What is the fuel consumption of the RAV4?

3 Answers
VanEliza
07/29/25 3:53am
The fuel consumption of the RAV4 ranges between 4.7L and 6.4L per 100 kilometers. The term 'fuel consumption per 100 kilometers' refers to the amount of fuel a vehicle consumes when traveling a distance of 100 kilometers at a certain speed, serving as a theoretical indicator for the vehicle. This measurement is obtained by manufacturers under controlled conditions, where a dynamometer installed on the vehicle's chassis records values converted into speed parameters. The vehicle is then driven at specified speeds to calculate the theoretical experimental fuel consumption data per 100 kilometers. The RAV4 is a compact SUV introduced by FAW Toyota, with dimensions of 4600mm in length, 1855mm in width, and 1680mm in height, and a wheelbase of 2690mm. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 126kw, and paired with a CVT continuously variable transmission.
Was this review help?
1
4
Share
JulianaFitz
08/12/25 3:18pm
As a RAV4 owner, I've been driving it for over two years now. The real-world fuel consumption is around 8-9 liters per 100 km in the city and about 6-7 liters on the highway, which is quite worry-free. Mainly used for daily commuting, the fuel consumption can be a bit higher in traffic jams, but as long as I don't stomp on the accelerator or brakes too hard and drive steadily, I can keep it under control. I check the tire pressure every week and keep it within the recommended range—keeping the tires properly inflated also helps save fuel. In cold weather, especially in winter when the air conditioning is used more frequently, the fuel consumption increases slightly. Overall, the RAV4's fuel efficiency is quite good among SUVs. For my 2.0L gasoline model, the monthly fuel cost is just over 300 yuan, which isn't too expensive. I recommend regular maintenance, like changing the engine oil and air filter, to keep the engine running smoothly and reduce unnecessary fuel waste. In the long run, I think the RAV4 strikes a great balance between practicality and economy.
Was this review help?
7
3
Share
Expand All
DeEloise
10/02/25 7:50am
From a technical perspective, the fuel consumption of the RAV4 depends on the specific configuration. The gasoline version typically has a combined fuel consumption of 8 to 10 liters per 100 kilometers, while the hybrid version is much more economical, averaging around 5 to 6 liters, and can even go below 5 liters in city driving. I particularly like the hybrid version because it switches between electric and gasoline power, relying on electricity at low speeds, which significantly enhances fuel efficiency. The matching of the engine and drivetrain is crucial; for example, the four-wheel-drive version consumes slightly more fuel, about 0.5 liters extra. High engine efficiency, such as in newer turbocharged models, ensures more stable performance on highways. Don’t forget factors like vehicle weight and aerodynamic drag—SUVs generally consume more fuel than sedans due to their shape, but the RAV4 is well-optimized. Other factors affecting fuel consumption include road conditions and load capacity; more luggage means more weight. Paying attention to these details can help in choosing the right model, and the hybrid version is definitely worth recommending.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What to do if the automatic transmission is stuck in P gear?

Solutions for automatic transmission stuck in P gear: 1. If the car has a shift lock gear lock, press the switch; 2. If there is no gear lock or the button does not work, you can pry open the shift dust cover, find the emergency switch of the shift mechanism, and press the switch. The correct method for parking and shifting gears: 1. Shift into N gear before parking; 2. Tighten the handbrake and then release the pedal; 3. After the car stops completely, shift into P gear. This way, the car will not slide forward or backward due to its own weight, avoiding the situation of the gear getting stuck when parking. Automatic transmission means that the driver does not need to manually shift gears. The vehicle will automatically select the appropriate gear to drive based on the speed and traffic conditions.
10
2
Share

What is the function of the button on an automatic transmission?

