What is the fuel consumption of the Roewe ei6 hybrid?

Does the Suzuki Beidouxing have an automatic transmission?

Suzuki Beidouxing does not have an automatic transmission, it only comes with a manual transmission, which relies entirely on the driver's control. Taking the 2019 Suzuki Beidouxing as an example, its body dimensions are: length 3400mm, width 1575mm, height 1705mm, wheelbase 2335mm, fuel tank capacity 42l, and luggage compartment capacity ranging from 633 to 1377l. The 2019 Suzuki Beidouxing is equipped with a 1.4l naturally aspirated engine, with a maximum power of 71kw and a maximum torque of 120nm, paired with a 5-speed manual transmission. It uses a MacPherson independent suspension for the front suspension type.

9

2

Share

What causes the drive shaft vibration in Haval H6?

The reasons for drive shaft vibration in Haval H6 are: 1. The drive shaft is bent and deformed, causing eccentricity; 2. The drive shaft loses balance; 3. The balance piece on the drive shaft falls off; 4. The spline teeth of the second shaft in the transmission cover and the internal spline in the drive shaft pipe are severely damaged. The body dimensions of Haval H6 are 4649mm in length, 1852mm in width, and 1710mm in height, with a wheelbase of 2680mm. Haval H6 is a compact SUV, equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The front suspension of Haval H6 uses MacPherson independent suspension, and the rear suspension uses double-wishbone independent suspension.

5

3

Share

Which Technologies in Lynk & Co are from Volvo?

Lynk & Co's CMA architecture technology is jointly developed by Geely and Volvo. The chassis and engines used in Lynk & Co vehicles are also products from Volvo, although the transmission is not from Volvo. Lynk & Co's model lineup includes the Lynk & Co 01, Lynk & Co 02, Lynk & Co 03, among others. The Lynk & Co 01 and Lynk & Co 02 are SUVs, while the Lynk & Co 03 is a compact sedan. The Lynk & Co 03 measures 4657 mm in length, 1840 mm in width, and 1460 mm in height, with a wheelbase of 2730 mm. The Lynk & Co 03 is equipped with three turbocharged engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine.

14

3

Share

How Many Stickers Should Be Affixed to a Motor Vehicle?

Motor vehicles should affix 3 stickers, which are: the Motor Vehicle Inspection Compliance Sticker, the Vehicle Environmental Protection Sticker, and the Compulsory Insurance Sticker. If the driver has held a license for less than one year, a probationary driver sticker must also be affixed to the rear of the vehicle. The annual inspection sticker serves as proof that the vehicle has passed inspection and should be affixed to the front windshield. If lost, the vehicle owner must bring all required documents to the Vehicle Management Office, Motor Vehicle Registration Service Station, or Traffic Police Brigade to apply for a replacement. The environmental protection sticker is a classification sticker issued by the state to indicate the vehicle's emission standards, categorized into yellow and green types. It is issued after reviewing the vehicle type and emission standards, aimed at facilitating energy-saving and emission-reduction inspections as well as regular environmental checks for vehicles.

6

3

Share

What are the reasons for ineffective car brakes?

The reasons for ineffective car brakes are: 1. There are impurities in the brake master cylinder, and the seal is not tight; 2. The vacuum booster pump fails; 3. The brake oil is too dirty; 4. The brake master cylinder or wheel cylinder leaks oil; 5. The air storage tank or pipeline interface leaks air; 6. Severe overload; 7. The brake drum is carbonized; 8. The brake master cylinder lacks brake fluid; 9. The brake master cylinder piston is worn. Braking refers to the action of stopping or reducing the speed of running locomotives, vehicles, other transportation tools, or machinery. The methods to deal with brake failure are: 1. Turn on the warning lights to alert other vehicles; 2. Shift to a lower gear; 3. Pull over and slowly pull up the handbrake.

1

Share

How to Tell if a Car is Pulling to One Side?

The methods to determine if a car is pulling to one side are: 1. Observe the logo on the steering wheel; 2. Note the number of steering wheel rotations when parking; 3. Move the car slightly forward and backward after parking; 4. Lean out of the window to observe the tires. The basis for judging whether a car is pulling to one side is when the car is driving straight on a flat road, it naturally veers to one side, causing the line connecting the centers of the front and rear axles to not align with the centerline of the driving trajectory. The reasons for a car pulling to one side are: 1. Excessive wear on one side of the tires; 2. Damage to the ball joint or shock absorber; 3. Uneven tire pressure on both sides of the vehicle; 4. Deformation or poor performance of related components in the vehicle's suspension system.

6

1

Share

What is the fuel consumption of the Roewe ei6 hybrid?

Does the Suzuki Beidouxing have an automatic transmission?

What causes the drive shaft vibration in Haval H6?

Which Technologies in Lynk & Co are from Volvo?

How Many Stickers Should Be Affixed to a Motor Vehicle?

What are the reasons for ineffective car brakes?

How to Tell if a Car is Pulling to One Side?

How to Tell If a Car Battery Is Dead

What is the battery model of the Hyundai Elantra?

What car brands are from Germany?

How Long Can a Car Battery Last After Disconnecting the Negative Terminal?