What is the fuel consumption of the new Sail 3?

Do I need to turn on ETC every time?

ETC does not need to be turned on every time; it is generally required only during activation and top-up. ETC activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth is on." If it shows "Tag invalid" when inserted twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, you can press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth, open the corresponding mobile app (usually with a download QR code on the electronic tag), and enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation. ETC installation positions: For small vehicles such as cars and minivans, the ETC card and OBU device are installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle part.

11

4

Share

Where is the car fuse located in the vehicle?

Here are the locations of car fuses: 1. Since there are many electronic devices in a car, and each electronic device is equipped with an independent fuse, engineers design the vehicle to concentrate the fuses in one place for easier replacement and maintenance in the future. This place is called the fuse box. Generally, there are two fuse boxes in a vehicle, one located inside the engine compartment; the other is located on the left side of the steering wheel or inside the glove box. 2. The fuse box located inside the engine compartment is responsible for the normal operation of external vehicle electrical devices, such as headlights, horn, onboard computer, air conditioning compressor, windshield washer motor, etc., ensuring circuit safety. 3. The other fuse box, located on the left side of the steering wheel or inside the glove box, is responsible for the normal operation of internal vehicle electrical devices, such as power windows, cigarette lighter, electric seats, and airbags. Generally, the fuse box in the engine compartment is located on the driver's side, but some models may have it on the opposite side. However, fuse boxes are usually designed to be on both sides of the engine compartment for convenient and timely replacement.

14

4

Share

What does the yellow brake pad warning light on an Audi A8 mean?

The yellow brake pad warning light on an Audi A8 indicates that the brake pads need to be inspected, as they may be worn. Here are some specific details about the Audi A8: 1. Powertrain: The Audi A8 offers 14 models across 4 engine displacements. These include two models equipped with a 2.5L V6 FSI direct injection engine, derived from reducing the displacement of the 2.8 FSI; seven models equipped with a 3.0L V6 TFSI supercharged direct injection engine, available in two different power outputs; three models equipped with a V-8 4.0L V8 TFSI turbocharged direct injection engine; and two models equipped with the top-tier 6.3L W12 FSI engine. 2. Vehicle positioning: The Audi A8 is positioned as a luxury sedan, with a length, width, and height of 5268mm, 1949mm, and 1471mm respectively, and a wheelbase of 3122mm.

10

5

Share

What causes high low pressure and normal high pressure in the Audi C7's air conditioning system?

Audi C7 air conditioning system exhibiting high low pressure and normal high pressure is typically caused by a faulty or damaged expansion valve. Here are the specific details about the expansion valve: 1. Symptoms of a clogged expansion valve: When the car's air conditioning is turned on, it fails to cool properly. Measuring the pressure in the air conditioning lines with a pressure gauge will show excessively high high pressure and excessively low low pressure, indicating expansion valve failure. 2. Symptoms of a damaged expansion valve: The low-pressure pipe doesn't feel cold to the touch, the dryer and condenser may frost over, both high and low pressures become abnormal, and the high-pressure pipe temperature becomes irregular. 3. Function of the expansion valve: The expansion valve serves as a throttling device. High-temperature, high-pressure liquid refrigerant passes through the expansion valve's throttle orifice, becoming low-temperature, low-pressure mist-like hydraulic refrigerant, creating conditions for refrigerant evaporation.

11

0

Share

Is the car film applied on the inside or outside?

Automotive window film should be applied to the inside of the car glass. If applied to the outside, it is prone to erosion by wind and frost, leading to faster aging and reduced service life. The following are the functions of window film: 1. Automotive window film refers to applying a thin film-like substance to the front and rear windshields, side windows, and sunroof of a vehicle. This film is also called solar film or explosion-proof and heat-insulating film. 2. Its main functions are to block ultraviolet rays, partially block heat, and prevent injuries caused by sudden glass breakage. At the same time, based on the one-way perspective performance of the solar film, it achieves the purpose of protecting personal privacy. 3. In addition, it can also reduce the damage to items and people inside the car caused by ultraviolet radiation, and to some extent, achieve the effect of saving fuel consumption. 4. Reduce air conditioning energy consumption. Applying heat-insulating film can compensate for the loss of air conditioning cooling capacity, instantly lowering the temperature inside the car, thereby achieving a certain degree of fuel savings.

12

1

Share

Will the Audi A4L particulate filter get clogged?

Audi A4L particulate filters can get clogged. When the accumulated particulates reach a certain level, the particulate filter will automatically ignite to burn and expel them, which is known as the 'regeneration' process of the particulate filter. The general procedure for cleaning the particulate filter using cleaning equipment is as follows: First, remove the particulate filter and place it on the testing equipment. Then, use the probe on the equipment to check the clogging condition of the particulate filter. Next, preheat the cleaning equipment to 300°C, place the particulate filter inside, and adjust the temperature to 600°C for oxidation treatment of the carbon deposits. After the treatment is completed, cool the particulate filter and then use a high-pressure blowing tool for cleaning. Once the cleaning is done, use professional measuring equipment to record the data of the particulate filter. After completing the above steps, reassemble the particulate filter and install it back into the vehicle.

1

2

Share

What is the fuel consumption of the new Sail 3?

Do I need to turn on ETC every time?

Where is the car fuse located in the vehicle?

What does the yellow brake pad warning light on an Audi A8 mean?

What causes high low pressure and normal high pressure in the Audi C7's air conditioning system?

Is the car film applied on the inside or outside?

Will the Audi A4L particulate filter get clogged?

What items are required for BMW's second maintenance?

What are the differences between Audi's various series?

What are the precautions after car window tinting in winter?

What does Audi A6L30TFSI mean?