are 4117, it means the tire was manufactured in the 41st week of 2017.
4
5
Share

Where is the oxygen sensor installed in a car?

The oxygen sensor is installed in the exhaust pipe, typically with the first one located before the catalytic converter and the second one after it. One sensor detects the engine's combustion conditions, while the other monitors the oxygen levels after the catalytic converter. You can identify the oxygen sensor as the large screw with wires attached on the exhaust pipe. Here is some relevant information about automotive oxygen sensors: 1. Function: The oxygen sensor is a critical feedback sensor in the electronic fuel injection system, playing a key role in controlling vehicle emissions, reducing environmental pollution, and improving fuel combustion efficiency in the engine. Oxygen sensors are always installed on the engine's exhaust pipe. 2. Working Principle: The oxygen sensor operates similarly to a battery, with zirconia elements acting like an electrolyte. Its basic principle is that under certain conditions (high temperature and platinum catalysis), it generates a voltage difference based on the oxygen concentration gradient between its inner and outer surfaces. The greater the concentration difference, the larger the voltage difference. The oxygen content in the atmosphere is 21%, while the exhaust from rich mixture combustion contains virtually no oxygen. The exhaust from lean mixture combustion or misfires contains more oxygen, but still significantly less than atmospheric levels.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.