What is the fuel consumption of the ns125d?

2 Answers
Smith
07/24/25 3:56am
The comprehensive fuel consumption of the ns125d per 100 kilometers is basically maintained at around 2.2L. Here is an introduction to the ns125d: Design: This car still adopts a compact design, with a wheelbase of 1246mm and a curb weight of 108kg. Such figures make this car relatively flexible and lightweight. In addition, the low center of gravity design also ensures good riding stability, coupled with the unique operating characteristics of a scooter. Power: To enhance competitiveness, the Honda NS125D uses the same powertrain as the Split Line 125, equipped with the Honda NSC engine and matched with the Honda PGM-FI electronic fuel injection system. The combination of the two greatly improves the performance of the car, but the fuel consumption is slightly inferior, with a fuel consumption of 2.2L per 100 kilometers.
Was this review help?
5
4
Share
BarrettLee
08/10/25 11:33pm
I have been riding motorcycles for over fifteen years, and the NS125D's fuel consumption is very economical. Official data shows an average fuel consumption of approximately 2.0 liters per 100 kilometers, thanks to its 125cc single-cylinder engine design, which incorporates advanced combustion technology to reduce waste. Key factors affecting fuel consumption include driving habits—smooth acceleration and maintaining a speed of 60-70 kilometers per hour can save up to 10% fuel, excessive weight and load can increase the burden, and road conditions can also impact the results. For daily use, I recommend regularly checking the oil level and cooling system to ensure the engine operates efficiently, which helps maintain long-term performance. Overall, this bike performs excellently for urban commuting, easily covering over 400 kilometers on a full tank, making it a reliable choice.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

What is the fuel consumption of the GLK300?

GLK300 fuel consumption is 13.35L/100km. Below is an introduction about automotive gasoline: Gasoline: Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from petroleum through distillation and cracking, used as fuel, appearing as a transparent liquid. Physical and chemical properties: At room temperature, gasoline is a mobile liquid ranging from colorless to light yellow, hardly soluble in water, flammable, with a distillation range of 30 to 205 degrees Celsius. It explodes upon contact with fire when the air concentration is between 74 to 123 grams per cubic meter. The calorific value of gasoline is approximately 44,000 kJ/kg (the calorific value of fuel refers to the heat produced by the complete combustion of 1kg of fuel).
13
4
Share

How to Reset the Fuel Cutoff Switch?

When a vehicle collision occurs, the equipped fuel cutoff switch activates to stop the fuel supply, preventing further hazards. After completing repairs and confirming there are no fuel system leaks, the fuel cutoff switch must be reset to restore fuel supply. The switch is located in the footwell space behind the left-side trim panel of the vehicle. Additional Information: Vehicle safety devices can be categorized into active safety and passive safety systems. Below are the relevant details: 1. Active Safety: Refers to any feature that enables the driver to effectively control the vehicle and avoid accidents under any condition. This includes indicator systems, lighting systems, stability systems, steering systems, braking systems, and collision warning systems. 2. Passive Safety: Refers to features that protect occupants and pedestrians during an accident, minimizing direct damage. These include safety body structures and occupant protection systems (such as seat belts, airbags, and collapsible steering columns).
13
5
Share

What does it mean when the car engine yellow light is on?

The reasons for the car engine yellow light being on: 1. Sensor issues: including water temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will trigger the engine fault light. 2. Maintenance issues: Poor engine maintenance is a cause of the engine fault yellow light. 3. Fuel and oil quality issues: The fuel added to cars usually has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers generally recommend which grade of fuel and type of oil to use. Failure to follow these recommendations over time can cause engine wear, triggering the fault light. 4. Poor combustion of the air-fuel mixture: Issues such as faulty spark plugs, ignition coils, fuel pump, or clogged fuel lines can all cause poor combustion of the engine's air-fuel mixture.
16
1
Share

What Causes the Trunk Door Latch to Make Noise?

The reason for the trunk door latch making noise: It may be due to cold weather causing the rubber seal to stick together. Other reasons: Frequently using the key to open the trunk can cause the linkage rod to disconnect, requiring a visit to the repair shop. If the trunk is always opened with the remote, the lock cylinder may be dirty or rusty. Spraying rust remover into the lock cylinder a few times can help open it. Mechanical component failure: The trunk wiring may be broken, or other trunk-related issues may prevent the car trunk from opening. It is recommended to visit a 4S shop for repair or replacement. Additionally, if the trunk wiring is broken or other trunk issues prevent the trunk from opening, the problem may be with the linkage rod or lock cylinder.
9
3
Share

What are the reasons for the conflict between CarPlay and the radio?

Here are the reasons and solutions for the conflict between CarPlay and the radio: Direct interruption of music: This situation can be resolved by selecting other mixing modes in the navigation settings. When using Gaode Map, you can choose the auxiliary function in the navigation settings within the settings, and set the mixing mode to "lower the music" to avoid directly interrupting the music sound. During navigation voice broadcasts, the music sound will be lowered. Navigation voice lowering the sound: To solve this situation, you need to turn off the navigation sound and not use voice navigation. Most navigation software can only set three modes: mute, lower the music, and pause the music, so there is no situation where the music sound and navigation sound play at the same volume.
7
5
Share

What are the reasons for CarPlay connection failure?

Possible reasons for CarPlay connection failure include damaged phone data cables; internal damage to the USB female port of the external USB HUB on the car's main unit; loose connections between the car's main unit and the external USB HUB, etc. Below is an introduction to CarPlay: CarPlay screen mirroring method: Locate the car's USB port, connect to the iPhone using the original Apple data cable, power on the car's system, turn on the multimedia screen, and click 'Allow' on the pop-up window on the iPhone. Introduction to CarPlay: CarPlay is an in-car system released by Apple Inc., seamlessly integrating users' iOS devices and iOS experience with the dashboard system.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.