What is the fuel consumption of the new MG 6?

2 Answers
XavierLynn
07/24/25 5:51pm
The fuel consumption of the new MG 6 is 5.8-5.9L/100km. Here is an introduction to the new MG 6: 1. The all-new MG 6 is the first mass-produced model of SAIC MG's "Emotional Design" concept car MG E-Motion, officially launched on November 3, 2017. The new car is equipped with a "Multi-layer Health Protection System," which achieves a comprehensive filtration and sterilization effect of 99% through a "three-step strategy" of efficient filtration, bacterial inhibition, and bacterial elimination, realizing "N99-level" in-vehicle air quality safety and providing high-standard safety protection for passengers. 2. Featuring a high-definition touchscreen and the "Internet Intelligent Driving" system, the all-new MG 6 is positioned as a "luxury internet performance sedan." The new car also adopts a fastback design, with external dimensions of 4695/1848/1462mm in length, width, and height, and a wheelbase of 2715mm. It is powered by SAIC's Blue Core 1.5T turbocharged engine, offering a "6-second-level powertrain and 36-meter-level braking system." 3. Equipped with SAIC's NetBlue Blue Core high-efficiency powertrain technology, the all-new MG 6 comes with a "6-second-level powertrain and 36-meter-level braking system" and a standard XDS Cornering Dynamic Control System across the lineup. The in-car interaction of the third-generation MG 6 will focus on more intelligent multi-screen linkage + voice control, which is both cool and practical, attracting young people who are keen on cutting-edge technology.
Was this review help?
20
0
Share
McTalia
08/11/25 9:55am
I think the fuel consumption of the new MG6 is quite reasonable. I've been driving this car for over half a year now. In city driving at slower speeds, it's around 9L/100km, and on the highway, it can easily drop to 6.5L/100km. The car has strong power but the fuel consumption isn't too high. I usually prefer to set the driving mode to economy and use cruise control to maintain a steady speed, which helps save some fuel. When it's hot and the air conditioning is on, the fuel consumption rises to about 10L, so I recommend using ventilation more often instead of the AC. Another tip is not to overload the trunk—traveling light helps reduce fuel consumption. Driving habits are crucial; sudden braking and rapid acceleration can cause fuel consumption to spike. Developing smooth driving habits has saved me several hundred yuan in fuel costs each month. Overall, the new MG6 does a good job with fuel consumption among sports sedans, making it a comfortable choice for working professionals like me.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

Are the Bumpers at 4S Stores Genuine?

Under normal circumstances, if you request a 4S store to install a genuine bumper, the store is usually required to use original equipment manufacturer (OEM) parts. Here are the relevant details: 1. The advantage of OEM bumpers lies in their toughness; even under high pressure, they are unlikely to deform. 2. Bumpers available in the market are generally categorized into OEM and aftermarket types. OEM bumpers are supplied directly by the original manufacturer, while aftermarket bumpers are typically produced by third-party manufacturers. 3. Since OEM bumpers are supplied directly by the manufacturer, they naturally offer better quality assurance. Although they may be more expensive, bumpers are, after all, a critical safety component.
7
2
Share

What does cruise mean?

In automobiles, cruise refers to the cruise control system. When a car is driving steadily on the highway, the driver can use this function to maintain the current speed for constant-speed driving. After activating this function, the driver no longer needs to control the accelerator pedal, making it a highly practical feature. How cruise works: The cruise control system operates by having the cruise control module read the pulse signal from the vehicle speed sensor and compare it with the set speed, then issuing commands to the servo mechanism to mechanically adjust the throttle opening, either increasing or decreasing it, to keep the vehicle at the preset speed. Electronic multifunction cruise control eliminates the mechanical control parts of the cable-type cruise control, adopting precise electronic control for more accurate operation and avoiding the risk of mechanical failure. Components of cruise: The cruise control system consists mainly of a control switch, control module (cruise computer), and servo (actuator) in the case of cable-type cruise control. The working principle of the cable-type cruise control system involves the cruise control module reading the pulse signal from the vehicle speed sensor and comparing it with the set speed to adjust the throttle opening, either increasing or decreasing it, to maintain the vehicle at the preset speed. For example, when the vehicle is going uphill and the speed drops, the pulse signal from the speed sensor decreases, and the control module will command the servo actuator to open the throttle to a corresponding angle to maintain speed. Conversely, when going downhill, the throttle opening will be reduced.
16
2
Share

What are the reasons for wiper blade noise?

Loud noise when the wiper is activated is mainly caused by: 1. The spring of the wiper arm being too tight. 2. Excessive wear on the friction surface of the wiper blade. 3. The friction surface of the wiper blade being uneven or deformed. 4. Solutions: (1) If the spring of the wiper arm is too tight, the solution is to slightly stretch the spring. (2) If the wiper blade is worn or the friction surface is uneven or deformed, it is recommended to replace the wiper blade. (3) You can check if the frame holding the rubber strip of the wiper is slightly bent.
11
0
Share

Does the car radiator need cleaning?

Car radiators do need cleaning. Here are the relevant steps: 1. Ensure the engine is cool and turned off. 2. Open the drain plug at the bottom of the radiator to let the coolant flow into a bucket. The coolant should be properly disposed of to avoid environmental harm. 3. Close the drain plug and fill the radiator with water. 4. Start the engine, turn on the heater control system (this will open the heater control valve), add cooling system cleaner, and let the engine idle for 30 minutes (or follow the instructions on the cleaner bottle). 5. Turn off the engine and let it cool for 5 minutes. Drain the liquid from the radiator. 6. Close the drain plug, fill the radiator with water, and let the engine idle for 5 minutes. Then refill with a 50/50 mixture of water and ethylene glycol antifreeze/coolant (use the same type of coolant previously used in the car).
2
3
Share

How to Check the Manufacturing Date of a Tire?

On one side of the tire, there is usually a DOT marking. The tire manufacturing date code format is as follows: the first two digits indicate the production week, and the last two digits indicate the production year. Below is related information about the functions of tires: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque to ensure good adhesion between the wheel and the road surface, improving the car's power, braking, and passability; work together with the car suspension to mitigate impacts during driving and dampen resulting vibrations. 3. Prevent severe vibrations and early damage to car components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.
10
0
Share

How to Solve the Problem of Vehicle Pulling to One Side?

If a large vehicle is pulling to one side, it is necessary to measure the toe-in, correct the camber angle, inspect the kingpin, and perform tire rotation to resolve the issue; if a small car is pulling to one side, generally performing a four-wheel dynamic balance can solve the problem. Below are the relevant details: 1. Vehicle pulling refers to the phenomenon where a car, while driving straight on a flat road, automatically veers to one side, causing the line connecting the centers of the front and rear axles to not align with the centerline of the driving trajectory. 2. In mild cases, pulling can cause tire wear and tire scrapping, while in severe cases, it can lead to dangerous situations such as tire blowouts and loss of vehicle control. 3. There are many reasons for vehicle pulling, and generally, the following faults can cause it: unequal tire pressure on both sides, incomplete separation of the front brake, and failure of the front spring.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.