What is the fuel consumption of the Mitsubishi Outlander?

2 Answers
DeIsabelle
07/30/25 1:05am
The average fuel consumption of the Mitsubishi Outlander is 9.47L/100km. Here are some tips to reduce fuel consumption: 1. Change fluids on time: Many car owners neglect the replacement of engine oil and transmission fluid during vehicle use. Failure to change these fluids can lead to more noticeable car vibrations, slower gear shifting, and obvious jerking symptoms. 2. Pay attention to carbon buildup: Carbon buildup can cause uneven ignition, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires. Remember to clean carbon deposits regularly. Do not keep the engine RPM too low for extended periods to save fuel—don't hesitate to step on the accelerator.
Was this review help?
4
1
Share
DelZachary
08/15/25 6:36am
I've been driving the Mitsubishi Outlander for over a year, mainly for daily commutes and weekend getaways. In frequent city driving, the fuel consumption is around 12L/100km, and can rise to 14L in traffic jams. On highways, maintaining a steady speed reduces it to 9L, which is more economical. There's a significant difference between the new and old models; mine is the 2022 version, which is 2L more fuel-efficient than the 2018 model. I recommend driving gently, avoiding hard acceleration, and regularly changing the engine oil and air filter, which can save hundreds on fuel annually. Keep tire pressure around 2.4; too high or too low increases fuel consumption. As a family SUV, the Outlander's fuel consumption is reasonable, with spacious and practical interiors. A full tank lasts about a week in city driving and even longer on highways. Using a fuel consumption app can help optimize driving habits.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

How Many Points Are Deducted for Crossing the Yellow Line in Subject 2?

In the Subject 2 driving test, crossing the yellow line during reverse parking results in immediate failure, with a deduction of 100 points. Below is relevant information: Point deductions in Subject 2: Not using the seatbelt as required; obstructing or turning off in-car audio and video monitoring devices; not following the examiner's instructions; inability to correctly use vehicle controls such as lights and wipers; rolling back more than 30 cm when starting; driving with both hands off the steering wheel; prolonged mismatch between gear and speed, causing excessively high or low engine RPM, etc. Introduction to Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For the C1 license, the test includes five mandatory items: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). Some regions may include a sixth item, high-speed toll card collection. For the C2 license, the test includes four mandatory items: reverse parking, parallel parking, right-angle turns, and curve driving (commonly known as S-turns).
10
5
Share

What is the number of teeth on a gear?

Generally, the number of teeth on a gear is taken as m≥2. Within the same gear group, gears with the same modulus should be used as much as possible; gears with different moduli are only used under special circumstances, such as the final expansion group or back gear group, but generally no more than two types. The principle for determining the number of gear teeth is: compact gear structure size and small spindle speed error. The following is a related introduction about gears: 1. Composition: Generally, it consists of teeth, tooth grooves, end faces, normal faces, addendum circles, dedendum circles, base circles, and pitch circles. 2. Introduction to components: Each protruding part used for meshing, these protruding parts are generally arranged radially, and the teeth on the paired gears contact each other, enabling the gears to continue meshing and operating; the tooth groove is the space between two adjacent teeth on the gear; the end face is the plane perpendicular to the axis of the cylindrical gear or cylindrical worm; the normal face refers to the plane perpendicular to the tooth line of the gear; the addendum circle refers to the circle where the top of the tooth is located; the dedendum circle refers to the circle where the bottom of the groove is located.
2
5
Share

Is the Internet of Vehicles the built-in network of a car?

Internet of Vehicles does not mean being able to access the internet inside a car. It is a massive interactive network. According to the definition by the China IoT Industry Alliance, the Internet of Vehicles (IoV) is a huge interactive network composed of information such as vehicle location, speed, and route. Through devices like GPS, RFID, sensors, and camera image processing, vehicles can collect environmental and status data about themselves. Using internet technology, all vehicles can transmit and aggregate their various information to a central processor. Through computer technology, this vast amount of vehicle information can be analyzed and processed to calculate the optimal routes for different vehicles, report road conditions in real-time, and adjust traffic signal cycles. The built-in 4G network in a car operates using a bound SIM card. The principle of using the built-in 4G network in a car is the same as that of a mobile phone SIM card. Although both the car's 4G network and mobile phone networks use bound SIM cards, the SIM card for cars is specially designed and built into multifunctional vehicles. Even if a mobile phone SIM card could be inserted into a multifunctional vehicle, the system would not recognize it, so the two are not interchangeable.
3
2
Share

Can You Stop During the Second Driving Test?

You can stop during the second driving test. During the second driving test, stopping is allowed as long as it is not an illegal parking. Here is some relevant information about the second driving test: Overview: The second driving test, also known as the small road test, is part of the motor vehicle driver's license assessment and is referred to as the field driving skills test. For small vehicles C1 and C2, the test items include five mandatory components: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions may also include a sixth item: high-speed toll card collection. Teaching Assistance: Teaching Software: Students can learn traffic regulations through driver simulation test software on mobile phones or computers. Teaching Books: "Safe Driving Starts Here," compiled by the Ministry of Transport of the People's Republic of China. Driving schools can uniformly purchase and distribute driving study materials, or students can purchase the materials at their own expense.
18
1
Share

Can You Still Drive a Car with a Flat Tire?

You should not continue driving with a flat tire. Here are the relevant details: Hazards of a flat tire: Continuing to drive with a flat tire can cause significant damage to the vehicle's suspension, transmission, and other systems, and may also deform the wheel rim. Most importantly, it endangers personal safety. As the tire loses its support, the stability of the vehicle body severely decreases, making it highly prone to traffic accidents. Therefore, the immediate priority is to slow down gradually and park the car in a relatively safe place to replace the spare tire or call for assistance. Run-flat tires in case of a flat: Of course, run-flat tires offer relatively higher safety. Even after a flat, they do not lose pressure instantly like regular tires. Their sturdy sidewalls can support the car to drive at speeds below 80km/h for about 80 kilometers. However, it's important to note that if the damage area of the run-flat tire is too large, you should not continue driving as it still poses certain safety risks.
6
0
Share

Can You Still Drive When the Exhaust Malfunction Light Is On?

When the exhaust malfunction light is on, you can still continue driving. Not all exhaust malfunction lights indicate that the vehicle cannot be driven. If the engine malfunction light is on, there are no abnormal noises in the engine compartment, no other abnormal warnings on the dashboard, the vehicle's power is unaffected, and the transmission shifts normally, you can continue driving to a 4S shop for further diagnosis. Issues such as intake or exhaust problems may trigger the engine malfunction light. Introduction: This commonly referred to exhaust malfunction light is also known as the fuel injection system malfunction light. As long as there are no unusual changes in engine power or sound, you can continue driving. This is because the ECU (Engine Control Unit) has a fault substitution program. If any sensor among the many sensors fails, the ECU will use pre-set backup parameters to replace the faulty sensor's data to prevent the vehicle from stalling. For example, if the coolant temperature sensor fails, the ECU will use a backup value of 80 degrees Celsius as the control parameter for fuel injection and ignition. Therefore, while driving is possible, timely repairs are still necessary. If not addressed promptly, the following issues may arise: Deterioration in exhaust gas quality, leading to environmental pollution; increased fuel consumption; elevated combustion chamber temperature and accelerated wear, causing faster engine deterioration; increased engine noise, affecting driving and passenger comfort.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.