What is the fuel consumption of the Mondeo?

1 Answers
CatherineFitz
07/29/25 9:15pm
The comprehensive fuel consumption of the Mondeo is 7.3L/100km. There are currently 2 models of the Mondeo on sale: the Luxury and Fashion models, both with a comprehensive fuel consumption of 7.3L/100km. The above figures are based on the NEDC comprehensive fuel consumption test, which measures fuel consumption under standardized driving conditions. Real-world fuel consumption is higher, ranging from 9.63-12.03L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon buildup in the engine is a major cause, often due to using inappropriate fuel. It is recommended to add a certain amount of fuel cleaner when refueling. If the effect is not noticeable, it indicates significant carbon deposits in the engine. In such cases, the vehicle should be taken to a 4S shop for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor: As an internal control unit in the car, the oxygen sensor monitors the air-fuel ratio in the engine. If it fails, it can disrupt the air-fuel ratio, leading to a sudden increase in fuel consumption. A faulty oxygen sensor will cause the exhaust pipe to emit darker-colored emissions during driving, and the sensor should be replaced immediately. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced periodically. If left unchanged for too long, they become dirty and can send incorrect signals to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, older vehicles may experience various faults over time.
Was this review help?
12
0
Share
More Forum Discussions

Can 4S shops perform dent repair?

4S shops can perform dent repair, and the paint baking uses original factory colors for more reasonable matching, with superior metalworking techniques. Automotive dent repair involves restoring the dented areas of the car's paint surface to their original condition. Generally, automotive dent repair can restore sharp-angle and obtuse-angle dents to their original state. Primarily, dents without paint chipping can be fully repaired, hail dents are repairable, while edges and AB pillars are more difficult to fix. Below is an introduction to 4S shops: 1. Introduction to 4S shops: 4S shops, fully known as automobile sales service 4S shops, are automobile sales enterprises that integrate vehicle sales, spare parts, after-sales service, and information feedback into one. 2. Services of 4S shops: The core competitiveness of automobile 4S shops lies in winning customers with high-quality services. At automobile 4S shops, consumers can access all value-added services regarding automobile information, market trends, after-sales service, maintenance instructions, and spare parts supply. Both complete vehicles and spare parts are guaranteed to be original factory products, relieving consumers of any concerns about after-sales service, repairs, and maintenance.
4
5
Share

Can Auto Hold Be Installed Afterwards?

Auto Hold is difficult to install aftermarket due to the complexity involved, as it requires extensive disassembly and is a systemic configuration. The key challenge is finding a suitable retrofit kit for installation. Here is some additional information: 1. Auto Hold is an automatic braking function: Auto Hold refers to an automatic braking feature that, when activated (e.g., while stopped at a traffic light), eliminates the need to pull the handbrake, simplifying operations by avoiding the use of manual or electronic parking brakes. For automatic transmission models, it also reduces the need for frequent shifting between D to N or D to P. This system is already common abroad, but currently, only two models in China are equipped with it: the Mercedes-Benz B-Class and the Lexus LS. 2. Principle: Radar sensors around the vehicle measure the distance and angle between the car and surrounding objects. The onboard computer then calculates the operational process and adjusts the steering wheel rotation based on speed. The driver only needs to control the speed. In the coming years, more high-end imported cars will likely include this feature as standard, and it may even appear in domestic models. This shouldn’t be surprising, as the system is not overly complex.
4
2
Share

Is the Car Air Conditioning Evaporator Prone to Damage?

Car air conditioning evaporators are not prone to damage. Here is some relevant information about car air conditioning evaporators: 1. Precautions: It is recommended to clean the car air conditioning evaporator once a year. The evaporator is located inside the dashboard. When the air conditioning is turned on, a large amount of condensation forms on the surface of the evaporator. At the same time, outside air entering the system may carry various dust particles, bacteria, and impurities. These substances, along with the condensation, can adhere to the surface of the evaporator. If not cleaned regularly, this can lead to damage over time. 2. Cleaning Methods: (1) Disassembly cleaning. (2) Traditional air conditioning foam cleaner cleaning. (3) Visual evaporator cleaning.
6
0
Share

Can New Energy Vehicles Have Additional Batteries Installed?

It is not recommended because the configuration of an electric vehicle's battery pack is based on design principles. The arrangement of the battery pack, typically located at the front, rear, or center of the vehicle, is carefully considered for balance, braking, and speed. Modifications are not advised, especially since the controller is also matched to the original setup. 1. Vehicles with swappable battery configurations: If the vehicle was initially designed with a battery pack that can be replaced, it is possible to enhance the range by swapping the battery pack later. 2. Increasing battery capacity by adding battery packs: This method of extending range involves connecting an additional battery pack in parallel to the existing one. If no more battery cells can be added inside the original battery pack, the only option is to connect an external battery pack in parallel. While this is theoretically feasible, it presents certain technical challenges and risks from an engineering perspective.
16
1
Share

How many kilometers should a new car drive before the second maintenance?

Generally speaking, the second maintenance for a new car is recommended at around 10,000 kilometers or one year of driving, which means it is approximately 5,000 kilometers or six months after the first maintenance. Of course, for some car models where the first maintenance is later, such as at 8,000 kilometers or 10,000 kilometers, the second maintenance will also be delayed accordingly. 1. Maintenance items: This involves the inspection and maintenance of dozens of items across multiple systems, including the engine, transmission, air conditioning system, steering system, braking system, suspension, body, and tires. The key items are still changing the engine oil and oil filter. 2. Possible damages from exceeding maintenance limits: Dirty oil can affect lubrication and increase wear; minor faults that are not detected and fixed in time can lead to potential accidents; increased fuel consumption and emissions.
3
4
Share

What causes the no signal issue in Mondeo's reversing camera?

The reasons for no signal in Mondeo's reversing camera are as follows: disconnection or poor contact of the data cable connected to the reversing camera, damage to the reversing camera itself, or a faulty gear position sensor causing no signal display. First, try restarting the reversing camera to observe the situation. Additionally, electromagnetic interference from other electronic devices in the car could be the cause - try turning off the radio or music player before restarting. Extension: The reversing camera is also known as a parking assist system, reverse visual system, or onboard monitoring system. English name: vehicle-backup-camera. This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. Before reversing, first clearly observe the situation behind the vehicle, estimate the reversing path, and determine the route during the reversing process. Try to avoid accelerating while reversing and control the speed to prevent it from being too fast.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.