What is the fuel consumption of the Mitsubishi Outlander 2.4 4WD?

Which of the three lines should be pressed on the ramp for positioning?

The three lines on the ramp for positioning are solid and dashed lines, with the solid line in the middle. You need to press this solid line. The hill start is one of the items in the driving license subject two test. The hill start project requires starting from the bottom of the slope and then driving to the designated position to stop. According to the relevant regulations of the test, for the positioning stop, the front bumper of the car must be pressed to the designated solid line position. If the front bumper is not pressed to the stop line after the vehicle stops, 10 points will be deducted, but it will not be considered as a failure. There are three lines in the parking area, namely dashed line, solid line, and dashed line, with a 50 cm interval between these three lines. If the vehicle stops exactly on the solid line position, no points will be deducted. If it stops on the dashed line position, 10 points will be deducted. During the test, if you want to press the solid line, a practical method is to observe the car's rearview mirror. The lower edge of the rearview mirror and the middle solid line will be on the same straight line. If you see the lower edge of the rearview mirror aligned with the middle solid line when parking, the front bumper of the car should be located on the middle solid line.

15

1

Share

Is Right Turn on Red Considered Running a Red Light?

It depends. Some red lights prohibit right turns, requiring vehicles to stop behind the stop line and wait until right turns are permitted. If there is no prohibition on right turns, vehicles can turn right even when the red light is on, provided they do not interfere with pedestrians or vehicles from other directions. According to the relevant regulations of the "Road Traffic Management Regulations of the People's Republic of China": In the absence of special traffic instructions (such as traffic signs or police instructions), motor vehicles can turn right at a red light without it being considered a violation of running a red light. If there is a traffic sign prohibiting right turns when the red light is on, motor vehicles cannot turn right when encountering a red light. Note: At intersections with signs prohibiting right turns, vehicles must stop when the red light is on. Turning right in such cases is equivalent to running a red light. According to the latest 2013 version of traffic regulations, driving a motor vehicle in violation of traffic signals results in a 6-point penalty. To determine whether a vehicle has run a red light, electronic monitoring needs to capture three photos: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. If the right turn signal is a red arrow, the vehicle should stop behind the stop line and wait for the green light before proceeding. Turning right on a red arrow is considered running a red light. If the right turn signal is not a red arrow, right turns are permitted. Right Turn Precautions: While driving, plan and judge the route: Vehicles intending to turn right at the next intersection should enter the right-turn lane in advance. Generally, the rightmost one or two lanes are designated for right turns, as indicated by signs and road markings. Before entering the right-turn lane, remember to signal and observe the traffic behind. Right-turn lanes generally do not require stopping at red lights, allowing right turns as long as it is safe, except at intersections with specific right-turn signals where drivers must wait for the green light. During the right turn, always follow traffic rules: signal the right turn, slow down, and proceed with caution.

14

1

Share

Can Insurance Cover 70% of the Cost if the Transmission is Broken?

If the transmission is broken due to a car accident or unexpected collision, the insurance company can cover 70% of the cost. However, if the damage is caused by quality issues or improper use, the insurance company will not be responsible for the compensation. In such cases, you should negotiate with the car manufacturer. If the insured vehicle suffers damage within the scope of the insurance coverage due to an accident, the insurance company shall compensate according to the terms of the insurance contract. If the vehicle has not been involved in a collision and the transmission is damaged, the issue lies with the manufacturer, and it should be resolved by contacting the 4S shop.

3

Share

Does Driving a New Car on the Highway Have Any Impact?

Driving a new car on the highway does have some impact, but the effect is minimal and will not affect the normal use of the vehicle. Many car owners believe that new cars in the break-in period should not be driven on the highway because high-speed operation of the engine can cause significant mechanical wear inside the engine. The engine oil in a new car tends to contain more metal particles, and using this oil with a high amount of debris for highway driving can increase engine wear. In severe cases, it may lead to irreversible damage, potentially preventing the vehicle from reaching its optimal performance after the break-in period. It is recommended that owners allow their new cars to go through a proper break-in period after purchase. If highway driving is necessary, the vehicle's speed should be kept within a reasonable range, avoiding excessively high RPMs or speeds to prevent engine damage.

20

4

Share

What is the difference between DC and AC igniters?

The differences between DC and AC igniters are as follows: 1. Power supply method: AC igniters are powered by the stator coil of a magneto, while DC igniters are powered by a battery or rectifier. You can determine whether it is an AC or DC igniter by checking whether the power supply line to the igniter comes from the magneto or the battery. 2. Shutdown method: AC igniters shut down by short-circuiting the ignition signal line to ground. The igniter has a shutdown wire connected to the shutdown switch, and closing the shutdown switch grounds and shorts the circuit to shut down. On the other hand, DC igniters shut down by cutting off the DC power supply, which is achieved by closing the shutdown switch to disconnect the power.

12

1

Share

How many seats does the Haval F7 have?

Haval F7 is a five-seater model. The Haval F7 is a compact SUV launched by Haval Motors. To meet the diverse needs of consumers, this car offers seven different versions. The Haval F7 is the first flagship model developed by Haval with a global perspective. Below are some key features of the Haval F7: 1. In terms of appearance, the Haval F7 continues the classic design of the current model. The front of the car features a hexagonal grille paired with sleek, elongated headlights, giving the front a more imposing look. 2. The side profile of the car adopts a multi-waistline design, creating a sense of layering. The window frames are decorated with chrome trim, and the black side skirts paired with 19-inch smoked black wheels further enhance the sporty feel of the vehicle.

18

4

Share

What is the fuel consumption of the Mitsubishi Outlander 2.4 4WD?

Which of the three lines should be pressed on the ramp for positioning?

Is Right Turn on Red Considered Running a Red Light?

Can Insurance Cover 70% of the Cost if the Transmission is Broken?

Does Driving a New Car on the Highway Have Any Impact?

What is the difference between DC and AC igniters?

How many seats does the Haval F7 have?

How is the National Day free expressway period calculated?

What is the process for handling traffic violations by someone other than the vehicle owner?

Will stopping in the middle of the road at a red light result in penalty points?

Can I renew my driver's license in a different location through 12123?