The function of the button on an automatic transmission: The button on an automatic transmission is called the shift lock button, also known as the gear lock. If the gear is accidentally engaged, unintended forward or backward movement could cause an accident. This button can eliminate safety hazards caused by misoperation. When shifting out of P (Park) or into R (Reverse) or P (Park), this shift lock button must be pressed to engage the gear. Introduction to automatic transmission gears: 1. P stands for Park; after the car stops, engaging P gear applies the brake to prevent movement. 2. N stands for Neutral; temporarily stopping the vehicle by engaging this gear stops the vehicle's motion without interrupting power. 3. R stands for Reverse; this gear can only be engaged when the vehicle is stationary. 4. S stands for Sport, suitable for overtaking and climbing hills.
16
2
Share

What is a Salvage Car?

Salvage cars refer to vehicles that have suffered damage from non-natural wear and tear accidents, resulting in decreased mechanical performance and economic value. The following scenarios classify a vehicle as a salvage car: 1. Vehicles where the engine compartment or passenger compartment has been damaged due to impact; 2. Vehicles where the rear quarter panel has been damaged by more than one-third due to impact; 3. Vehicles with welded, cut, reshaped, or deformed longitudinal beams; 4. Vehicles with welded, cut, reshaped, or deformed shock absorber mounts; 5. Vehicles with welded, cut, reshaped, or deformed A, B, or C pillars; 6. Vehicles where the airbags have deployed due to impact; 7. Vehicles with severe welding, cutting, reshaping, or deformation in other non-removable parts; 8. Vehicles where the body has been submerged in water exceeding half of its height, or where water has entered the passenger compartment.
14
3
Share

What are the classifications of windshield wipers?

Windshield wipers are divided into beam wipers and conventional wipers. Windshield wipers are important accessories installed on the windshield, and their function is to remove rain, snow, and dust that obstruct the view on the windshield glass. Windshield wipers play a crucial role in driving safety. Windshield wiper maintenance guide: 1. When using the wiper to remove dust from the windshield surface on a sunny day, be sure to spray windshield washer fluid and avoid dry wiping; 2. If there are other stubborn or hard contaminants on the glass, they should be cleaned manually; 3. When lifting the wiper blade during car washing or daily cleaning, hold the spine of the wiper and slowly return it, avoiding snapping the wiper blade back suddenly; 4. In winter, use an ice scraper to remove ice chips from the windshield surface first to avoid increasing the burden on the wiper.
4
2
Share

How to Renew a Driver's License in a Different Location?

Methods for renewing a driver's license in a different location: 1. Go to a photo studio with driver's license photography qualifications to take photos, obtaining a one-inch white background photo without a hat and a digital image collection system receipt; 2. Make a copy of your ID card and bring the original. If you are from another province, also bring your residence permit and a copy of it; 3. Go to the hospital designated by the vehicle management office for a physical examination, verify your ID, submit one photo, and obtain the motor vehicle driver's physical condition certificate to fill out and undergo the physical examination; 4. Go to the vehicle management office to get a number and queue up, receive a driver's license application form, and attach the photo; 5. When your number is called, submit the materials to the police at the vehicle management office, then wait a moment for the review; 6. After passing the review, you will receive a form to pay the fee. After paying, submit the form with the payment stamp back to the police.
17
0
Share

What does intermittent braking mean?

The meaning of intermittent braking is: first press the brake slightly, then release the brake (but not completely) when you feel the car decelerating significantly, and press the brake again when you feel the braking effect is about to disappear. Repeat this cycle. The applicable objects of intermittent braking: mostly used for large vehicles without ABS and with air brakes in the past, but the intermittent braking method will affect the smoothness and comfort of the vehicle. Small cars are lightweight, and if intermittent braking is not used for long downhill slopes, the wheel hubs will not overheat. It is not recommended to use intermittent braking for small cars to decelerate. The reason for using intermittent braking: because large vehicles are heavier, but air brakes respond faster than hydraulic brakes. To avoid locking the wheels and preventing the inability to steer, intermittent braking technique is adopted. The function of intermittent braking is: to prevent wheel lock-up, thereby controlling the vehicle from skidding.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.