What is the fuel consumption of the new Hongqi HS5?

2 Answers
SanElena
07/28/25 11:56pm
The comprehensive fuel consumption of the new Hongqi HS5 is approximately 10.7 liters per 100 kilometers, which indicates relatively good fuel efficiency for this vehicle. The Hongqi HS5 is equipped with a 2.0-liter turbocharged engine across all variants, delivering a maximum power of 165 kW and a maximum torque of 340 Nm. Factors affecting fuel consumption are as follows: 1. Rough roads increase fuel consumption: Driving on congested or uneven roads for extended periods in lower gears will inevitably increase fuel consumption. 2. Overloading the trunk raises fuel consumption: Using the trunk as a storage space and filling it with unnecessary items increases the vehicle's weight. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in vehicle weight can lead to a corresponding percentage decrease in fuel consumption.
Was this review help?
13
5
Share
EzraMarie
08/12/25 4:14am
I've been driving the new Hongqi HS5 for two months now, with an average fuel consumption of about 8.5 to 10L per 100 km under combined conditions. In city traffic jams, it might rise to 11L, but on highway cruising, it can drop to around 7L, which is related to driving habits. I usually try to avoid sudden acceleration and braking, and use cruise control more often, so the fuel cost is relatively manageable. The new car's engine has been optimized, making it slightly more fuel-efficient than the old model, but the SUV's weight is considerable, and using air conditioning increases fuel consumption by one or two liters. It's advisable to consider daily road conditions before purchasing; if you drive mostly in the city, budget more for fuel. Regularly checking tire pressure and maintenance can also help save fuel. Overall, the fuel consumption feels reasonable and suitable for family trips.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

What does TCS mean in a car?

TCS stands for Traction Control System. TCS greatly enhances the stability of a car. When driving on slippery roads, a car without TCS is prone to wheel spin during acceleration. If the rear wheels spin, it can cause the car to fishtail; if the front wheels spin, the car's direction may become uncontrollable, leading to a drift to one side. Here is more information about TCS: 1. The TCS system is enabled by default on most vehicles, but the owner can turn it off based on actual conditions. When the traction control system is turned off, the system will not limit wheel spin, and the driving style should be adjusted accordingly. 2. The role of the TCS system is to ensure the car obtains optimal traction under various driving conditions, so it is best to keep it enabled unless there are special circumstances.
17
2
Share

How to Deal with Car Jerking When Accelerating?

Methods to deal with car jerking when accelerating: 1. The main cause of the issue is the accumulation of carbon deposits in components such as the throttle body, intake manifold, and valves. These deposits absorb some gasoline when the engine is cold. Once the engine warms up, the gasoline evaporates, leading to an overly rich air-fuel mixture during idle, which results in unstable idle speed. 2. It is necessary to inspect not only the throttle body and idle control valve but also the carbon deposits and dirt in the intake manifold. Excessive buildup can alter the cross-sectional area of the air passage, preventing the control unit from accurately regulating the idle air intake. This can cause the air-fuel mixture to become too rich or too lean, leading to abnormal combustion and engine jerking. 3. Additionally, it is important to check if the carbon canister is malfunctioning.
1
3
Share

What to do if the ETC falls off?

ETC needs to be reinstalled and reactivated if it falls off. The installation process for the ETC device is as follows: Upon receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. The red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the protective film on the back of the OBU and stick it to the installation location. Press firmly for 2-3 minutes to remove air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield. The chip should be inserted into the OBU device. Method to activate the ETC device: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing the card twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on the top of the electronic tag to enable Bluetooth. Turn on Bluetooth on your phone and open the corresponding mobile app (usually a QR code for downloading is provided on the electronic tag). Enter the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. After successful connection, upload a photo of the vehicle's front to complete activation.
18
3
Share

What Causes the Sound of Water Sloshing When Driving?

Causes of water sloshing sounds inside the car: 1. The sound of circulating water from the water pump, which is a normal phenomenon. 2. The drain holes at the bottom of the doors are blocked by mud or sand, causing rainwater to accumulate inside the door and unable to drain. This results in water sloshing sounds when braking or driving on uneven roads. 3. A clogged air conditioning drain hole can cause water accumulation in the evaporator box, leading to water sloshing sounds while driving. When water enters the door and remains trapped in a sealed space for a long time without evaporating, it produces sloshing sounds. Car owners should promptly check the drain holes inside the doors to prevent them from getting clogged.
9
4
Share

What Causes Engine Misfire?

The causes of engine misfire are as follows: 1. Insufficient cylinder pressure due to excessive wear of engine cylinder liner and piston rings, improper closing of intake and exhaust valves, or leakage of valve stem seals, resulting in misfire. 2. Poor fuel atomization caused by injector wear, leading to increased or decreased fuel injection, or even no fuel injection, resulting in misfire. 3. For high-pressure common rail engines, misfire may also occur due to issues with the engine control unit (ECU). The symptoms of misfire are as follows: 1. Severe engine vibration. When one or more cylinders are not working, the engine's balance is disrupted. When the crankshaft reaches the point where a cylinder should be firing to provide power, the lack of combustion causes a drop in RPM, leading to unstable engine speed and vibration. 2. Uneven and intermittent engine power output, causing RPM fluctuations. In addition to feeling the engine vibration, this can also be observed on the tachometer, where the needle will continuously fluctuate up and down.
1
1
Share

Will It Be Harmful If the Chassis Gets Scratched?

The extent of impact depends on the specific situation. The car chassis itself has a certain impact resistance. If it is only a minor scratch, it usually does not affect the vehicle's performance. However, if the vehicle chassis is scratched by hard and sharp objects such as rocks or sharp tools during high-speed driving, it may cause damage to the chassis steel plate, resulting in dents, deformation of the suspension structure, or even damage to the steering mechanism, which can be very serious. Below is some related information about the car chassis: 1. If the chassis is not well maintained, issues such as vague steering, oil leakage, and loosening of the overall structure may occur, posing safety hazards. 2. The chassis system is densely packed with pipelines and also houses key components such as the transmission and engine. If possible, it is advisable to install a chassis guard plate for the vehicle.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.