What is the fuel consumption of the new Buick GL8?

1 Answers
McDiana
07/30/25 3:32am
The fuel consumption of the new Buick GL8 is 7.8L-12.2L/100km. New Buick GL8: In terms of power, the all-new Buick GL8 is equipped with a 2.4L engine and a 3.0L SIDI V6 engine. The 3.0L engine delivers a maximum power of 190kW (258 horsepower) at 6800rpm and a peak torque of 296Nm at 5600rpm, paired with a 6-speed automatic transmission. Fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when driving at a certain speed over a distance of 100 kilometers. It is a theoretical indicator for vehicles. The fuel consumption per 100 kilometers is measured by manufacturers in an objective environment using a dynamometer installed on the vehicle's chassis. The obtained values are converted into speed parameters, and then the vehicle is driven at specified speeds to calculate the theoretical experimental fuel consumption data per 100 kilometers for the model.
Was this review help?
5
4
Share
More Forum Discussions

What to Do If the Car Paint Gets Scratched a Little?

The methods to repair slightly scratched car paint are: 1. Minor body scratches: If the scratch is only superficial and not deep, it can be repaired by waxing; 2. Damage to the topcoat: If the scratch is deeper and part of the topcoat has been scraped off, but the primer and body are not damaged, you can restore the paint by touching it up yourself. The simplest and quickest method is to purchase a touch-up paint pen and follow its instructions for application; 3. Damage to the primer or even body deformation: In this case, the scratch is very severe. If not treated promptly, it may lead to rust. To repair the primer and body deformation, the affected area's paint must be sanded off, followed by bodywork repair, and finally, repainting with all layers of paint.
1
2
Share

How to Check Tire Pressure on Volkswagen Tharu?

Volkswagen Tharu is equipped with a passive tire pressure monitoring system, which only displays alerts on the dashboard when abnormal tire conditions are detected. The system does not show specific pressure values, but only indicates which tire has an issue. Tire pressure, strictly speaking, refers to the air pressure inside the tire. In automotive maintenance, the engine is considered the heart of the car - engine failure leads to the end of a vehicle's lifespan, while tire pressure acts as the car's blood pressure. The level of tire pressure plays a crucial role in the performance and power of the vehicle. The Volkswagen Tharu is built on Volkswagen's MQB A1 modular platform, with body dimensions of 4453mm in length, 1841mm in width, and 1632mm in height.
7
3
Share

How Long Can New Tires Be Stored Without Use?

New tires can be stored unused for four years, with a maximum of five years. Tires are wear-prone components, and car tires are the only parts in contact with the ground. If a new tire remains unused, it can be stored for up to five years. Beyond this period, even if the tire appears new, it should not be used because the internal structure of the tire has aged, which is not visible to the naked eye. To extend the storage life of tires, they should be kept in a cool, dry place, avoiding excessive indoor ventilation, and kept away from heat sources, electrical equipment, flammable materials, oils, and acid-base compounds. If tires are stored vertically, it is advisable to rotate them periodically to change the stress points and prevent deformation.
1
2
Share

What is the purpose of adding antifreeze?

The functions of adding antifreeze are: 1. Automobile antifreeze, also known as coolant, is primarily used for cooling purposes, which is its fundamental role; 2. During vehicle operation, the engine operates at high temperatures. If the engine continues to work under high temperatures, it can lead to severe damage or even complete failure in a short period; 3. When antifreeze is added to the cooling system, the engine's heat is transferred through the cooling system. The heat is reduced before being dissipated into the surroundings, thereby cooling the engine and preventing overheating. Antifreeze has a higher boiling point compared to water, making it less likely to cause overheating in summer. Additionally, antifreeze does not corrode the engine's cooling system; instead, it provides anti-corrosion and rust-removal functions. High-quality antifreeze is made with distilled water and contains anti-scaling additives, which not only prevent scale buildup but also help remove existing scale.
6
5
Share

What brand is the Forester?

The Forester is a vehicle from the Subaru brand. It combines the distinctive features of a multi-purpose sports vehicle and a passenger car, developed under the concept of 'both in one.' Its chassis is essentially the same as the 1993 Legacy Outback, representing a completely revamped model. In terms of body dimensions, the Forester measures 4560mm in length, 1780mm in width, and 1700mm in height, with a wheelbase of 2615mm. Exterior-wise, the Forester is more stylish and dynamic, with its previously rugged appearance becoming relatively more subdued. The rear design of this car is simple yet practical, with a few straightforward and bold lines outlining the entire rear design.
16
1
Share

How to Fasten the Rear Seat Seatbelt in a Car?

In the rear seat seatbelt system, the side seatbelts are actually the same as the front seat seatbelts. Pull out the seatbelt, with the shoulder strap crossing the chest cavity and the lap belt snug against the hip bones, then insert it into the buckle. The rear seat seatbelt buckles are located in the gap between the seat cushion and the backrest. If you can't find them, it's likely that the buckles were not exposed when the seat covers were installed. Generally, the middle rear seat seatbelt is located at the rear roof of the car, where you can see two different types of buckles. There are also two different types of sockets in the middle position, one on the left and one on the right. To use it, pull down the hanging buckle connected to the seatbelt from the rear roof, diagonally across the front chest, and first insert the buckle into one of the corresponding sockets. Then, insert the other buckle connected to the seatbelt across both thighs into the other socket to complete the process.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.