What is the fuel consumption of the Oshan X5?

Why has the steering wheel of the Tiguan L become heavier?

Tiguan L steering wheel becoming heavier is most commonly caused by dirty power steering fluid. Like other automotive fluids, power steering fluid needs to be replaced periodically. Another possible cause is low tire pressure, which can also make the steering wheel feel heavier and may even lead to tire blowouts in severe cases due to insufficient pressure. Therefore, when experiencing heavier steering, first check the tire pressure and power steering fluid. Below is some information about the Tiguan L: 1. In terms of configurations, the 1.8T model (330TSI) comes standard with xenon headlights, automatic headlight activation, LED taillights, roof rails, a multifunction steering wheel, 4/6 split-folding rear seats, Clean-Air PM2.5 dust filtration, automatic rain-sensing wipers, keyless start, engine auto start-stop, an electronic parking brake with auto-hold function, rear parking sensors/camera, and heated exterior mirrors. 2. Higher trim levels of the Tiguan L feature an 8-inch central display with the second-generation MIB infotainment system, supporting CarPlay, handwriting input, and other functions.

20

5

Share

Do I Need to Register Modified Tail Lights?

It is best to register with the vehicle management office. If the modification of the tail lights is not approved by the traffic management department in advance, the vehicle cannot be driven on the road or pass inspections normally. According to the relevant provisions of the current "Motor Vehicle Registration Regulations," any changes to the body color, model, performance, purpose, or structure of a licensed motor vehicle, including the replacement of the frame, body, or engine, generally require an application for modification registration with the vehicle management office. Below is relevant information: National regulations on vehicle modifications stipulate that modification registration will not be approved under the following circumstances: changing the brand, model, or engine type of the motor vehicle, except for engines permitted by the national motor vehicle product authority; altering the registered appearance and technical data of the motor vehicle, unless otherwise specified by laws, regulations, or national mandatory standards. Inconsistency between the vehicle and the driving license: The appearance and license plate must match the driving license, and the lighting and brakes must comply with national standards to pass inspections. Strictly speaking, vehicles with excessively dark window tints may fail annual inspections, let alone modifications. Moreover, inconsistency between the vehicle and the driving license may also complicate insurance claims.

7

3

Share

What are the components of new energy vehicles?

New energy vehicles are composed of the following components: Electric drive system: Includes electronic controller, power converter, electric motor, mechanical transmission device, and wheels; Power system: Includes power source, energy management system, and charger; Auxiliary system: Includes auxiliary power source, power steering system, navigation system, air conditioner, lighting and defrosting devices, wipers, and radio. Pure electric vehicles: Pure electric vehicles are vehicles that use a single battery as the energy storage power source. They utilize the battery as the energy storage power source, providing electrical energy to the electric motor through the battery, which drives the motor to operate and thus propels the vehicle. The rechargeable batteries used in pure electric vehicles mainly include lead-acid batteries, nickel-cadmium batteries, nickel-metal hydride batteries, and lithium-ion batteries, which provide power for the vehicle. At the same time, pure electric vehicles also store electrical energy through the battery to drive the motor and ensure normal vehicle operation. Hybrid electric vehicles: Hybrid electric vehicles have a main drive system composed of at least two individual drive systems that can operate simultaneously. The driving power of hybrid electric vehicles mainly depends on the vehicle's driving state: one is provided by a single drive system alone, and the second is provided jointly by multiple drive systems.

10

0

Share

Is shifting from second gear to first gear just a direct push up?

Shifting from second gear to first gear is not just a direct push up. First, you need to press the brake to slow down. After slowing down, immediately release the brake and press the clutch, then quickly shift from second gear to first gear. Next, quickly lift the clutch pedal to the semi-engaged state. Once the clutch is engaged, gently release the clutch pedal. Matching speed with gear: The speed ranges for manual transmission gears are: 1st gear: generally around 10 km/h; 2nd gear: generally around 20 km/h; 3rd gear: typically used between 20 km/h and 40 km/h; 4th gear: between 40 km/h and 60 km/h; 5th gear: above 60 km/h. Precautions for gear shifting: While shifting gears, the clutch and accelerator must be coordinated well. Press the clutch all the way down, then immediately release the accelerator pedal, and quickly shift to the corresponding gear. After shifting, release your hand immediately and avoid keeping it on the gear lever for too long, as this can easily damage the gear lever.

2

5

Share

How to Reset the Maintenance Light on a Roewe 350?

Method to reset the maintenance light on a Roewe 350: 1. Turn off the ignition switch; 2. Press and hold the button on the center console marked with two arrows (up and down), then turn on the ignition switch; 3. After approximately 3 seconds with the ignition switch on, release the two-arrow button; 4. The maintenance menu will appear on the display, asking if you want to reset; 5. Press and hold the SET button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch, and the maintenance light will be reset. The Roewe 350 is a compact sedan positioned in the A-segment market by SAIC Motor. Taking the Roewe 350 2015 1.5L Manual Premium Edition as an example, its body dimensions are 4521mm in length, 1788mm in width, and 1492mm in height, with a wheelbase of 2650mm. In terms of power, the Roewe 350 2015 1.5L Manual Premium Edition is equipped with a 1.5L inline four-cylinder naturally aspirated engine, delivering a maximum power of 80kW and a maximum torque of 135Nm, paired with a 5-speed manual transmission.

6

3

Share

Is car film applied on the inside or outside of the car?

Car film is applied on the inside of the car because it won't be exposed to wind and rain, thus aging more slowly and extending its service life. Precautions for car film application: Before applying the film, protect the interior facilities by covering the seats and dashboard with plastic covers. During application, avoid using lubricants that may cause the film to fade, and do not apply the film under direct sunlight, as this can lead to wrinkling and bubbling, significantly affecting the appearance of your car. The cleaning of the glass is the foundation for a good application. Generally, there are three steps to cleaning the glass: inspecting for damage, removing adhesive particles and sand, and dusting and cleaning the glass (since water is used for dusting and lubrication, be careful to prevent water from leaking into the car's audio and electronic control systems, and ensure the glass is cleaned three times). When cleaning the rear windshield, take care not to damage the heating wires. Functions of car film: The functions of car film include blocking ultraviolet rays, reducing heat, and preventing injuries caused by sudden glass shattering. It also protects personal privacy due to the one-way visibility of the solar film. Additionally, it can reduce air conditioning energy consumption, enhance aesthetics, and, to some extent, help save fuel consumption.

6

1

Share

What is the fuel consumption of the Oshan X5?

Why has the steering wheel of the Tiguan L become heavier?

Do I Need to Register Modified Tail Lights?

What are the components of new energy vehicles?

Is shifting from second gear to first gear just a direct push up?

How to Reset the Maintenance Light on a Roewe 350?

Is car film applied on the inside or outside of the car?

What engine does the Familia use?

Where is the OBD port on Citroen C5?

What do B-segment, C-segment, and D-segment cars mean?

What is the sound of a car making a scraping noise?