···
Log in / Register

What is the fuel consumption of the Palisade?

3 Answers
LeEloise
07/29/25 8:56pm
The fuel consumption of the Palisade is 13L/100KM. Below are the specific reasons for high fuel consumption in vehicles: 1. Affected by temperature: Temperature fluctuations can cause variations in fuel consumption. In winter, lower temperatures generally lead to increased fuel consumption. 2. Lack of regular vehicle maintenance: Dirty engine oil and air filters can also result in higher fuel consumption. Contaminated oil reduces lubrication efficiency, increasing resistance in the engine's moving parts, which requires more energy to overcome, thereby raising fuel consumption. 3. Insufficient tire pressure: Low tire pressure increases the contact area between the tires and the road, leading to greater friction and driving resistance, which in turn increases fuel consumption. 4. Excessive carbon buildup in the vehicle: Carbon deposits can accumulate in the throttle body, fuel injectors, intake manifold, and piston tops. Excessive carbon buildup in any of these areas can cause incomplete combustion, resulting in higher fuel consumption.
Was this review help?
11
5
Share
Weston
08/15/25 6:45pm
As a long-term owner of the Palisade, I've noticed significant variations in fuel consumption depending on driving scenarios. In urban traffic congestion, fuel consumption tends to be higher, typically around 17-18 liters per 100 kilometers. During highway cruising, it drops to about 13 liters, with an overall average of approximately 15 liters. Factors affecting fuel efficiency include driving habits, road conditions, and load. Aggressive acceleration or carrying full loads will consume additional fuel. However, as a large SUV, it offers spacious and comfortable interiors, making it highly practical for family trips. I recommend regular maintenance of tires and the engine, maintaining proper tire pressure to slightly optimize fuel efficiency. The higher fuel consumption is offset by its powerful performance and sense of security, which I find well worth it.
Was this review help?
16
3
Share
Expand All
Gandalf
10/16/25 7:32am
I care about the environment and noticed that my Palisade has an average fuel consumption of 15 liters per 100 kilometers, with relatively high urban emissions. High fuel consumption means a larger carbon footprint, which is not eco-friendly. By improving driving habits, such as avoiding sudden braking, maintaining a steady speed, and using eco mode, you can save about 10% on fuel. Additionally, for daily commutes, prioritizing highway routes to avoid peak traffic times and maintaining the air filter can also help. Although the large body of the vehicle leads to higher fuel consumption, in the long run, developing good driving habits can reduce environmental impact.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

How to Deal with Intake Camshaft Position Fluctuation in Roewe 350?

Install a dial indicator in the thrust direction at the front end of the camshaft to measure whether the axial end clearance indicated by the dial when the camshaft moves forward and backward (axially) is normal. The limit value for camshaft end clearance is 0.1~0.2mm. If it exceeds this value, you can reduce the thickness of the spacer ring or replace the thrust collar. For fluctuations caused by a faulty camshaft position sensor, simply replace it with a new one. Check if the timing chain is loose, as a loose chain can cause gear misalignment, leading to camshaft fluctuation.
12
4
Share

How to Turn on the High Beam on a CRV?

Carry the key close to the car (within two meters) to unlock the door. After entering the driver's seat, gently press the one-touch start button to power on the vehicle and initiate self-check. On the lower left side of the steering wheel, there is a turn signal lever. The outer part is the headlight and position light switch. Turn the knob to the bottom position to turn on the headlights. The headlights turned on at this time are low beams. In this state, push the lever downward to activate the high beams. After turning on the low beams, pull the light control lever backward to momentarily activate the high beams, also known as flashing the high beams or alternating between high and low beams.
18
0
Share

How to Remove the Door Panel of an Old Jetta?

First, prepare the tools: one flat-head screwdriver, one Phillips-head screwdriver, and one T30 wrench. Unscrew the door handle counterclockwise, remove the inner door handle, pry open the plastic cover from below using the flat-head screwdriver, then loosen the two screws inside with the T30 wrench. Remove the three Phillips-head screws on the door edge; forcefully push open the locking clip of the handle frame (push outward toward the door), then push along the arrow direction to complete the removal. Forcefully remove the rearview mirror adjustment knob, unplug the control button wiring harness connector inside the Jetta door panel. Lift the door panel off the bracket. Forcefully pull open the clips to remove the door panel.
16
0
Share

What is the solution for oil burning in a 2015 Peugeot 408?

For a 2015 Peugeot 408 experiencing oil burning, you can increase the sealing between the engine pistons and cylinder walls by switching to a higher viscosity oil or regularly inspecting and replacing relevant oil system components. Symptoms of oil burning: Blue smoke during cold starts indicates minor oil burning. If you observe large amounts of blue smoke from the exhaust pipe, this signals significant engine oil burning. A very black exhaust pipe interior wall is another indicator. Preventive measures for oil burning: Use high-quality engine oil. Oil tends to corrode and degrade under prolonged high temperatures, thinning the oil film and making it easier to enter the combustion chamber. Using premium quality oil can significantly delay this phenomenon.
15
4
Share

How to route wires from outside to inside the car for Magotan B7?

Open the hood of the Magotan B7, locate the firewall on the partition between the hood and the driver's seat, and make a hole in the rubber plug, which serves as the passage for the wire harness. Open the glove box, find the fuse box of the Magotan B7 inside, where there will be spare fuse positions. Connect the external wire harness's fuse circuit to the spare fuse. After connecting the wires, organize the wire harness properly, cover it with protective caps, ensure waterproofing, and secure the wire harness in the appropriate position on the car using fastening clips. After debugging and confirming normal operation, seal the rubber plug wire harness hole with silicone sealant, remove any excess sealant, and finish with aesthetic treatment.
17
4
Share

What to Do If the Geely Vision Car Key Is Lost?

When taking delivery of the car, the 4S dealership will provide the owner with two keys, one of which is a spare key. If a key is lost, the first step is to locate and use the spare key. Call a professional locksmith company and request them to send a technician to assist with unlocking the car. You will need to provide identification documents such as an ID card and driver's license. Most 4S dealerships now offer emergency rescue services. Contacting the dealership will help get the car door opened and arrange for a new key to be made. The Geely Vision car key consists of a remote control and a mechanical key. Identical models are available for purchase online. After purchasing, the owner can follow the instructions to self-match the key.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.